Ruizhou Wang

Dr. Ruizhou Wang

Guangdong University of Technology, Guangzhou, Guangdong, China
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 August 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Ruizhou WangRuizhou Wang
Ruizhou Wang
XZXianmin Zhang
Xianmin Zhang
Planar parallel three-degrees-of-freedom (3-DOF) nanopositioning systems have been widely applied in scanning probe microscopy, micro-/nanomanipulation, nanoimprint lithography, and precision machining. Two effective optimization approaches are proposed to enhance the system performance in this paper. First, seven indexes are involved in modeling a nanopositioning platform to evaluate the mechanism performance. Four constraints are also considered. A general analysis, optimization, and decision-making method to select better structure parameters is presented. Prototype test results demonstrate high accuracy of the proposed modeling approach and efficiency of the optimization method. Second, precision, accuracy, and velocity are three main indexes to evaluate a nanopositioning system. Different simulated loads are added to test the system performance. Servocontrol parameters of both three input ports and the end effector are optimized using a multiobjective particle swarm optimization algorithm. Experimental results validate the performance of the optimization module and selected parameters. Two parameters optimization approaches are helpful to enhance the performance of a planar parallel 3-DOF nanopositioning system.

1 June 2020 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
Ruizhou WangRuizhou Wang
Ruizhou Wang
HWHeng Wu
Heng Wu
HWHan Wang
Han Wang
XZXianmin Zhang
Xianmin Zhang
Multi-degree-of-freedom (multi-DOF) nanopositioning stages (NPSs) have rapidly growing applications in the spatial micro-/nano-machining and manipulation. Compliant parallel mechanisms (CPMs) demonstrate advantages to achieve a large output stiffness and high payload. A four-DOF NPS based on six-branched-chain CPMs is proposed in this paper. First, a mechanism design approach is introduced. One primary vertical DOF is generated using three parallel-kinematic lever amplifiers. A three-revolute-revolute-revolute mechanism acts as the kinematic configuration to produce three secondary planar DOFs. Three types of single-axis and one type of double-axis notch flexure hinges (NFHs) are employed to realize the nanoscale displacement/movement guiding, transferring, and decoupling. Second, a stiffness modeling approach is derived. Combined with exact compliance matrices of 54 NFHs and 95 flexible beams, a four-DOF high-efficiency stiffness model of the six-branched-chain CPM is built. The calculation procedure of the whole input/output stiffnesses and coupling ratios takes 12.06 ms. Simulation and prototype test results validate the calculation accuracy. For example, the maximum calculation deviation of input stiffnesses is verified to be 4.52% and 8.18%, respectively. The two proposed approaches contribute to the statics parameter optimization of spatial multi-DOF NPSs.

1 November 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
Ruizhou WangRuizhou Wang
Ruizhou Wang
HWHeng Wu
Heng Wu
Piezoelectric actuators (PEAs) and compliant parallel mechanisms (CPMs) are advantageous for designing nanopositioning stages (NPSs) with multiple degrees of freedom (multi-DOFs). This paper proposes a new NPS that uses PEAs and CPMs with multiple spatial DOFs. First, the design of the mechanism is introduced. Six parallel kinematics revolute-revolute-revolute-revolute (RRRR) branched chains were used to create a 6-RRRR CPM for superior mechanical performance. Three in-plane and three out-of-plane chains were combined using a two-in-one structure to ensure fabrication feasibility. A two-in-one 6-RRRR CPM was employed to build the proposed NPS. Second, the mechanical performance was analyzed. High-efficiency finite-element modeling approaches were derived using the compliance-based matrix method (CMM) and a pseudo-rigid body model (PRBM). The model included both 6-RRRR CPM and NPS. The simulation results validated the static and dynamic performance, and the experimental results verified the kinematics. Based on the newly designed mechanism and verified mechanical performance, the proposed 6-RRRR NPS contributes to the development of spatial multi-DOF NPSs using PEAs and CPMs.

10 July 2025 in Chinese Journal of Mechanical Engineering
Verified
Journal Article
Open access
PDF file
Ruizhou WangRuizhou Wang
Ruizhou Wang
LYLong Yang
Long Yang
ZLZhouliang Li
Zhouliang Li
HWHua Wang
Hua Wang
XZXianmin Zhang
Xianmin Zhang
Laser direct imaging (LDI) machines are advantageous for the fabrication of printed circuit boards (PCBs). Before digital lithography, a vision-based measurement (VBM) system was used to calibrate PCBs. However, calibration accuracy and efficiency are affected by multiple disturbances. To improve the accuracy and enhance the robustness of the VBM system, we propose a piezoelectric-actuated kangaroo-inspired bionic compliant mechanism (BioCM) and a flying-focusing VBM controller. A piezoelectric actuator (PEA) generates highly accurate motion. The CM transfers the motion without losing accuracy or producing couplings. The kangaroo-inspired bionic differential structure enlarges the magnification of the PEA-CM. A BioCM-based VBM system was also constructed. A static analysis of the BioCM was conducted using the compliance matrix approach, and dynamics results were obtained. To enhance the service performance of the PEA-BioCM, we developed a flying-focusing VBM controller. PEG-based flying, PEA-actuated focusing, and MEMF-enhanced RRHT algorithms were used. A BioCM prototype was fabricated. Several prototype tests were conducted on the statics and dynamics. The prototype test results verified the performance of the BioCM and flying-VBM controller. Service test results demonstrated the calibration accuracy and robustness of the PEA-BioCM-based flying-VBM system. The proposed BioCM and controller can contribute to the development of next-generation LDI machines for fabricating high-density PCBs.

22 February 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
Ruizhou WangRuizhou Wang
Ruizhou Wang
HWHeng Wu
Heng Wu
Micro-vision possesses high in-focus-plane motion tracking accuracy. Unfortunately, out-of-focus-plane displacements cannot be avoided, decreasing the in-focus-plane tracking accuracy of micro-vision. In this paper, a spatial nanopositioner is proposed to evaluate the out-of-focus-plane performance of a micro-vision system. A piezoelectric-actuated spatial multi-degree-of-freedom (multi-DOF) nanopositioner is introduced. Three in-plane Revolute-Revolute-Revolute-Revolute (RRRR) compliant parallel branched chains produce in-focus-plane motions. Three out-of-plane RRRR chains generate out-of-focus-plane motions. A typical micro-vision motion tracking algorithm is presented. A general grayscale template matching (GTM) approach is combined with the region of interest (ROI) method. The in-focus-plane motion tracking accuracy of the micro-vision system is tested. Different out-of-focus-plane displacements are generated using the proposed nanopositioner. The accuracy degradation of the in-focus-plane motion tracking is evaluated. The experimental results verify the evaluation ability of the proposed nanopositioner.

1 October 2025 in Smart Materials and Structures
Verified
Journal Article
Closed access
Ruizhou WangRuizhou Wang
Ruizhou Wang
PLPeihan Liu
Peihan Liu
HWHua Wang
Hua Wang
XZXianmin Zhang
Xianmin Zhang
Flying-vision-based calibration (FVC) guarantees the alignment accuracy of laser direct imaging for digital lithography. Unfortunately, disturbances to the flexible substrate via warping reduce the FVC accuracy. A pigeon-inspired bionic compliant mechanism (BioCM) is designed to develop a robust FVC system. Two differential lever amplifiers increase the magnification ratio within a compact design domain. A pair of pigeon-inspired multihinge S-type flexible beams reduces the stress during high-frequency focusing steps. The levers and beams are combined into the BioCM. A compliance analysis and structural optimisation approach optimises the BioCM. A flying controller is developed for the flying-photography BioCM. The test results demonstrate that the pigeon-inspired BioCM improves the FVC accuracy when disturbances occur.