Large-displacement microelectromechanical system (MEMS) scanners are in high demand for a wide variety of optical applications. Kirigami, a traditional Japanese art of paper cutting and folding, is a promising engineering method for creating out-of-plane structures. This paper explores the feasibility and potential of a kirigami-inspired electrothermal MEMS scanner, which achieves large vertical displacement by out-of-plane film actuation. The proposed scanner is composed of film materials suitable for electrothermal self-reconfigurable folding and unfolding, and microscale film cuttings are strategically placed to generate large displacement. The freestanding electrothermal kirigami film with a 2 mm diameter and high fill factor is completely fabricated by careful stress control in the MEMS process. A 200 μm vertical displacement with 131 mW and a 20 Hz responsive frequency is experimentally demonstrated as a unique function of electrothermal kirigami film. The proposed design, fabrication process, and experimental test validate the proposed scanner’s feasibility and potential for large-displacement scanning with a high fill factor.
This paper proposes an electrothermally-actuated circular pyramidal kirigami microscanner with a millimeter-range low-power lens drive for endoscopic biomedical applications. A variation of Japanese origami art, kirigami involves creation of out-of-plane structures by paper cutting and folding. The proposed microscanner is composed of freestanding kirigami film on which the spiral-curved thermal bimorphs are strategically placed. The kirigami microscanner is electrothermally transformed into an out-of-plane circular multistep pyramid by Joule heating. The circular pyramidal kirigami microscanner on a small footprint of 4.5 mm × 4.5 mm was fabricated by microelectromechanical system processes. A large four-step pyramidal actuation was successfully demonstrated, and a large 1.1-mm lens travel range at only 128 mW was achieved.
We have developed a novel micro optical diffusion sensor (MODS) with a newly proposed comb-driven–micro Fresnel mirror (CD–MFM) scanner to detect structural changes in biological samples. By controlling the fringe spacing of the excitation laser beam, we can tune the decay time to obtain quick and precise measurements. In this study, the pre-tilted mirror is rotated by vertical comb-driven actuators; the resulting change in the mirror angle alters the fringe spacing. The validity of the proposed mirror scanner is confirmed in simulations and in an experiment using a fabricated prototype device.
We have developed a novel nanoscale temperature-measurement method using fluorescence in the near-field called Fluorescence Near-field Optics Thermal Nanoscopy (Fluor-NOTN). Fluor-NOTN enables the temperature distributions of nanoscale materials to be measured in vivo/in situ. The proposed method measures temperature by detecting the temperature dependent fluorescence lifetimes of Cd/Se Quantum Dots (QDs). For a high-sensitivity temperature measurement, the auto-fluorescence generated from a fiber probe should be reduced. In order to decrease the noise, we have fabricated a novel near-field optical-fiber probe by fusion-splicing a photonic crystal fiber (PCF) and a conventional single-mode fiber (SMF). The validity of the novel fiber probe was assessed experimentally by evaluating the auto-fluorescence spectra of the PCF. Due to the decrease of auto-fluorescence, a six- to ten-fold increase of S/N in the near-field fluorescence lifetime detection was achieved with the newly fabricated fusion-spliced near-field optical fiber probe. Additionally, the near-field fluorescence lifetime of the quantum dots was successfully measured by the fabricated fusion-spliced near-field optical fiber probe at room temperature, and was estimated to be 10.0 ns.
21 August 2007 in International Journal of Thermophysics
Kirigami design principles have been widely applied to develop thermally responsive shape-morphing devices across various scales. However, the multi-degree-of-freedom (multi-DoF) morphing capabilities of microelectromechanical-systems (MEMS)-scale kirigami devices under localized Joule heating remain largely unexplored. This paper presents a quadrant kirigami-type electrothermal MEMS actuator with multi-DoF morphing capabilities, demonstrating both one-dimensional piston motion and two-dimensional (2D) tilting motion. The actuator, fabricated using surface and bulk micromachining techniques, features four independent electrical circuits, creating four electrothermally separated quadrants within the MEMS-scale kirigami structure. The temperature distribution within each quadrant of the actuator, subjected to localized Joule heating, was experimentally examined using thermography, revealing distinct temperature contrasts. The actuator demonstrated multi-DoF morphing capabilities, achieving a 2D tilting angular displacement of approximately 10° at 70 mW and a vertical piston displacement of 1.5 mm at 135 mW. These experimental results validate that the electrothermal quadrant design, leveraging localized Joule heating, enhances the DoF morphing capabilities of kirigami-type electrothermal MEMS actuators.