Global water scarcity is a threat that can be alleviated through membrane filtration technologies. However, the widespread adoption of membranes faces significant challenges, primarily due to membrane biofouling. This is the reason why membrane modifications have been under increasing investigation to address the fouling issues. Antibacterial membranes, designed to combat biofouling by eliminating microorganisms, offer a promising solution. Within this study, flat sheet ultrafiltration (UF) membranes with integrated photocatalytic zinc oxide (ZnO) nanoparticles were developed, characterized, and assessed through filtration and fouling tests. The antibacterial properties of the membranes were conducted in static tests using Gram-negative bacteria—Escherichia coli—and natural tap water biofilm. The results demonstrated a notable enhancement in membrane surface wettability and fouling resistance. Furthermore, the incorporation of ZnO resulted in substantial photocatalytic antibacterial activity, inactivating over 99.9% of cultivable E. coli. The antibacterial activity persisted even in the absence of light. At the same time, the persistence of natural tap water organisms in biofilms of modified membranes necessitates further in-depth research on complex biofilm interactions with such membranes.

Flexible antibacterial materials have gained utmost importance in protection from the distribution of bacteria and viruses due to the exceptional variety of applications. Herein, we demonstrate a readily scalable and rapid single-step approach for producing durable ZnO nanoparticle antibacterial coating on flexible polymer substrates at room temperature. Substrates used are polystyrene, poly(ethylene-co-vinyl acetate) copolymer, poly(methyl methacrylate), polypropylene, high density polyethylene and a commercial acrylate type adhesive tape. The deposition was achieved by a spin-coating process using a slurry of ZnO nanoparticles in toluene. A stable modification layer was obtained when toluene was a solvent for the polymer substrates, namely polystyrene and poly(ethylene-co-vinyl acetate). These coatings show high antibacterial efficiency causing >5 log decrease in the viable counts of Gram-negative bacteria Escherichia. coli and Gram-positive bacteria Staphylococcus aureus in 120 min. Even after tapping these coated surfaces 500 times, the antibacterial properties remained unchanged, showing that the coating obtained by the presented method is very robust. In contrast to the above findings, the coatings are unstable when toluene is not a solvent for the substrate.

Membrane filtration is a safe and sustainable water treatment method; however, membrane fouling remains a major challenge that limits its broader application. Modified membranes for fouling mitigation have been extensively studied, including photocatalyst incorporation for organic matter degradation and biofouling control. However, no commercially available photocatalytic membranes exist to date, possibly owing to the lack of understanding of their properties. Furthermore, conventional microbiological test methods commonly used in membrane research are insufficient for accurately assessing membrane antibiofouling properties. Mixed-matrix dual-layer membranes with varying concentrations of zinc oxide nanoparticles were prepared and characterized using multiple testing approaches. Despite achieving >99.999% reduction in cultivable Escherichia coli, viability assays revealed that only half of the cells were dead, with the rest entering a viable but nonculturable (VBNC) state and forming microcolonies, resulting in misleading CFU-based results. Additionally, Pseudomonas aeruginosa biofilm formation was evaluated using fluorescence staining to assess extracellular polymeric substance (EPS) production. While P. aeruginosa survived and multiplied on the photocatalytic membranes, biofilm maturation was inhibited, with EPS protein production reduced by up to 84% compared with the unmodified reference.

The growth and photocatalytic performance of 3D BiOI flowerballs base strongly on synthesis pH and temperature. A superior photocatalytic effect is achieved when BiOI is combined with Bi _p (OH) _q (NO ₃ ) _r at higher pH, forming an efficient heterojunction.