In this study, poly(vinylidene fluoride) (PVDF)-based nanocomposites filled with surface-functionalized Ag@TiO2 core-shell nanoparticles were fabricated in order to achieve high dielectric permittivities. Using two phosphonic acid surfactants with differing carbon chain lengths, octyl and octadecyl phosphonic acid, the filler surfaces were modified to improve the dispersion of the core-shell filler in PVDF. The experimental results showed that the dielectric constant of the composite with fillers modified using octyl phosphonic acid (148 at 1 kHz) was almost three times that of the material with fillers modified using octadecyl phosphonic acid (58 at 1 kHz) at the same filler loading. The mechanisms of interfacial polarization between the modified core-shell filler and the polymer matrix were analyzed by introducing a circuit model based on AC impedance spectroscopy.
In this paper, nanocomposites that contain core-shell Ag/TiO2 particles as the filler and polytetrafluoroethylene (PTFE) as the matrix were investigated. Two surfactants, namely octyl phosphonic acid (OPA) and pentafluorobenzyl phosphonic acid (PFBPA), were applied to modify Ag/TiO2 fillers for uniform dispersion in the matrix. Fourier transform infrared spectroscopy analysis of bonds between the TiO2 shells and the phosphonic modifiers shows Ti–O–P chemical bonding between the Ag/TiO2 fillers and the modifiers. Thermogravimetric analysis results show a superior adsorption effect of PFBPA over OPA on the Ag/TiO2 filler surface at the same weight percentage. For nanocomposites that contain modified Ag/TiO2 nanoparticles, the loss was reduced despite the high permittivity at the same loading. The permittivity of the nanocomposites by PFBPA is larger than that of OPA, because the more uniform dispersion of inorganic particles in the PTFE matrix enhances the interfacial polarization effect. The mechanism of enhanced dielectric performance was studied and discussed.
This paper investigated a polymer-based composite by homogeneously embedding calcium copper titanate (CaCu3Ti4O12; CCTO) fillers into a polytetrafluoroethylene matrix. We observed the composite filled by CCTO powder at different sizes. The particle size effects of the CCTO filling, including single-size particle filling and co-blending filling, on the microstructure and dielectric properties of the composite were discussed. The dielectric performance of the composite was investigated within the frequency range of 100 Hz to 1 MHz. Results showed that the composite filled by micron/submicron-blended CCTO particles had the highest dielectric constant (εr = 25.6 at 100 Hz) and almost the same dielectric loss (tanδ = 0.1 at 100 Hz) as the composite filled by submicron CCTO particles at the same volume percentage content. We researched the theoretical reason of the high permittivity and low dielectric loss. We proved that it was effective in improving the dielectric property of the polymer-based composite by co-blending filling in this experiment.
Magnetically oriented three-phase composite systems of epoxy resin, aluminum nitride, and nickel have been prepared, the thermal conductivity of composites filled with nickel powder with different particle sizes and content under different applied magnetic fields was studied. The vibrating scanning magnetometer (VSM) and scanning electron microscopy (SEM) were applied to investigate the dispersion of nickel powder in the composites. The results showed that the anisotropic thermal conductivity of the composites treated by applied magnetic field forming chain structure is obtained. The epoxy resin-based composites filled with 30 vol% aluminum nitride with particle size of 1 μm and 2 vol% nickel powder with particle size of 1 μm and aligned with vertical magnetic field have the highest thermal conductivity (1.474 W/mk), which increases the thermal conductivity of the composites by 737% and 58% compared to the pure epoxy resin (0.2 W/mk) and the composites filled with 30 vol% aluminum nitride (0.933 W/mk). In addition, we simulated the influence of nickel powder particles with different particle sizes and arrangements on the thermal conductivity of the composite material in COMSOL Multiphysics software, and the results were consistent with the experimental results.
16 June 2021 in Journal of Wuhan University of Technology-Mater. Sci. Ed.
This paper presents an independently tunable dual-band bandpass filter based on center shorting-stub-loaded resonators. The center shorting-stub-loaded resonator is a dual-mode resonator that generates odd-even modes approximately equal and coupled when the shorting stub is very short. Two different sizes of center shorting-stub-loaded resonators produce two separated resonant frequencies, which are mutually independent. The coupling between the source and load is introduced in the circuit by designing an appropriate coupling structure, and the skirt selectivity of the filter is greatly improved. Four varactor diodes are placed at the two open-circuit ends of the center shorting-stub-loaded resonator to control the two separated resonant frequencies. A prototype of a tunable dual-band filter with Chebyshev response is designed and fabricated. The measured results are in good agreement with the full-wave simulated results. Results show that the first passband varies in a frequency range from 0.81 GHz to 0.95 GHz with a 3 dB fractional bandwidth of 4.2% to 5%, whereas the second passband can be tuned from 1.51 GHz to 1.79 GHz with a 3 dB fractional bandwidth of 6.8% to 8%.