Mohammad Mahbubul Alam

Prof. Mohammad Mahbubul Alam

Innovation Engineering, Universita' del Salento, Lecce, Puglia, Italy
+1
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Francesca FerrariFrancesca Ferrari
Francesca Ferrari
RAFFAELLA STRIANIRAFFAELLA STRIANI
RAFFAELLA STRIANI
Daniela FicoDaniela Fico
Daniela Fico
MAMohammad Mahbubul Alam
Mohammad Mahbubul Alam
AGAntonio Greco
Antonio Greco
Carola Esposito CorcioneCarola Esposito Corcione
Carola Esposito Corcione
Bio-based polymers, obtained from natural biomass, are nowadays considered good candidates for the replacement of traditional fossil-derived plastics. The need for substituting traditional synthetic plastics is mainly driven by many concerns about their detrimental effects on the environment and human health. The most innovative way to produce bioplastics involves the use of raw materials derived from wastes. Raw materials are of vital importance for human and animal health and due to their economic and environmental benefits. Among these, wood waste is gaining popularity as an innovative raw material for biopolymer manufacturing. On the other hand, the use of wastes as a source to produce biopolymers and biocomposites is still under development and the processing methods are currently being studied in order to reach a high reproducibility and thus increase the yield of production. This study therefore aimed to cover the current developments in the classification, manufacturing, performances and fields of application of bio-based polymers, especially focusing on wood waste sources. The work was carried out using both a descriptive and an analytical methodology: first, a description of the state of art as it exists at present was reported, then the available information was analyzed to make a critical evaluation of the results. A second way to employ wood scraps involves their use as bio-reinforcements for composites; therefore, the increase in the mechanical response obtained by the addition of wood waste in different bio-based matrices was explored in this work. Results showed an increase in Young’s modulus up to 9 GPa for wood-reinforced PLA and up to 6 GPa for wood-reinforced PHA.

27 July 2026 in Organics
Verified
Journal Article
Open access
PDF file
Md. Shamim AlamMd. Shamim Alam
Md. Shamim Alam
PAProf.Engr.Mashud Ahmed
Prof.Engr.Mashud Ahmed
Abdul BarikAbdul Barik
Abdul Barik
STSamia Jahan Tofa
Samia Jahan Tofa
MUMD KOUSHIC UDDIN
MD KOUSHIC UDDIN
MCMuksit Ahamed Chowdhury
Muksit Ahamed Chowdhury
Due to the rapid development of the textile industry and increased consumption of various textiles composed of both synthetic and natural fibers, large amounts of textile waste are produced, leading to environmental and economic problems on a global scale. Turning textile waste into carbon materials that can be used in a broad range of applications has become a viable solution to address this challenge in terms of sustainability and value generation. Natural and synthetic textile fibers have distinctive molecular structures with relatively high carbon content and variable chemical functionality; therefore, they have been identified as highly promising precursors for fabricating carbon materials with various electrochemical and environmental applications. At the same time, the properties of carbonized and activated textile fibers are strongly dependent on the molecular transformations taking place during thermal treatment and functionalization of textile fibers. This review will provide a comprehensive overview of the molecular evolution of natural and synthetic textile fibers during carbonization and activation processes in terms of dehydration, depolymerization, aromatization, heteroatom preservation, and graphitization mechanisms. The effect of precursor chemical composition, pyrolysis conditions, activation process, and heteroatom incorporation on the structure of carbonized and activated textile fibers and their physical and electrochemical properties will be analyzed. Particular emphasis is placed on electrochemical applications, including capacitive deionization, supercapacitors, electrocatalysis, and emerging smart electrochemical textile systems, highlighting how molecular transformation, pore engineering, and surface chemistry govern charge storage, ion adsorption, and catalytic behavior. In addition, major characterization techniques such as Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area analysis will be reviewed and discussed in relation to understanding the interdependence between molecular structure and material properties. Finally, recent issues related to feedstock heterogeneity, scalability, energy efficiency, and sustainability of processing are highlighted, and future perspectives on multifunctional carbon structures and circular utilization of textile waste are discussed.

14 June 2026 in Polymers
Verified
Journal Article
Open access
PDF file
Md Raihan HossainMd Raihan Hossain
Md Raihan Hossain
MAMohammad Mahbubul Alam
Mohammad Mahbubul Alam
Carola Esposito CorcioneCarola Esposito Corcione
Carola Esposito Corcione
RAFFAELLA STRIANIRAFFAELLA STRIANI
RAFFAELLA STRIANI
Md. Shamim AlamMd. Shamim Alam
Md. Shamim Alam
The performance of drug-loaded electrospun nanofibres is governed not only by drug content but also by the spatial distribution of the drug within the fibre matrix, which determines release kinetics and biological response. Here, we demonstrate that dose-dependent surface crystallisation of dexamethasone (DEX) in electrospun polycaprolactone (PCL)/gelatin nanofibres controls drug release behaviour and subsequent macrophage-mediated inflammation. Nanofibre mats containing 0, 1, and 2 wt% DEX (PG0, PG1, PG2) were fabricated and systematically characterised. Scanning electron microscopy revealed a change from homogeneous fibres (PG0) to surface-decorated crystalline domains with increasing drug loading, which indicates a supersaturation-driven phase separation during electrospinning. This morphological evolution directly governs the transport behaviour: PG2 exhibits a pronounced burst release due to surface-localised drug, whereas PG1 shows a balanced release profile with both surface-accessible and matrix-embedded drug fractions. Release characteristics result in different biological outcomes. PG1 and PG2 strongly inhibit pro-inflammatory cytokines (TNF-α and IL-6) in LPS-stimulated macrophages (~70–75% reduction), confirming retained drug bioactivity. However, higher drug loading (PG2) leads to lower fibroblast viability and compromised mechanical integrity. Importantly, PG1 shows a desirable balance of controlled drug release, cytocompatibility (>90% viability) and mechanical performance (~8 MPa) with effective anti-inflammatory activity. Degradation studies also show controlled structural evolution without destabilisation upon pH change, demonstrating suitability for wound environments. These results reveal surface crystallisation as an important design parameter for electrospun drug delivery systems and demonstrate that optimal therapeutic performance is controlled by intermediate drug loading, not maximum loading, providing a mechanistic framework for the rational design of immunomodulatory wound dressings.

1 July 2026 in Processes
Verified
Journal Article
Open access
PDF file
BMBadhon C. Mazumder
Badhon C. Mazumder
AFAbdullah Al Fariz
Abdullah Al Fariz
MHMohammad Mosharof Hossain
Mohammad Mosharof Hossain
SMSahin Alom Momin
Sahin Alom Momin
MUMD KOUSHIC UDDIN
MD KOUSHIC UDDIN
Carola Esposito CorcioneCarola Esposito Corcione
Carola Esposito Corcione
The increasing demand for cleaner coloration of synthetic textiles has renewed interest in plant-based dyes; however, limited dye–fiber affinity and shade durability remain major challenges in nylon dyeing. This study developed a mordant-free dyeing process for nylon fabric using Terminalia catappa leaf extract by optimizing extraction pH, dyebath pH, dyeing time, and temperature. Mature T. catappa leaves were aqueously extracted under acidic, neutral, and alkaline conditions, followed by systematic dyeing optimization. The dyed fabrics were evaluated using color strength (K/S), CIELAB color coordinates, standard fastness tests, FTIR spectroscopy, and FE-SEM analysis. Alkaline extraction followed by acidic dyeing produced the highest dye uptake. The optimum condition was extraction pH 11, dyebath pH 3, 120 °C, and 60 min, yielding a maximum K/S value of 21.94 with ΔL, Δa, and Δb values of −54.25, 8.03, and 24.92, respectively. FTIR and SEM results supported possible dye–fiber interaction through hydrogen bonding, electrostatic attraction, and surface/inter-filament dye deposition without obvious fiber damage. The optimized fabric showed very good washing, dry rubbing, perspiration, and saliva fastness, good light fastness, excellent ultraviolet protection, and slightly lower wet rubbing fastness. Overall, T. catappa leaf extract offers a promising mordant-free route for durable nylon coloration.

31 October 2023 in Journal of Textile Engineering & Fashion Technology
Verified
Journal Article
Open access
PDF file
MAMohammad Mahbubul Alam
Mohammad Mahbubul Alam
KMKazi Sifat Muntasir
Kazi Sifat Muntasir
ASAkash Kumar Saha
Akash Kumar Saha
FAFadia Afrin
Fadia Afrin
USUmme Salma
Umme Salma
In this study, an attempt was taken to dye conventional and microfibre polyester filaments with disperse dye and evaluate their different dyeing effects in similar dyeing condition.The main attention was given to find out K/S values, color difference and different colorfastness properties (light and wash fastness) and also the amount of dyes addition required for microfibre polyester filaments to get the same depth of shade as conventional one’s.There were three different hues (Red, Navy and Green) of 5 different shades (0.5%, 1.5%,3%, 4% and 6%) were used. The result shows that, microfibre polyester requires higher amount of dyes due to more surface area and greater absorbing capability of it. Almost similar light fastness was found in both conventional and microfibre polyester filaments and lower wash fastness properties of microfibre filaments when compared to those of conventional polyester.

4 August 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Md. Shamim AlamMd. Shamim Alam
Md. Shamim Alam
MAMohammad Mahbubul Alam
Mohammad Mahbubul Alam
Md Raihan HossainMd Raihan Hossain
Md Raihan Hossain
PAProf.Engr.Mashud Ahmed
Prof.Engr.Mashud Ahmed
Abdul BarikAbdul Barik
Abdul Barik
Zahra RajabimashhadiZahra Rajabimashhadi
Zahra Rajabimashhadi
Smart textiles have progressed from conventional passive sensing fabrics to advanced cyber-physical systems capable of integrating sensing, actuation, computation, and wireless communication within a single textile platform. With a focus on circular economy principles, this review critically examines intelligent textile ecosystems, from material architectures to AI-enabled wearable platforms. The functional hierarchy in-volves passive (sensing), active (sensing + response) and ultra-smart (autonomous deci-sion-making) textiles. The four classes of materials are metallic conductors, carbonaceous nanomaterials (CNTs and graphene), conductive polymers (PEDOT:PSS) and bio-based alternatives. Integration is achieved by coating, weaving, printing and additive manu-facturing. Energy autonomy is achieved by five harvesting mechanisms: piezoelectric (1–10 µW·cm⁻²), triboelectric (10–100 µW·cm⁻²), thermoelectric (20–50 µW·cm⁻²), photovol-taic (100–1000 µW·cm⁻²) and bioelectrochemical (1–5 µW·cm⁻²). Hybrid systems can run continuously. Flexible supercapacitors and thin-film batteries are used for energy stor-age. The combination of AI and IoT allows for multi-tier architectures that encompass edge processing (TinyML), gateway management, and cloud analytics. On-device in-ference reduces energy consumption by 60-80%, improves privacy and enables real-time anomaly detection using CNNs, LSTMs and autoencoders. Sustainability is considered by life cycle assessment, which quantifies impacts across extraction, fabrication, use, and end-of-life of materials. Circular strategies: Design for disassembly, harmonisation of materials, biodegradable electronics, and recycling routes are all important. We critically evaluate key challenges such as manufacturing scalability, washability, biocompatibility, and regulatory standardisation. This review provides a unifying framework that con-nects materials science, electronics, AI and sustainable design, providing a roadmap for circular, intelligent and energy-autonomous textile systems in line with UN SDGs (3, 9, 12, 13).