In this paper, we proposed a multilayer terahertz absorber composed of hybrid graphene and vanadium dioxide (VO₂). Based on electrical controlling of graphene and thermal tuning of VO₂, three different switchable absorption states are achieved in one structure. When VO₂ is in the metal phase and the Fermi level of graphene is set as 0eV, high-frequency broadband (bandwidth, 5.45THz) absorption from 4.5 to 9.95THz is demonstrated. While VO₂ is switched to the insulator state, absorption states depend on the Fermi energy of graphene. As the Fermi level changes from 1eV to 0eV, the absorption can be switched from low-frequency broadband (bandwidth, 2.86THz) to dual-frequency absorption. The effect of geometric parameters and fabrication tolerance on the robustness of the absorption properties is explored. The proposed absorber has three switchable states through modulation of graphene and VO₂, which is expected to realize potential applications in modulating, filtering, detecting, and other fields.

A reflective metasurface that can form a non-diffraction beam is proposed in this article. This metasurface is designed based on the artificial admittance modulation surface, and the metallic square patch on the grounded dielectric substrate is utilized to construct the whole surface. The beam can change its propagation direction with the change of frequency and have good non-diffraction characteristics. The metasurface is fabricated, and the measurement results demonstrate good performance of generating non-diffraction beams.

We use a single-layer thick metallic metasurface to design the 0-,45- and 90-degree polarizers with transmission efficiencies exceeding 95% based on the bright electric dipole resonance and dark magnetic dipole resonance. In addition, we utilize a bilayer metallic metasurface (forming an efficient Fabry-Perot resonator) to propose a circularly polarizing dichroism waveplate (CPDW). The circular polarization dichroism (CPD = I _RCP − I _LCP .) in the transmission mode at 1.6 µm wavelength reaches 89% and the extinction ratio (ER = I _RCP /I _LCP ) is 830:1. These four polarizing elements are integrated to form a full Stokes pixel that almost accurately measures arbitrary polarized light at λ₀ = 1.6 µm (including elliptically polarized light).

A hexagonal lattice silicon (Si) metasurface formed by the displacement of two mirrored isosceles trapezoid blocks in opposite directions is integrated into an InGaAs/InP photodetector to sense the circularly polarized light, whose optical properties mainly are controlled by the Fabry-Pérot (FP) cavity mode supported in the air slit called the Tunnel A. The Si metasurface can also be equivalent to the combination of the electric quadrupole (EQ) and the magnetic quadrupole (MQ) for the right circularly polarized (RCP) mode and the magnetic quadrupole for the left circularly polarized (LCP) mode. The external quantum efficiency of the circular polarization photodetectors is 0.018 and 0.785 for the RCP and LCP incidence, respectively. In addition, the full Stokes pixel based on the six-image-element technique can almost accurately measure arbitrary polarized light at 1550 nm operation wavelength, whose errors of the degree of linear polarizations (Dolp) and the degree of circular polarizations (Docp) are less than 0.01 and 0.15, respectively.

A super-resolution (with λ/50 resolution ability at mid-infrared region) device that consists of a monolayer graphene sandwiched between two dielectric materials with two alternate chemical potentials in graphene (which can be obtained by alternately applying two biased voltages to graphene) is proposed and analyzed. When the subwavelength resolution is achieved, the graphene-based device can be viewed as an effective optical medium with alternate arrangement of positive and negative refractive indices. And the isofrequency dispersion curves of the effective optical medium have the hyperbolic form. Furthermore, the super-resolution at different desired frequencies can be reached by merely changing the chemical potentials of graphene. The proposed devices have potential applications in multi-functional material, real-time subwavelength imaging, and high-density optoelectronic components for using the abnormal diffraction feature.

A large bandwidth and high-efficiency subwavelength quarter-wave plate (QWP) is an indispensable component of an integrated miniaturized optical system. The bandwidth of existing plasmonic quarter-wave plates with a transmission efficiency of more than 50% is less than 320 nm in the near-infrared band. In this paper, a metallic quarter-wave plate with a bandwidth of 600 nm (0.95–1.55 µm) and an average transmittance of more than 70% has been designed and shows excellent potential to be used in miniaturized optical polarization detection systems and as an optical data storage device. For TE mode incident waves, this miniaturized optical element can be equivalent to a Fabry-Pérot (FP) resonator. Meanwhile, for the TM mode incident wave, the transmission characteristics of this structure are controlled by gap surface plasmon polaritons (G-SPPs) existing in the symmetric metal/insulator/metal (MIM) configuration.