A versatile fire test has been developed with a complete set of instrumentation to investigate the fire behaviour of carbon fibre epoxy composite designed for aircraft. During a single test, both condensed and gas phases can be simultaneously studied measuring the temperature profile and the mass loss and studying the nature and quantity of volatile gaseous species. This novel test bench is compliant with two aeronautical certification fire tests: ISO2685:1998(E) and FAR25.856(b):2003. Titanium coupons have been first submitted to fire to validate the testing method. Composite coupons have been evaluated to examine completely their fire behaviour. To go further in the investigation, post-fire analyses have been performed using X-ray microtomographic images of coupons exposed to fire. Thus, the phenomena identified during the test are the apparition of cracks in the virgin material, the thermal degradation, the migration of evolved gases through the material up to both side and the thermal delamination.
Thermophysical properties of a carbon-reinforced epoxy composite laminate (T700/M21 composite for aircraft structures) were evaluated using different innovative characterisation methods. Thermogravimetric Analysis (TGA), Simultaneous Thermal analysis (STA), Laser Flash analysis (LFA), and Fourier Transform Infrared (FTIR) analysis were used for measuring the thermal decomposition, the specific heat capacity, the anisotropic thermal conductivity of the composite, the heats of decomposition and the specific heat capacity of released gases. It permits to get input data to feed a three-dimensional (3D) model given the temperature profile and the mass loss obtained during well-defined fire scenarios (model presented in Part II of this paper). The measurements were optimised to get accurate data. The data also permit to create a public database on an aeronautical carbon fibre/epoxy composite for fire safety engineering.
1 September 2018 in Polymer Degradation and Stability
Based on a phenomenological methodology, a three dimensional (3D) thermochemical model was developed to predict the temperature profile, the mass loss and the decomposition front of a carbon-reinforced epoxy composite laminate (T700/M21 composite) exposed to fire conditions. This 3D model takes into account the energy accumulation by the solid material, the anisotropic heat conduction, the thermal decomposition of the material, the gas mass flow into the composite, and the internal pressure. Thermophysical properties defined as temperature dependant properties were characterised using existing as well as innovative methodologies in order to use them as inputs into our physical model. The 3D thermochemical model accurately predicts the measured mass loss and observed decomposition front when the carbon fibre/epoxy composite is directly impacted by a propane flame. In short, the model shows its capability to predict the fire behaviour of a carbon fibre reinforced composite for fire safety engineering.
Modélisation du comportement d’un composite carbone/époxy soumis au feu: Evènement rare, un incendie au sein ou à l’extérieur d’un avion peut avoir des conséquences catastrophiques pour l’intégrité de l’appareil et de ses occupants. Les aéronefs sont donc dimensionnés pour répondre aux nombreuses exigences définies par les Autorités de certification. Le respect de ces exigences doit être démontré au travers d’essais de certification sur des échantillons de dimensions réduites avec des bruleurs standardisés. Dans une démarche de virtualisation d’essais, le développement d’outils prédictifs du comportement thermophysiques des structures composites soumises à un feu est un objectif ambitieux et très prometteur. Face à la complexité des nombreux phénomènes physiques mis en jeux (thermo-dégradation, dégazage, inflammation de gaz de pyrolyse, érosion, etc.), une méthodologie de modélisation incrémentale a été suivie partant de modèles simples pour aboutir au développement d’un modèle 3D du comportement thermochimique du composite T700/M21 soumis au feu. Ce modèle est basé sur une étude phénoménologique du comportement du composite grâce au développement d’un test au feu innovant et maitrisé. En outre, toutes les données d’entrée sont issues de mesure expérimentale de propriétés thermophysiques en utilisant des méthodes de caractérisation existantes et innovantes. In fine, la comparaison des profils de température et de la perte de masse mesurés du composite avec les résultats numériques montre la capacité du modèle à prédire ce comportement au feu.