Creative solutions are needed to support community-dwelling older adults residing in a variety of settings including their house, apartment, or Supportive Apartment Living (SAL) to promote independence and reduce the risk of nursing home replacement. The objective of this study was to gain an understanding of older adults’ needs for physical, mental, and social activities to support the design and functionality of a low-cost mobile assistive robot. A qualitative descriptive study was designed which included three stakeholder focus groups (caregivers, clinicians, and older adults). We held three focus groups with a total of 19 participants: one with paid caregivers (n = 6), one with interdisciplinary clinicians (n = 8), and one with older adults residing in SAL (n = 5). Conventional content analysis was the analytical technique. Four themes emerged: (a) Accomplishing Everyday Tasks: activities of daily living (ADLs) and instrumental activities of daily living (IADLs) were important from the perspectives of all three groups for the older adults to accomplish daily, as well as the “use it or lose it” attitude of the older adults; (b) Personal Connections and Meaningful Activities: for the older adults, it was important for them to engage in socialization and leisure activities, and for the caregivers and clinicians, they work to build personal relationships with the older adults; (c) Cognitive Interventions: the clinicians provided cognitive tools (including reminders, routine and designing interventions) to older adults so they can remain as safe and independent as possible in the SAL; and (d) Safety Measures: encompassed clinicians addressing safety and injury prevention and the caregivers checking in on the older adults in their SAL apartments. This work contributed to the design and functionality specifications for an autonomous low-cost mobile robot for deployment to increase the independence of older adults.
23 January 2018 in IEEE Robotics and Automation Letters
This letter presents a new method for picking objects through quasistatic in-hand manipulation with end-effectors that have no degrees of freedom. Our stable manipulation/grasp planning is achieved with two contacts at fixed distance and the force of gravity, and is provably complete and correct. Practically, our robotic in-hand manipulation technique can facilitate low-cost manipulation and render simple end-effectors such as the parallel-jaw gripper more dexterous in picking, placing, and handing-off objects in case, for example, failing actuated grippers become frozen and it is impossible to exert sufficiently large internal forces. Our picking technique can also be applied to placing objects. Implementation and experimentation on a custom-made direct-drive manipulator and a conventional manipulator are presented. Many experiments were performed for both picking and placing and the results demonstrate usefulness of this method for manipulating a variety of common objects, with different geometries and surface conditions.
26 October 2023 in IEEE Robotics & Automation Magazine
Agricultural robotics and automation technology plays an increasingly critical role across several crop production stages to improve sustainability (e.g., water use optimization). Robotics has been applied for remote and proximal sensing as well as physical sampling. The procedure of physical sampling and follow-on analysis of plant specimens, such as leaves or shoots, which is the focus of this work, often constitutes the only accurate way to measure some essential parameters that affect crop production, such as stem water potential (SWP), which helps determine a crop’s need for watering.
22 June 2018 in IEEE Robotics and Automation Letters
This letter presents a novel robotic manipulation technique that we call robotic edge rolling. It refers to transporting a cylindrical object by rolling on its circular edge, as human workers might maneuver a gas cylinder on the ground. Our robotic edge rolling is achieved by controlling the object to both roll on its bottom edge in contact with the ground and slide on the surface of the robot's end effector. It can thus be regarded as a form of robotic dexterous, in-hand manipulation with nonprehensile grasps. We address the problem of grasp planning for edge rolling by studying how to design appropriately shaped end effectors with zero internal mobility and how to find feasible grasps for stably rolling the object quasi-dynamically with our simple end effectors. An extensive set of experiments is performed with a conventional manipulator arm on not only flat surfaces but also a U-shaped half-pipe track. Long-range edge rolling is demonstrated with a modular mobile manipulator that is capable of active steering control.
10 June 2024 in Computers and Electronics in Agriculture
This letter presents a new grasping approach that utilizes object inertia for picking objects using end-effectors that have no actuated degrees of freedom. The end-effector provides two contacts at a fixed distance, not necessarily antipodal, on two opposing edges of a convex object. The object is dynamically swept off of a position at rest to a goal position at stable rest while maintaining stability throughout the motion by assuring accelerations and torques from the path provide stabilizing forces in the passive gripper. Since the end-effector lacks the ability to close on the object, and the same is only subjected to the force of gravity and the applied external acceleration and torque, no internal forces are applied to the object. Practical applications for this method include very low complexity, affordable end-effectors for pick-and-place applications, and also sensorless transferring of objects in human-robot interaction. Implementation and experimentation using a conventional manipulator with three passive gripper geometries with 11 different common household objects demonstrate usefulness of the proposed method.