Atlantic cod is processed industrially for food purposes, with several by-products being directed to animal feed and other ends. Looking particularly into swim bladders, the extraction of collagen can be a valuable strategy for by-product valorization, explored in the present work for the first time. Collagen was extracted using acetic acid (ASCsb) and pepsin (PSCsb) with yields of 5.72% (w/w) and 11.14% (w/w), respectively. SDS-PAGE profile showed that the extracts were compatible with type I collagen. FTIR, CD and XRD results suggest that the PSCsb structure underwent partial denaturation, with microDSC showing a band at 54 °C probably corresponding to a melting process, while ASCsb structure remained intact, with preserved triple helix and a denaturation temperature of 29.6 °C. Amino acid composition indicates that the total content of proline-like amino acids was 148/1000 residues for ASCsb and 141/1000 residues for PSCsb, with a hydroxylation degree of about 37%. The extracts exhibited a typical shear thinning behavior, interesting property regarding their further processing toward the development of biomaterials. In this regard, assessment of metabolic activity of human fibroblast cells cultured in the presence of collagen extracts with concentrations up to 3 mg/mL revealed the absence of cytotoxic behavior. Collagen extracts obtained from Atlantic cod swim bladders shown attractive properties regarding their use in cosmetic or biomedical applications.

The combination of marine origin biopolymers for tissue engineering (TE) applications is of high interest, due to their similarities with the proteins and polysaccharides present in the extracellular matrix of different human tissues. This manuscript reports on innovative collagen-chitosan-fucoidan cryogels formed by the simultaneous blending of these three marine polymers in a chemical-free crosslinking approach. The physicochemical characterization of marine biopolymers comprised FTIR, amino acid analysis, circular dichroism and SDS-PAGE, and suggested that the jellyfish collagen used in the cryogels was not denatured (preserved the triple helical structure) and had similarities with type II collagen. The chitosan presented a high deacetylation degree (90.1%) that can strongly influence the polymer physicochemical properties and biomaterial formation. By its turn, rheology, and SEM studies confirmed that these novel cryogels present interesting properties for TE purposes, such as effective blending of biopolymers without visible material segregation, mechanical stability (strong viscoelastic character), as well as adequate porosity to support cell proliferation and exchange of nutrients and waste products. Additionally, in vitro cellular assessments of all cryogel formulations revealed a non-cytotoxic behavior. The MTS test, live/dead assay and cell morphology assessment (phalloidin DAPI) showed that cryogels can provide a proper microenvironment for cell culturing, supporting cell viability and promoting cell proliferation. Overall, the obtained results suggest that the novel collagen-chitosan-fucoidan cryogels herein presented are promising scaffolds envisaging tissue engineering purposes, as both acellular biomaterials or cell-laden cryogels.

Collagen is a ubiquitous protein present in the extracellular matrix of all major metazoan animals, with approximately 28 different human collagen types described in the literature, each with unique physicochemical properties. Collagens found broad application in the cosmeceutical, pharmaceutical, and biomedical fields and can be isolated from environmentally sustainable sources such as marine byproducts, which are abundant in the fish processing industry and are highly appealing low-cost sources. In this study, marine collagen was isolated from the skins of Greenland halibut (Reinhardtius hippoglossoides), an unexplored byproduct from fish processing plants, using three different collagen extraction methods, due to the use of distinct salting-out methods using a solution of 2.6 M NaCl + 0.05 M Tris-HCl pH = 7.5, (method I); a combination of 0.7 M NaCl followed by a solution of 2.3 M NaCl + 0.05 M Tris-HCl pH = 7.5 (method II); and one method using only 0.9 M NaCl (method III), yielding COLRp_I, COLRp_II, and COLRp_III collagens. These extracted type I collagens were produced with a yield of around 2 and 4% and characterized regarding the physicochemical properties, considering possible biotechnological applications. This work evidenced that the typical triple helix structure conformation was preserved in all extraction methods, but influenced the thermal behavior, intrinsic morphology, and moisture capacity of the collagens, with interest for biotechnological application, as the incorporation as an ingredient in cosmetic formulation. Furthermore, the use of collagen isolated from skin byproducts represents a high economic value with decreasing collagen cost for industrial purposes and is also an environmentally sustainable source for industrial uses.

Collagen is the major structural protein in extracellular matrix present in connective tissues, including skin, being considered a promising material for skin regeneration. Marine organisms have been attracting interest amongst the industry as an alternative collagen source. In the present work, Atlantic codfish skin collagen was analyzed, to evaluate its potential for skincare. The collagen was extracted from two different skin batches (food industry by-product) using acetic acid (ASColl), confirming the method reproducibility since no significant yield differences were observed. The extracts characterization confirmed a profile compatible with type I collagen, without significant differences between batches or with bovine skin collagen (a reference material in biomedicine). Thermal analyses suggested ASColl’s native structure loss at 25 °C, and an inferior thermal stability to bovine skin collagen. No cytotoxicity was found for ASColl up to 10 mg/mL in keratinocytes (HaCaT cells). ASColl was used to develop membranes, which revealed smooth surfaces without significative morphological or biodegradability differences between batches. Their water absorption capacity and water contact angle indicated a hydrophilic feature. The metabolic activity and proliferation of HaCaT were improved by the membranes. Hence, ASColl membranes exhibited attractive characteristics to be applied in the biomedical and cosmeceutical field envisaging skincare.

Arthropods, the largest animal phylum, including insects, spiders and crustaceans, are characterized by their bodies being covered primarily in chitin. Besides being a source of this biopolymer, crustaceans have also attracted attention from biotechnology given their cuticles’ remarkable and diverse mechanical properties. The goose barnacle, Pollicipes pollicipes, is a sessile crustacean characterized by their body parts covered with calcified plates and a peduncle attached to a substrate covered with a cuticle. In this work, the composition and structure of these plates and cuticle were characterized. The morphology of the tergum plate revealed a compact homogeneous structure of calcium carbonate, a typical composition among marine invertebrate hard structures. The cuticle consisted of an outer zone covered with scales and an inner homogenous zone, predominantly organic, composed of successive layers parallel to the surface. The scales are similar to the tergum plate and are arranged in parallel and oriented semi-vertically. Structural and biochemical characterization confirmed a bulk composition of ɑ-chitin and suggested the presence of elastin-based proteins and collagen. The mechanical properties of the cuticle showed that the stiffness values are within the range of values described in elastomers and soft crustacean cuticles resulting from molting. The removal of calcified components exposed round holes, detailed the structure of the lamina, and changed the protein properties, increasing the rigidity of the material. This flexible cuticle, predominantly inorganic, can provide bioinspiration for developing biocompatible and mechanically suitable biomaterials for diverse applications, including in tissue engineering approaches.