Owing to their high deformation ability, 4D printed structures have various applications in origami structures, soft robotics and deployable mechanisms. As a material with programmable molecular chain orientation, liquid crystal elastomer is expected to produce the freestanding, bearable and deformable three-dimensional structure. However, majority of the existing 4D printing methods for liquid crystal elastomers can only fabricate planar structures, which limits their deformation designability and bearing capacity. Here we propose a direct ink writing based 4D printing method for freestanding continuous fiber reinforced composites. Continuous fibers can support freestanding structures during the printing process and improve the mechanical property and deformation ability of 4D printed structures. In this paper, the integration of 4D printed structures with fully impregnated composite interfaces, programmable deformation ability and high bearing capacity are realized by adjusting the off-center distribution of the fibers, and the printed liquid crystal composite can carry a load of up to 2805 times its own weight and achieve a bending deformation curvature of 0.33 mm−1 at 150 °C. This research is expected to open new avenues for creating soft robotics, mechanical metamaterials and artificial muscles.
We present the first realized three-dimensional (3D) practical implementation of the so called “optical black hole” in microwave frequencies, an electromagnetic (EM) concentrator. The 3D EM wave concentrator was designed with non-resonant gradient index (GRIN) 3D woodpile photonic crystals (PCs) structure in metamaterial regime, and fabricated by Stereolithography (SL) process. Omnidirectional EM wave capture and absorbing ability of the device in a broad bandwidth (12GHz-15GHz) were validated by full-wave simulation and experiments. Such devices may have applications in microwave energy harvesting and radiation detector.
A free-space broadband carpet-cloak, designed based on transformations optics and quasi-conformal mapping, was realized with all-dielectric gradient index rod-connected diamond-structured photonic crystals (PCs) in metamaterial regime. Complex three-dimensional sample with smooth continuous changing unit cells was fabricated precisely by stereolithography (SL) using photo-curable resin. Thus, by gradually varying the unit cell constitutive parameters of the diamond-based PCs with nearly isotropic properties, the required complex spatial distribution of the refractive index profile was ideally achieved to reduce the scattering of the electromagnetic wave. The non-resonant property of the sub-wavelength PCs unit cell resulted in broad bandwidth and relatively low loss.