We calculate a low-frequency surface impedance of a dirty, -wave superconductor with an imperfect surface incorporating either a thin layer with a reduced pairing constant or a thin, proximity-coupled normal layer. Such structures model realistic surfaces of superconducting materials which can contain oxide layers, absorbed impurities, or nonstoichiometric composition. We solved the Usadel equations self-consistently and obtained spatial distributions of the order parameter and the quasiparticle density of states which then were used to calculate a low-frequency surface resistance and the magnetic penetration depth as functions of temperature in the limit of local London electrodynamics. It is shown that the imperfect surface in a single-band -wave superconductor results in a nonexponential temperature dependence of at which can mimic the behavior of multiband or -wave superconductors. The imperfect surface and the broadening of the gap peaks in the quasiparticle density of states in the bulk give rise to a weakly temperature-dependent residual surface resistance. We show that the surface resistance can be optimized and even reduced below its value for an ideal surface by engineering at the surface using pair-breaking mechanisms, particularly by incorporating a small density of magnetic impurities or by tuning the thickness and conductivity of the normal layer and its contact resistance. The results of this work address the limit of in superconductors at , and the ways of engineering the optimal density of states by surface nanostructuring and impurities to reduce losses in superconducting microresonators, thin-film strip lines, and radio-frequency cavities for particle accelerators.
16 December 2016 in Superconductor Science and Technology
The theory of the superconductor–insulator–superconductor (SIS) multilayer structure for application in superconducting accelerating cavities is reviewed. The theoretical field limit, optimum layer thicknesses and material combination, and surface resistance are discussed for the SIS structure and are also reviewed for the superconductor–superconductor bilayer structure.
We propose a theory of nonlinear surface resistance of a dirty superconductor in a strong radio-frequency (rf) field, taking into account magnetic and nonmagnetic impurities, finite quasiparticle lifetimes, and a thin proximity-coupled normal layer characteristic of the oxide surface of many materials. The Usadel equations were solved to obtain the quasiparticle density of states (DOS) and the low-frequency surface resistance as functions of the rf field amplitude . It is shown that the interplay of the broadening of the DOS peaks and a decrease of a quasiparticle gap caused by the rf currents produces a minimum in and an extended rise of the quality factor with the rf field. Paramagnetic impurities shift the minimum in to lower fields and can reduce in a wide range of . Subgap states in the DOS can give rise to a residual surface resistance while reducing at higher temperatures. A proximity-coupled normal layer at the surface can shift the minimum in to either low and high fields and can reduce below that of an ideal surface. The theory shows that the behavior of changes as the temperature and the rf frequency are increased, and the field dependence of can be very sensitive to the materials processing. Our results suggest that the nonlinear rf losses can be minimized by tuning pair-breaking effects at the surface using impurity management or surface nanostructuring.
We investigate the effects of Dynes pair-breaking scattering rate on the superfluid flow in a narrow thin-film superconductor and a semi-infinite superconductor by self-consistently solving the coupled Maxwell and Usadel equations for the BCS theory in the diffusive limit for all temperature , all , and all superfluid momentums. We obtain the depairing current density and the current-dependent nonlinear kinetic inductance in a narrow thin film and the superheating field and the current distribution in a semi-infinite superconductor, taking the nonlinear Meissner effect into account. The analytical expressions for , and are also derived. The theory suggests and can be ameliorated by reducing , and can be tuned by a combination of the bias current and . Tunneling spectroscopy can test the theory and also give insight into how to engineer via materials processing. Implications of the theory would be useful to improve performances of various superconducting quantum devices.
A multilayered structure with a single superconductor layer and a single insulator layer formed on a bulk superconductor is studied. General formulae for the vortex-penetration field of the superconductor layer and the magnetic field on the bulk superconductor, which is shielded by the superconductor and insulator layers, are derived with a rigorous calculation of the magnetic field attenuation in the multilayered structure. The achievable peak surface field depends on the thickness and its material of the superconductor layer, the thickness of the insulator layer, and material of the bulk superconductor. The calculation shows a good agreement with an experimental result. A combination of the thicknesses of superconductor and insulator layers to enhance the field limit can be given by the formulae for any given materials.
26 August 2016 in Physical Review Accelerators and Beams
Recent studies by Romanenko et al. revealed that cooling down a superconducting cavity under a large spatial temperature gradient decreases the amount of trapped flux and leads to reduction of the residual surface resistance. In the present paper, the flux expulsion ratio and the trapped-flux-induced surface resistance of a large-grain cavity cooled down under a spatial temperature gradient up to are studied under various applied magnetic fields from 5 to . We show the flux expulsion ratio improves as the spatial temperature gradient increases, independent of the applied magnetic field: our results support and enforce the previous studies. We then analyze all rf measurement results obtained under different applied magnetic fields together by plotting the trapped-flux-induced surface resistance normalized by the applied magnetic field as a function of the spatial temperature gradient. All the data can be fitted by a single curve, which defines an empirical formula for the trapped-flux-induced surface resistance as a function of the spatial temperature gradient and applied magnetic field. The formula can fit not only the present results but also those obtained by Romanenko et al. previously. The sensitivity of surface resistance from trapped magnetic flux of fine-grain and large-grain niobium cavities and the origin of dependence of are also discussed.