Multiple-input multiple-output (MIMO) wireless system is a hot research topic in 5th generation mobile communication technology (5G), which can increase the channel capacity of the antenna system to meet new communication demands without changing the bandwidth and transmission power. However, adding the number of antenna elements in a limited space size can lead to mutual coupling effects and impair the communication quality. Therefore, it is significant to design a compact MIMO wireless system using decoupling techniques. Several studies on the reduction of mutual coupling effects have been proposed. However, a concrete overview of the features and resemblances of these decoupling techniques is lacking. In this review, we provide a brief description of the research background on the mutual coupling effect of MIMO. Then, various decoupling techniques worthy of reference are classified and outlined. We further summarize the additional impacts due to the existence of different decoupling structures, and the possible usability and defects of these techniques are revealed clearly in this paper. Finally, a future outlook on the development direction of decoupling techniques for MIMO wireless systems is also concluded and discussed.
We proposed an antenna pair that is applicable for mobile terminals: a type of coupling feed planar antenna that has a size of , a wide band, coupling suppression and compact size. Different from the conventional antenna design, the process of band expansion comes from a dual-band antenna pair and is based on characteristic modes theory (CMA). By observing characteristic current distributions, the optimization emphasis is placed on current sensitive parts in antenna structures, which is an effective method to create or modify resonant points for exciting band potential. Meanwhile, the multiple defective ground structure (DGS) is introduced for isolation enhancement. The −10 dB bandwidth of 3.23–5.24 GHz can be realized, and the isolation of two antenna pairs with only 2 mm spacing is lower (−17.34 dB). The eight-port MIMO system constructed by four proposed antenna pairs has been fabricated. The simulated and measured results of MIMO indicate that its −10 dB operating bandwidth can work at N77/N78/N79/WLAN 5 GHz bands. Moreover, a lower ECC of less than 0.04 and a high efficiency of more than 60% can be obtained, which confirms that it is capable of excellent data transmission as a terminal MIMO antenna system.
To meet the requirements of a high transmission rate and strong communication quality for mobile terminals, a planar antenna printed on a 0.8-mm-thick FR-4 substrate is proposed in this paper. The structures are compact, with a size of The performance of a single antenna pair in a ground plane shows the advantages of both ultra-wide bandwidth and high isolation. The operating frequency of −6 dB is 54% (3.3 GHz–5.9 GHz). To solve the mutual coupling effects exiting in the antenna pair, a hybrid strip defected grounding structure (DGS) is added in the middle of neighboring antenna elements, and good isolation performance of lower than −13 dB is achieved. The evolution and analysis of the proposed antenna pair are given to investigate the operating principle. To verify its practicality, an eight-port antenna system in ground plane is constructed along two frames of the smartphone board. The MIMO antenna system performance is simulated and texted. The results show a bandwidth of 3.4–5.2 GHz (−6 dB), an isolation performance lower than −10 dB, an ECC lower than 0.01, and a total efficiency of 46–84%. In addition, the performance of the antenna system under single handheld conditions is also discussed. The correlation results show that the designed antenna pair has good data transmission and interference resistance capability, which proves that this is an excellent antenna model for application in mobile terminals.
1 January 2026 in IEEE Antennas and Wireless Propagation Letters
The compact and wideband patch antennas applied to WiFi 7 multiple-input multiple-output (MIMO) antenna systems are presented. The MIMO antenna structure consists of four multi-branch radiating patches fed by coupled microstrip lines, which occupies a size of . By exploiting multiple resonant modes, an impedance bandwidth of 37% (5.07–7.37 GHz) achieves a reflection coefficient of less than −10 dB and fully encompasses both WiFi 7 high-frequency ranges. To alleviate mutual coupling, two decoupling structures, named complementary split-ring resonators (CSRRs), are employed between the MIMO elements to interact with the undesirable surface current; furthermore, the proposed orthogonal placement of four elements further minimizes radiation coupling. Consequently, the proposed array achieves measured isolations greater than 14.5 dB and 11 dB at 5 GHz and 6 GHz bands, respectively. The prototype of the proposed MIMO antenna has been manufactured. It has also been measured and the results show similarity with the simulations. The measured radiation pattern and the diversity performance, including the envelope correlation coefficient (ECC), diversity gain (DG), and multiplexing efficiency, are calculated, and they verify the outstanding diversity characteristics of the proposed MIMO antenna. This makes it a promising solution for emerging WiFi 7 wideband applications.
22 January 2026 in IEEE Antennas and Wireless Propagation Letters
This letter proposes a dual-band, dual-polarized shared-aperture antenna for spaceborne applications. Each element integrates one low-frequency band (LB) slot and nine high-frequency band (HB) patches within a compact volume of 0.43λL × 0.43λL × 0.16λL where λL is the vacuum wavelength at LB central frequency. A stepped reflector cavity in the LB antenna and the complementary split-ring resonators (CSRRs) under the HB antennas enhance bandwidth. The 3D-printed dielectric framework enables miniaturization and effectively reduces antenna weight. Although the antennas share the same ground plane, orthogonal polarization ensures cross-band isolation. A nine-element array is fabricated and measured, achieving 32.7% (1.15–1.60 GHz) L-band and 8.1% (5.3–5.75 GHz) C-band impedance bandwidths with voltage standing wave ratio (VSWR) < 2, with cross-band isolation above 24.78 dB and 22.39 dB. At 1.55 and 5.4 GHz for the L-/C-bands, respectively, the measured peak gains reach 12.41 and 22.65 dBi, with corresponding XPDs of 57.04 and 40.89 dB, confirming its potential for satellite payloads.