Shallow landslides due to hydro-meteorological factors are one of the most common destructive geological processes, which have become more frequent in recent years due to changes in rainfall frequency and intensity. The present study assessed a dynamic, physically based slope stability model, Transient Rainfall Infiltration and Grid-Based Slope Stability Model (TRIGRS), in Idukki district, Kerala, Western Ghats. The study compared the impact of hydrogeomechanical parameters derived from two different data sets, FAO soil texture and regionally available soil texture, on the simulation of the distribution and timing of shallow landslides. For assessing the landslide distribution, 1913 landslides were compared and true positive rates (TPRs) of 68% and 60% were obtained with a nine-day rainfall period for the FAO- and regional-based data sets, respectively. However, a false positive rate (FPR) of 36% and 31% was also seen, respectively. The timing of occurrence of nine landslide events was assessed, which were triggered in the second week of June 2018. Even though the distribution of eight landslides was accurately simulated, the timing of only three events was found to be accurate. The study concludes that the model simulations using parameters derived from either of the soil texture data sets are able to identify the location of the event. However, there is a need for including a high-spatial-resolution hydrogeomechanical parameter data set to improve the timing of landslide event modeling.
Regional quantification of energy and water balance fluxes depends inevitably on the estimation of surface and rootzone soil moisture. The simulation of soil moisture depends on the soil retention characteristics, which are difficult to estimate at a regional scale. Thus, the present study proposes a new method to estimate high-resolution Soil Hydraulic Parameters (SHPs) which in turn help to provide high-resolution (spatial and temporal) rootzone soil moisture (RZSM) products. The study is divided into three phases—(I) involves the estimation of finer surface soil moisture (1 km) from the coarse resolution satellite soil moisture. The algorithm utilizes MODIS 1 km Land Surface Temperature (LST) and 1 km Normalized difference vegetation Index (NDVI) for downscaling 25 km C-band derived soil moisture from AMSR-2 to 1 km surface soil moisture product. At one of the test sites, soil moisture is continuously monitored at 5, 20, and 50 cm depth, while at 44 test sites data were collected randomly for validation. The temporal and spatial correlation for the downscaled product was 70% and 83%, respectively. (II) In the second phase, downscaled soil moisture product is utilized to inversely estimate the SHPs for the van Genuchten model (1980) at 1 km resolution. The numerical experiments were conducted to understand the impact of homogeneous SHPs as compared to the three-layered parameterization of the soil profile. It was seen that the SHPs estimated using the downscaled soil moisture (I-d experiment) performed with similar efficiency as compared to SHPs estimated from the in-situ soil moisture data (I-b experiment) in simulating the soil moisture. The normalized root mean square error (nRMSE) for the two treatments was 0.37 and 0.34, respectively. It was also noted that nRMSE for the treatment with the utilization of default SHPs (I-a) and AMSR-2 soil moisture (I-c) were found to be 0.50 and 0.43, respectively. (III) Finally, the derived SHPs were used to simulate both surface soil moisture and RZSM. The final product, RZSM which is the daily 1 km product also showed a nearly 80% correlation at the test site. The estimated SHPs are seen to improve the mean NSE from 0.10 (I-a experiment) to 0.50 (I-d experiment) for the surface soil moisture simulation. The mean nRMSE for the same was found to improve from 0.50 to 0.31.
Landslides are one of the most widespread natural hazards on earth and has been a major problem in many countries, especially in developing countries. Rainfall induced shallow landslides are ubiquitous on steep terrains of Himalayas, India and are accountable for substantial damage to properties, loss of human lives and livestock. They are densely distributed across territories, very frequent in time and space, and occur without any significant premonitory signals. Due to the surge in occurrence of extreme precipitation events as a result of climate change, rainfall induced landslides have become more frequent in the Himalayas. Since the mountains are becoming increasingly inhabited because of the population expansion, the geohazards like landslides have become more destructible. The Himalayas is one of the most vulnerable areas in the world and is a region of crucial interests. The Himalayas has been receiving surplus amount of rainfall and which is a trigger for devastating landslides along the steep terrains. Prediction of rainfall induced landslides can help the policy makers and local administration to propose appropriate mitigation strategies for unstable and vulnerable terrains.In the present study, a hydrological model is integrated with a dynamic physically based slope stability model for the grid-wise forecasting of the stability of the terrain in the central Himalayas. The model has been optimised and calibrated based on remotely sensed data and multi-temporal landslide inventory corresponding to various landslide inducing precipitation events. HYDRUS 1D platform is used for the hydrological modelling which includes the derivation of SHPs and subsurface soil moisture. The hydrological model with finer resolution SHPs and subsurface soil moisture is later integrated with Transient Rainfall Infiltration and Grid-based Regional Slope-stability (TRIGRS) model to compute the factor of safety of the terrain. The integrated model is validated for the study area with the previous occurrence of the rainfall induced landslides. The integrated model shows higher positive rate for landslide prediction as compared with the utilization of simple slope stability model.Keywords: Himalayas, landslides, HYDRUS 1D, TRIGRS