Chatter is a key factor affecting tool wear, workpiece surface quality and cutting efficiency. When milling thin-walled parts, it is difficult to extract the chatter frequency band due to the time-varying characteristics of the dynamic parameters of the machining system. Variational mode decomposition (VMD) shows good performance in signal processing, but the decomposition result of this algorithm is limited by the influence of initialization parameters. Therefore, this paper proposes a scheme to determine the number of VMD decomposition layers based on the number of Fourier transform frequency peaks. The feasibility of the scheme is verified by the simulation signal and experiment signal. The results show that taking the peak number of the spectrum as the decomposition level of VMD, the spectrum distribution of the decomposed intrinsic mode function (IMF) is clear, and the frequency band containing rich chatter information can be effectively extracted.
14 December 2025 in Journal of Measurements in Engineering
In modern industry, thin-walled components have become critical elements in high-end manufacturing due to their unique structure and lightweight properties. However, their production process is prone to chatter, which severely impacts machining quality and efficiency. Although ultrasonic vibration grinding technology can partially suppress chatter, the issue remains unresolved. To address this, this paper proposes an online chatter monitoring method based on an improved convolutional neural network (ICS-CNN) and the Sparrow Optimization Algorithm (SSA). This approach enhances key information capture through multi-scale feature extraction and attention mechanisms, while incorporating residual connections and a feature pyramid structure to strengthen the model's ability to identify subtle chatter characteristics. Input signals undergo frequency domain analysis and filtering to improve data quality. The SSA algorithm is further employed to optimise network parameters, constructing the SSA-ICS-CNN intelligent monitoring model. Experimental results demonstrate an identification accuracy of 98.37 % with a decision time of merely 147 milliseconds, while visualisation techniques validate its discrimination precision. Compared to conventional convolutional neural networks, this approach achieves significant improvements in both recognition accuracy and response speed, effectively overcoming limitations inherent in traditional methods reliant on manual feature extraction and dynamic response delays.
27 July 2025 in Journal of Measurements in Engineering
High-speed cutting of titanium alloy has the advantages of high processing efficiency, reducing tool wear, and obtaining good surface quality, but there is a lack of research on the influence of chip shape on machining parameter selection mechanism in the cutting process, which hinders the development of high-speed milling quality of titanium alloy. In this paper, the shape of titanium alloy (Ti6Al4V) chips at different speeds and different temperatures were simulated. With the increase of cutting speed, the tool squeezes the workpiece material, causing it to undergo elastic deformation and thereby forming a cutting layer. As the cutting process progresses, the chip gradually takes on a serrated shape, the degree of sawtooth sharpening of chips was analyzed. The formation mechanism of chips and the formation process of sawtooth chips during right-angle cutting were analyzed. The locust optimization algorithm was used to optimize the multi-objective parameters, and it was found that high performance machining effect could be achieved by using large feed speed, radial cutting depth and spindle speed.