Bone tissue engineering is a novel and efficient repair method for bone tissue defects, and the key step of the bone tissue engineering repair strategy is to prepare non-toxic, metabolizable, biocompatible, bone-induced tissue engineering scaffolds of suitable mechanical strength. Human acellular amniotic membrane (HAAM) is mainly composed of collagen and mucopolysaccharide; it has a natural three-dimensional structure and no immunogenicity. In this study, a polylactic acid (PLA)/Hydroxyapatite (nHAp)/Human acellular amniotic membrane (HAAM) composite scaffold was prepared and the porosity, water absorption and elastic modulus of the composite scaffold were characterized. After that, the cell–scaffold composite was constructed using newborn Sprague Dawley (SD) rat osteoblasts to characterize the biological properties of the composite. In conclusion, the scaffolds have a composite structure of large and small holes with a large pore diameter of 200 μm and a small pore diameter of 30 μm. After adding HAAM, the contact angle of the composite decreases to 38.7°, and the water absorption reaches 249.7%. The addition of nHAp can improve the scaffold’s mechanical strength. The degradation rate of the PLA+nHAp+HAAM group was the highest, reaching 39.48% after 12 weeks. Fluorescence staining showed that the cells were evenly distributed and had good activity on the composite scaffold; the PLA+nHAp+HAAM scaffold has the highest cell viability. The adhesion rate to HAAM was the highest, and the addition of nHAp and HAAM could promote the rapid adhesion of cells to scaffolds. The addition of HAAM and nHAp can significantly promote the secretion of ALP. Therefore, the PLA/nHAp/HAAM composite scaffold can support the adhesion, proliferation and differentiation of osteoblasts in vitro which provide sufficient space for cell proliferation, and is suitable for the formation and development of solid bone tissue.

Peripheral nerve injury (PNI) poses a major clinical challenge, frequently resulting in chronic pain, muscle atrophy, and long-term functional impairment. While autologous nerve grafting remains the gold standard for repairing long-gap defects, its application is limited by donor-site morbidity and limited tissue availability. Nerve guidance conduits (NGCs) have emerged as promising alternatives; however, their efficacy remains suboptimal, primarily because most fail to recapitulate the spatiotemporally coordinated regenerative microenvironment required for robust axonal extension, timely remyelination, and durable neurovascular integration. Key limitations of current designs include an inability to balance the bioactivity of natural materials with the tunability of synthetic polymers, insufficient nutrient and oxygen delivery for long-gap repair, and a lack of dynamic, stage-specific regulation of the healing process. Consequently, microenvironment reconstruction represents the central bottleneck to achieving effective regeneration. This review synthesizes recent advances in purposefully rebuilding the NGC microenvironment across three interdependent dimensions: (i) activation and functional regulation of Schwann cells; (ii) immunomodulation to resolve inflammation while promoting repair; (iii) angiogenesis to ensure metabolic support. We place special emphasis on biomaterial strategies, particularly advanced hydrogels that integrate physical, biochemical, and dynamic cues for spatiotemporally programmed regeneration. Finally, we outline design principles and translational considerations for next-generation NGCs aimed at closing the efficacy gap with autografts.

The transplantation of islet beta cells offers an alternative to heterotopic islet transplantation for treating type 1 diabetes mellitus (T1DM). However, the use of systemic immunosuppressive drugs in islet transplantation poses significant risks to the body. To address this issue, we constructed an encapsulated hybrid scaffold loaded with islet beta cells. This article focuses on the preparation of the encapsulated structure using 3D printing, which incorporates porcine pancreas decellularized extracellular matrix (dECM) to the core scaffold. The improved decellularization method successfully preserved a substantial proportion of protein (such as Collagen I and Laminins) architecture and glycosaminoglycans in the dECM hydrogel, while effectively removing most of the DNA. The inclusion of dECM enhanced the physical and chemical properties of the scaffold, resulting in a porosity of 83.62% ± 1.09% and a tensile stress of 1.85 ± 0.16 MPa. In teams of biological activity, dECM demonstrated enhanced proliferation, differentiation, and expression of transcription factors such as Ki67, PDX1, and NKX6.1, leading to improved insulin secretion function in MIN-6 pancreatic beta cells. In the glucose-stimulated insulin secretion experiment on day 21, the maximum insulin secretion from the encapsulated structure reached 1.96 ± 0.08 mIU ml⁻¹, representing a 44% increase compared to the control group. Furthermore, conventional capsule scaffolds leaverage the compatibility of natural biomaterials with macrophages to mitigate immune rejection. Here, incorporating curcumin into the capsule scaffold significantly reduced the secretion of pro-inflammatory cytokine (IL-1β, IL-6, TNF-α, IFN-γ) secretion by RAW264.7 macrophages and T cells in T1DM mice. This approach protected pancreatic islet cells against immune cell infiltration mediated by inflammatory factors and prevented insulitis. Overall, the encapsulated scaffold developed in this study shows promise as a natural platform for clinical treatment of T1DM.

Background/Objectives: Bone-targeted drug delivery systems hold great promise for treating skeletal diseases, yet the optimal strategy for functionalizing lipid nanoparticles (LNPs) with bone-homing ligands remains insufficiently explored. Herein, we compared two alendronate sodium (Alen) modification approaches (pre-conjugation and post-conjugation) for constructing bone-targeted LNPs capable of delivering mRNA to skeletal tissues. Methods: LNPs were fabricated via microfluidic mixing, and the 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-polyethylene glycol-alendronate conjugate (DSPE-PEG-Alen) required for the pre-conjugation method was synthesized. The bone-targeting ability of LNPs prepared by the two Alen modification strategies was evaluated using an in vitro hydroxyapatite (HAP) binding assay. Furthermore, the physicochemical properties, bone-targeting performance, mRNA delivery efficiency, and biosafety of the LNPs prepared by the post-conjugation method were assessed through cellular uptake, in vivo imaging, and other methods. Results: Hydroxyapatite binding assays revealed that the post-conjugation strategy afforded significantly superior bone affinity compared to the pre-conjugation approach. In addition, ex vivo bone fragment binding experiments further confirmed that the bone-targeting LNPs prepared by the post-conjugation method exhibited stronger bone-binding capability compared to unmodified LNPs. The optimized Alen-LNPs demonstrated efficient cellular uptake and functional mRNA translation in bone marrow mesenchymal stem cells with negligible cytotoxicity. In vivo studies in mice confirmed the preferential accumulation of Alen-LNPs in bone tissues, with successful green fluorescent protein (GFP) mRNA translation detected in bone tissue sections. Histopathological analysis confirmed the biosafety of the formulation. Conclusions: This study establishes the post-conjugation strategy as the superior approach for Alen functionalization of LNPs, providing a robust and reproducible platform for bone-targeted mRNA therapeutics.