Nadeem Abbas

Dr. Nadeem Abbas

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 October 2022 in Materials
Verified
Journal Article
Open access
PDF file
Tariq UmarTariq Umar
Tariq Umar
MYMuhammad Yousaf
Muhammad Yousaf
MAMuhammad Akbar
Muhammad Akbar
NANadeem Abbas
Nadeem Abbas
ZHZahoor Hussain
Zahoor Hussain
WAWajahat Sammer Ansari
Wajahat Sammer Ansari
Structural materials sustainability is gaining popularity across the globe at present. Reusing natural resources, building, demolition debris, and solid waste are the most apparent tools to make construction more environmentally friendly. Traditional concrete is believed to be less durable, stronger, environmentally friendly, and socially and commercially feasible than industrial waste concrete. The evolution of non-destructive testing (NDT) across time has not been investigated in depth by researchers. An experimental study was carried out to propose the use of non-destructive mechanisms that would enable us to assess concrete’s compressive strength without causing destruction. Varying quantities of industrial waste (coal bottom ash (CBA) and waste glass sludge (WGS)) were incorporated to cast concrete prisms (150 mm × 150 mm × 150 mm). The results obtained helped us to establish relationships between the compressive strength of concrete and the Schmidt hammer rebound value, as well as the ultrasonic pulse velocities. Microstructural analysis showed that incorporating 10% of CBA and WGS improved the porosity of concrete specimens, which shows the applicability of these industrial wastes as partial cement replacements. Scanning electron microscopy (SEM) showed traces of calcium alumino-silicate hydrate (C-A-S-H), portlandite and C-S-H, which indicates the binder characteristics of CBA and WGS. The concept of the response surface approach (RSM) for optimizing cement and industrial waste substitution was validated by the polynomial work expectation. The model was statistically significant when the fluctuation of ANOVA was analyzed using a p value with a significance level of 0.05. The study results show that the usage of 15% CBA and 10% WGS as a cementitious additive and cement replacement has the potential to increase the strength of concrete significantly.

19 January 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NANadeem Abbas
Nadeem Abbas
Tariq UmarTariq Umar
Tariq Umar
RSRania Salih
Rania Salih
MAMuhammad Akbar
Muhammad Akbar
ZHZahoor Hussain
Zahoor Hussain
XHXiong Haibei
Xiong Haibei
Due to the complexity of underground environmental conditions and operational incidents, advanced and accurate monitoring of the underground metro shield tunnel structures is crucial for maintenance and the prevention of mishaps. In the past few decades, numerous deep learning-based damage identification studies have been conducted on aboveground civil infrastructure. However, a few studies have been conducted for underground metro shield tunnels. This paper presents a deep learning-based damage identification study for underground metro shield tunnels. Based on previous experimental studies, a numerical model of a metro tunnel was utilized, and the vibration data obtained from the model under a moving load analysis was used for the evaluation. An existing deep auto-encoder (DAE) that can support deep neural networks was utilized to detect structural damage accurately by incorporating raw vibration signals. The dynamic analysis of a metro tunnel FEM model was conducted with different severity levels of the damage at different locations and elements on the structure. In addition, root mean square (RMS) was used to locate the damage at the different locations in the model. The results were compared under different schemes of white noise, varying levels of damage, and an intact state. To test the applicability of the proposed framework on a small dataset, the approach was also utilized to investigate the damage in a simply supported beam and compared with two deep learning-based methods (SVM and LSTM). The results show that the proposed DAE-based framework is feasible and efficient for the damage identification, damage size evaluation, and damage localization of the underground metro shield tunnel and a simply supported beam with comparison of two deep models.

12 March 2024 in Frontiers in Materials
Verified
Journal Article
Open access
QSQamar Shahzad
Qamar Shahzad
NANadeem Abbas
Nadeem Abbas
MAMuhammad Akbar
Muhammad Akbar
ESEhab Sabi
Ehab Sabi
BTBlessen Skariah Thomas
Blessen Skariah Thomas
MAMuhammad Usman Arshid
Muhammad Usman Arshid
The limitations in the available reinforcing methods have accompanied the increasing popularity of 3D Concrete Printing (3DCP). Incorporating steel fibers as reinforcement is a promising approach to overcome these limitations. However, the impact of the printing process on the alignment of these fibers is not well understood. Therefore, the objective of this research is to quantitatively analyze the distribution of steel fiber alignment in 3D printed concrete. To achieve this, digital image analysis was employed to assess the influence of nozzle diameter, print speed, and fiber content on fiber alignment in both mold-cast and 3D-printed samples. UHPC matrix without fiber addition and fiber reinforced UHPC composites with brass-coated steel fiber contents of 1.5% and 3% by volume fraction were printed. Furthermore, Material nozzles ranging from 10 mm to 40 mm in size were employed and printing speeds of 15, 25, 35, and 45 mm/s were adjusted. Subsequently, the study examined the implications of fiber alignment on the hardened performance of printed specimens and compared them with conventionally mold-cast samples. The findings of the study demonstrated that increasing the fiber content and using smaller diameter nozzles during the printing procedure led to significant improvements in fiber orientation along the printing direction. As a result, the mechanical performance of the printed samples showed a substantial enhancement compared to the specimens produced through mold casting, primarily due to the improved fiber alignment.

14 July 2020 in Materials
Verified
Journal Article
Open access
PDF file
RSRania Salih
Rania Salih
FZFangyuan Zhou
Fangyuan Zhou
NANadeem Abbas
Nadeem Abbas
AMAamir Khan mastoi
Aamir Khan mastoi
In this study, the cyclic behavior of reinforced concrete (RC) beam with openings strengthened using carbon fiber-reinforced polymers (FRPs) was experimentally investigated. Seven rectangular RC beams were cast and strengthened through external bonding of carbon fiber-reinforced polymer (CFRP) sheets around the beam web opening with different orientations to evaluate the maximum resistance, secant stiffness, strength degradation, ductility, energy dissipation capacity and behavior of the specimens’ failure mode under cyclic load. One solid beam without an opening (i.e., control specimen) and six beams constructed with circular web openings typically located in the middle of the beam and adjacent to the supports were used in the experiments. Among the six specimens with opening configuration, two beams were unstrengthened, and the remaining four specimens were strengthened with two layers of FRP sheets with vertical and inclined scheme orientation. Numerical studies were performed on ABAQUS software, and finite element modelling analysis results were verified through experiments. Results demonstrated that the use of FRP sheets has a significant effect on the cyclic behavior of RC beams, thereby improving the maximum strength and ultimate displacement to approximately 66.67% and 77.14%, respectively. The validated finite element models serve as a numerical platform to apply beneficial parametric studies, where the effects of opening size and bond length are investigated.

1 January 2022 in Construction and Building Materials
Verified
Journal Article
Closed access
JCJiawei Chen
Jiawei Chen
HXHaibei Xiong
Haibei Xiong
TFTomoki Furuta
Tomoki Furuta
YLYurong Lu
Yurong Lu
NANadeem Abbas
Nadeem Abbas

1 January 2021 in Journal of Engineered Fibers and Fabrics
Verified
Journal Article
Open access
PDF file
Jawad AhmadJawad Ahmad
Jawad Ahmad
FAFahid Aslam
Fahid Aslam
RMRebeca Martínez-García
Rebeca Martínez-García
JPJesús de Prado-Gil
Jesús de Prado-Gil
NANadeem Abbas
Nadeem Abbas
MOMohamed Hechmi Ei Ouni
Mohamed Hechmi Ei Ouni
Fibers are one of the most prevalent methods to enhance the tensile capacity of concrete. Most researchers focus on steel fiber reinforced concrete which is costly and easily corroded. This study aims to examine the performance of polypropylene fiber reinforced concrete through different tests. PPFs were added into concrete blends in a percentage of 1.0%, 2.0%, 3.0%, and 4.0% by weight of cement to offset its objectionable brittle nature and improve its tensile capacity. The fresh property was evaluated through slump cone test and while mechanical strength was evaluated through compressive strength, split tensile strength flexure strength, and flexure cracking behaviors after 7-, 14-, and 28-days curing. Results indicate that slump decrease with the addition of PPFs while fresh density increase up to 2.0% in addition to PPFs and then decreases. Similarly, strength (compressive strength; split tensile strength, and flexure strength) was increased up to 2.0% addition of PPFs and then decrease gradually. It also suggests that Ductility; first crack load, maximum crack width, and load-deflection inter-relations were considerably improved due to incorporations of PPFs.