Simone Grimaldi

Mr. Simone Grimaldi


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 December 2019 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
RRRaul Rondon
Raul Rondon
Aamir MahmoodAamir Mahmood
Aamir Mahmood
SGSimone Grimaldi
Simone Grimaldi
Mikael GidlundMikael Gidlund
Mikael Gidlund
This article evaluates the quality-of-service performance and scalability of the recently released Bluetooth Mesh protocol and provides general guidelines on its use and configuration. Through extensive simulations, we analyzed the impact of the configuration of all the different protocol’s parameters on the end-to-end reliability, delay, and scalability. In particular, we focused on the structure of the packet broadcast process, which takes place in time intervals known as Advertising Events and Scanning Events. Results indicate a high degree of interdependence among all the different timing parameters involved in both the scanning and the advertising processes and show that the correct operation of the protocol greatly depends on the compatibility between their configurations. We also demonstrated that introducing randomization in these timing parameters, as well as varying the duration of the Advertising Events, reduces the drawbacks of the flooding propagation mechanism implemented by the protocol. Using data collected from a real office environment, we also studied the behavior of the protocol in the presence of WLAN interference. It was shown that Bluetooth Mesh is vulnerable to external interference, even when implementing the standardized limitation of using only 3 out of the 40 Bluetooth Low Energy frequency channels. We observed that the achievable average delay is relatively low, of around 250 ms for over 10 hops under the worst simulated network conditions. However, results proved that scalability is especially challenging for Bluetooth Mesh since it is prone to broadcast storm, hindering the communication reliability for denser deployments.

10 December 2018 in IEEE Access
Verified
Journal Article
Open access
SGSimone Grimaldi
Simone Grimaldi
Aamir MahmoodAamir Mahmood
Aamir Mahmood
MGMikael Gidlund
Mikael Gidlund
Energy sampling-based interference detection and identification (IDI) methods collide with the limitations of commercial off-the-shelf (COTS) IoT hardware. Moreover, long sensing times, complexity and inability to track concurrent interference strongly inhibit their applicability in most IoT deployments. Motivated by the increasing need for on-device IDI for wireless coexistence, we develop a lightweight and efficient method targeting interference identification already at the level of single interference bursts. Our method exploits real-time extraction of envelope and model-aided spectral features, specifically designed considering the physical properties of signals captured with COTS hardware. We adopt manifold supervised-learning (SL) classifiers ensuring suitable performance and complexity trade-off for IoT platforms with different computational capabilities. The proposed IDI method is capable of real-time identification of IEEE 802.11b/g/n, 802.15.4, 802.15.1 and Bluetooth Low Energy wireless standards, enabling isolation and extraction of standard-specific traffic statistics even in the case of heavy concurrent interference. We perform an experimental study in real environments with heterogeneous interference scenarios, showing 90%–97% burst identification accuracy. Meanwhile, the lightweight SL methods, running online on wireless sensor networks-COTS hardware, ensure sub-ms identification time and limited performance gap from machine-learning approaches.

Verified
Journal Article
Open access
PDF file
SGSimone Grimaldi
Simone Grimaldi
Aamir MahmoodAamir Mahmood
Aamir Mahmood
Mikael GidlundMikael Gidlund
Mikael Gidlund
In recent years, the adoption of industrial wireless sensor and actuator networks (IWSANs) has greatly increased. However, the time-critical performance of IWSANs is considerably affected by external sources of interference. In particular, when an IEEE 802.11 network is coexisting in the same environment, a significant drop in communication reliability is observed. This, in turn, represents one of the main challenges for a wide-scale adoption of IWSAN. Interference classification through spectrum sensing is a possible step towards interference mitigation, but the long sampling window required by many of the approaches in the literature undermines their run-time applicability in time-slotted channel hopping (TSCH)-based IWSAN. Aiming at minimizing both the sensing time and the memory footprint of the collected samples, a centralized interference classifier based on support vector machines (SVMs) is introduced in this article. The proposed mechanism, tested with sample traces collected in industrial scenarios, enables the classification of interference from IEEE 802.11 networks and microwave ovens, while ensuring high classification accuracy with a sensing duration below 300 ms. In addition, the obtained results show that the fast classification together with a contained sampling frequency ensure the suitability of the method for TSCH-based IWSAN.

18 December 2020 in IEEE Industrial Electronics Magazine
Verified
Journal Article
Closed access
SGSimone Grimaldi
Simone Grimaldi
Aamir MahmoodAamir Mahmood
Aamir Mahmood
Syed Ali HassanSyed Ali Hassan
Syed Ali Hassan
Mikael GidlundMikael Gidlund
Mikael Gidlund
Gerhard HanckeGerhard Hancke
Gerhard Hancke
The limited coexistence capabilities of current Internet of Things (IoT) wireless standards produce inefficient spectrum utilization and mutual performance impairment. The problem becomes critical in industrial IoT (IIoT) applications, which have stringent quality-of-service (QoS) requirements and very low error tolerance. The constant growth of wireless applications over unlicensed bands mandates then the adoption of dynamic spectrum-access techniques, which can significantly benefit from interference mapping over multiple dimensions of the radio space. In this article, we analyze the critical role of real-time interference detection and classification mechanisms that rely on only IIoT devices, without the added complexity of specialized hardware. The tradeoffs between classification performance and feasibility are analyzed in connection with the implementation on low-complexity IIoT devices. Moreover, we explain how to use such mechanisms for enabling IIoT networks to construct and maintain multidimensional interference maps at runtime in an autonomous fashion. Finally, we give an overview of the opportunities and challenges of using interference maps to enhance the performance of IIoT networks under interference.

14 August 2020 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
HFHossam Farag
Hossam Farag
SGSimone Grimaldi
Simone Grimaldi
Mikael GidlundMikael Gidlund
Mikael Gidlund
PÖPatrik Österberg
Patrik Österberg
In the perspective of the emerging Industrial Internet of things (IIoT), the 6TiSCH working group has been created with the main goal to integrate the capabilities of the IEEE 802.15.4e Time-Slotted Channel Hopping (TSCH) with the IPv6 protocol stack. In order to support time-critical applications in IIoT, reliable real-time communication is a key requirement. Specifically, aperiodic critical traffic, such as emergency alarms, must be reliably delivered to the DODAG root within strict deadline bounds to avoid system failure or safety-critical situations. Currently, there is no mechanism defined in the 6TiSCH architecture for timely and reliably handling of such traffic and its prioritization over the non-critical one. In this paper, we introduce REA-6TiSCH, a reliable emergency-aware communication scheme to support real-time communications of emergency alarms in 6TiSCH networks. In REA-6TiSCH, the aperiodic emergency traffic is opportunistically enabled to hijack transmission cells pre-assigned for the regular periodic traffic in the TSCH schedule. Moreover, we introduce a distributed optimization scheme to improve the probability that an emergency flow is delivered successfully within its deadline bound. To the best of our knowledge, this is the first approach to incorporate emergency alarms in 6TiSCH networks. We evaluate the performance of REA-6TiSCH through extensive simulations and the results show the effectiveness of our proposed method in handling emergency traffic compared to Orchestra scheme. Additionally, we discuss the applicability of REA-6TiSCH and provide guidelines for real implementation in 6TiSCH networks.

2 March 2020 in IEEE Access
Verified
Journal Article
Open access
SGSimone Grimaldi
Simone Grimaldi
LMLukas Martenvormfelde
Lukas Martenvormfelde
Aamir MahmoodAamir Mahmood
Aamir Mahmood
Mikael GidlundMikael Gidlund
Mikael Gidlund
The lack of coordinated spectrum access for IoT wireless technologies in unlicensed bands creates inefficient spectrum usage and poses growing concerns in several IoT applications. Spectrum awareness becomes then crucial, especially in the presence of strict quality-of-service (QoS) requirements and mission-critical communication. In this work, we propose a lightweight spectral analysis framework designed for strongly resource-constrained devices, which are the norm in IoT deployments. The proposed solution enables model-based reconstruction of the spectrum of single radio-bursts entirely onboard without DFT processing. The spectrum sampling exploits pattern-based frequency sweeping, which enables the spectral analysis of short radio-bursts while minimizing the sampling error induced by non-ideal sensing hardware. We carry out an analysis of the properties of such sweeping patterns, derive useful theoretical error bounds, and explain how to design optimal patterns for radio front-ends with different characteristics. The experimental campaign shows that the proposed solution enables the estimation of central frequency, bandwidth, and spectral shape of signals at runtime by using a strongly hardware-limited radio platform. Finally, we test the potential of the proposed solution in combination with a proactive blacklisting scheme, allowing a substantial improvement in real-time QoS of a radio link under interference.