In this research work, an attempt was made to machine the titanium (Ti6Al4V) alloy utilizing electric discharge machining technique. The distinct process parameters and its impact on the machining performance were identified using the cause-and-effect diagram (CED). The key process parameters identified by CED diagram were current, pulse on time (Ton), aluminium oxide (Al2O3) powder concentration, and gap distance; experiments were conducted by varying the process parameters, experimental runs were designed using the Taguchi mixed orthogonal array. The experimental results revealed that improvement in material removal rate (MRR) was due to the bridging effect; reduction in tool wear rate (TWR) owing to the expansion of spark gap and enhancement in the surface roughness (Ra) was due to the complete flushing of machined debris. The interaction impact was analysed using the contour plot and with the aid of mathematical modelling experimental fits that were identified and the results were validated utilizing the sensitivity analysis. The obtained results were optimized using the technique for order of preference by similarity to ideal solution (TOPSIS) optimization technique.
To obtain a reasonable relationship between fracture toughness and hardness of a certain material has become a great importance these days. The material for production of any machine parts or for any commodities needs to be tough enough in order to withstand the stress causing deformation, as well as it should be hard enough for resisting any type of surface penetration or abrasion. The fracture toughness was measured by palmqvist method and the hardness was measured by Vickers indentation technique. In general, the higher the hardness of the alloys, the longer was the indentation cracks, indicating a decrease in fracture toughness with increasing hardness. However, at certain hardness, the toughness of individual alloys varied significantly. The fracture toughness and hardness of both WC-Co hard metal vary in opposite ways, if the composition or the microstructure of the materials are varied, but this type of relationship by the entire publisher does not at all agree this theory.
19 October 2020 in Journal of The Institution of Engineers (India): Series C