Conversions of furfural and 5-hydroxymethylfurfural as model components in bio-oil were investigated over Ni–Cu/C catalyst with formic acid as hydrogen donor in isopropanol solvent to produce biofuels. The effects of reaction temperature, feed ratio, and reaction time were studied. A high yield of 2-methylfuran up to 91 mol% was obtained from furfural in 8 h at 200°C, and under same conditions 80 mol% yield of 2,5-dimethylfuran could also be obtained from 5-hydroxymethylfurfural in 6 h. The results verified the catalyst performance and the availability of the reaction conditions for producing biofuels from furan derivatives.
The mechanism of the initial reactions in the acid-catalytic conversion of d-xylose/d-xylulose to furfural was studied with density functional theory. The reactions included mutual transformations among d-xylose, d-xylulose and the intermediate of 1,2-enediol. The catalytic performances of several acids including H2SO4, HNO3, HCl, HBr and HI, and the solvent effects of water and THF (tetrahydrofuran) were studied. A simplified kinetic model of the d-xylose/d-xylulose-to-furfural conversion in water solvent was built, with the assumption that the conversion from 1,2-enediol to furfural was the rate-limiting step and could be treated as one-step reaction. The simulation can well fit the experimental regulation, which verifies the rationality of the model simplification. The dominant reaction pathways from d-xylose/d-xylulose to furfural were deduced based on the calculated energy barriers and corresponding reaction rate constants, with different acid catalysis and reaction mediums.