Shenglong Zhang

Dr. Shenglong Zhang


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 August 2021 in Frontiers in Energy Research
Verified
Journal Article
Open access
JWJia Wang
Jia Wang
SZShenglong Zhang
Shenglong Zhang
XHXia Hu
Xia Hu
With the increasing demand for electric vehicles, the high voltage safety of electric vehicles has attracted significant attention. More than 30% of electric vehicle accidents are caused by the battery system; hence, it is vital to investigate the fault diagnosis method of lithium-ion battery packs. The fault types of lithium-ion battery packs for electric vehicles are complex, and the treatment is cumbersome. This paper presents a fault diagnosis method for the electric vehicle power battery using the improved radial basis function (RBF) neural network. First, the fault information of lithium-ion battery packs was collected using battery test equipment, and the fault levels were then determined. Subsequently, the improved RBF neural networks were employed to identify the fault of the lithium-ion battery pack system using the experimental data. The diagnosis test results showed that the improved RBF neural networks could effectively identify the fault diagnosis information of the lithium-ion battery packs, and the diagnosis accuracy was about 100%.

5 July 2017 in Engineering Applications of Computational Fluid Mechanics
Verified
Journal Article
Open access
SZShenglong Zhang
Shenglong Zhang
BZBaoji Zhang
Baoji Zhang
TTTahsin Tezdogan
Tahsin Tezdogan
LXLeping Xu
Leping Xu
YLYuyang Lai
Yuyang Lai
With the rapid development of the computational technology, computational fluid dynamics (CFD) tools have been widely used to evaluate the ship hydrodynamic performances in the hull forms optimization. However, it is very time consuming since a great number of the CFD simulations need to be performed for one single optimization. It is of great importance to find a high-effective method to replace the calculation of the CFD tools. In this study, a CFD-based hull form optimization loop has been developed by integrating an approximate method to optimize hull form for reducing the total resistance in calm water. In order to improve the optimization accuracy of particle swarm optimization (PSO) algorithm, an improved PSO (IPSO) algorithm is presented where the inertia weight coefficient and search method are designed based on random inertia weight and convergence evaluation, respectively. To improve the prediction accuracy of total resistance, a data prediction method based on IPSO-Elman neural network (NN) is proposed. Herein, IPSO algorithm is used to train the weight coefficients and self-feedback gain coefficient of ElmanNN. In order to build IPSO-ElmanNN model, optimal Latin hypercube design (Opt LHD) is used to design the sampling hull forms, and the total resistance (objective function) of these hull forms are calculated by Reynolds averaged Navier–Stokes (RANS) method. For the purpose of this article, this optimization framework has been employed to optimize two ships, namely, the DTMB5512 and WIGLEY III, and these hull forms are changed by arbitrary shape deformation (ASD) technique. The results show that the optimization framework developed in this study can be used to optimize hull forms with significantly reduced computational effort.

1 January 2019 in Engineering Applications of Computational Fluid Mechanics
Verified
Journal Article
Open access
YCYanzhen Chen
Yanzhen Chen
YHYihuai Hu
Yihuai Hu
SZShenglong Zhang
Shenglong Zhang
It is critical to obtain a suitable geometry for a cavitating nozzle of submerged water jet, since a suitable geometry determines its cavitation intensity and cavitation distribution. This paper puts forward a water jet cavitating nozzle optimization platform aiming to improve its axial maximum vapor volume fraction. Considering the influence of all eight geometric parameters of the nozzle itself, a hybrid optimization algorithm is developed to optimize the nozzle by combining with the CFD technique. After the optimization, the optimal geometry results to a 9.41% increment in the axial maximum vapor volume fraction at 50 m underwater depth, and improves the cavitation effect obviously especially in deeper water. From the results, it is found that the cylindrical section diameter, contraction angle and diffusion angle have a great influence on the axial maximum vapor volume fraction, while the inlet diameter have the least effect on the same. The optimization presented in this study can lay the foundation for further study on water jet cavitating nozzle.

1 January 2021 in Engineering Applications of Computational Fluid Mechanics
Verified
Journal Article
Open access
SZShenglong Zhang
Shenglong Zhang
TTTahsin Tezdogan
Tahsin Tezdogan
BZBaoji Zhang
Baoji Zhang
LLLing Lin
Ling Lin
The ship hull form optimization using the Computational Fluid Dynamics (CFD) method is increasingly employed in the early design of a ship, as an optimal ship hull form can obtain good hydrodynamics. However, it is time-consuming due to its many CFD simulations for the optimization. This paper presents a ship hull form optimization loop using the surrogate model, deep belief network (DBN), to reduce the wave-making resistance of the Wigley ship. The prediction performance of the wave-making resistance of the Wigley ship using the DBN method is discussed and compared with the traditional surrogate models found in this study. The results show that the resistance obtained using the deep belief network algorithm is superior to that obtained using the typical surrogate models. Then, a ship hull form optimization framework is built by integrating the Free From Deformation, non-linear programming by quadratic Lagrangian and deep belief network algorithms. The optimization results show that the deep belief network-based ship hull form optimization loop can be used to optimize the Wigley ship. The study presented in this paper could provide a deep learning algorithm for the ship design optimization.

10 July 2017 in Ships and Offshore Structures
Verified
Journal Article
Closed access
SZShenglong Zhang
Shenglong Zhang
TTTahsin Tezdogan
Tahsin Tezdogan
BZBaoji Zhang
Baoji Zhang
LXLeping Xu
Leping Xu
YLYuyang Lai
Yuyang Lai
The seakeeping behavior of a ship in waves is different from its behavior in calm water. The resistance and seakeeping performance of a ship must be considered in the early-stage design. Therefore, this paper proposes a hull form optimization framework aiming to achieve the minimum total resistance in waves using a computational fluid dynamics (CFD) technique. A sinusoidal wave is adopted to establish the numerical wave tank and the overset mesh technique is used to facilitate the motions of the ships in question. The total resistance of the hull in waves is regarded as the objective function which is calculated using the Reynolds averaged Navier–Stokes (RANS) method. The arbitrary shape deformation (ASD) technique is used to change the geometry. Under displacement and design variables, a hybrid algorithm is developed to evaluate the objective function combining the optimal Latin hypercube design (Opt LHD) and the non-linear programming by quadratic Lagrangian (NLPQL) algorithm. Finally, two examples of hull form optimization are presented and discussed for David Taylor Model Basin (DTMB) model 5512 and WIGLEY III cases. The results show the effectiveness of the optimization framework developed in the present study, which can lay the foundation for further optimization of full-scale ships.

Verified
Journal Article
Open access
PDF file
SZShenglong Zhang
Shenglong Zhang
A high−accuracy objective function evaluation method is crucial in ship hull form optimization. This study proposes a novel approximate ship hull form optimization framework using the deep learning technology, deep belief network algorithm. To illustrate the advantages of using the deep belief network algorithm in the prediction of total resistance, two traditional surrogate models (ELMAN and RBF neural networks) are also employed in this study to predict total resistance for different modified ship models. It can be seen from the results that the deep belief network algorithm is more suitable for forecasting total resistance of a DTMB5512 ship model than the traditional surrogate models. Following this, two design variables are selected to alter the bow geometry of the DTMB5512 ship model. The total resistance for different modified ship hulls is estimated using the deep belief network algorithm. Furthermore, an optimal solution with minimum total resistance in a two−dimensional space is obtained using the particle swarm optimization algorithm. The optimization results indicate that the optimization framework using the deep belief network algorithm can obtain an optimal solution with the smallest total resistance for different ship speeds.