The thermal management of a driving motor is related to the performance and economy of the vehicle. The lumped-parameter thermal network (LPTN) method can provide a model basis for motor temperature-rise control and effectively shorten the development cycle of motor thermal performance design. In this study, an 80 kw water-cooled permanent magnet synchronous motor was used and the accurate thermal model of a motor was built using the LPTN. On the basis of the accurate thermal model, the simplified thermal model of a motor was obtained by reducing the complexity of the model. The temperature-rise test of the end winding and magnetic steel of the motor was carried out under some working conditions. The test conditions were selected according to continuous external characteristics and operating characteristics of the motor. Compared with the experimental results, the temperature-rise error of the two thermal models was less than 5%. The temperature-rise error of the simplified thermal model was less than 3% compared with the accurate thermal model. Therefore, the simplified thermal model can be used to quickly predict the temperature rise of the motor.

The sustainability of diesel engines has come to the forefront of research with the growing global interest in reducing greenhouse gas emissions and improving energy efficiency. The aim of this paper is to support the goal of sustainable development by improving the volatile properties of diesel fuel to promote cleaner combustion in engines. In order to study the effect of diesel fuel volatility on spraying, combustion, and emission, the tests were carried out with the help of the constant volume chamber (CVC) test rig and an engine test rig, respectively. CVC test: A high-speed video camera recorded the spray characteristics of different volatile fuels in a constant-volume combustion bomb. The effects of different rail pressures and ambient back pressures on the spray characteristics were investigated. Engine test: The combustion and emission characteristics of different volatile diesel fuels under different load conditions (25%, 50%, 75%) were investigated in a four-stroke direct-injection diesel engine with the engine speed fixed at 2000 rpm. The test results show that as the rail pressure increases and the ambient pressure decreases, the spray characteristics of the fuels tend to increase; for the more volatile fuels, although reducing the spray tip penetration, the spray projected area and spray cone angle increase, which is conducive to improving the homogeneity of the fuel and air mixing in the cylinder. The improvement of fuel volatility can form more and better-quality mixtures within the ignition delay time (ID), resulting in a 1–2% increase in peak cylinder pressure and a 2–4% increase in peak heat release. For different loads, pre-injection heat release is generated to redefine the ID and combustion duration (CD). Improved fuel volatility effectively reduces carbon monoxide (CO) emissions by about 8–10% and hydrocarbon (HC) emissions by about 13–16%, but it increases nitrogen oxide (NOx) emissions by about 8–11%. Analyzing from the perspective of particulate matter (PM), combined with the aromatic content of volatile fuels, it is recommended to use fuels with moderate volatility and aromatic content under low load conditions, and at medium to large loads, the volatility of the fuel has less weight on particulates and more weight on aromatics, so it is desirable to use the fuel with the lowest volatility and lowest aromatic content of the fuel selected.

DFT screening of 17 rare-earth phthalocyanine single-atom catalysts identifies stable, selective candidates for efficient electrocatalytic nitrogen reduction.