During the material preparation process, the magnetic field can act with high intensity energy on the material without contact and affect its microstructure and properties. This non-contact processing method, which can change the microstructure and properties of material without affecting the shape and size of products, has become an important technical means to develop new materials and optimize the properties of materials. It has been widely used in scientific research and industrial production. In recent years, the magnetic field assisted processing of difficult-to-deform materials or improving the performance of complex and precision parts has been rapidly and widely concerned by scholars at home and abroad. This paper reviews the research progress of magnetic field regulating the microstructure, and properties of solid metal materials. The effects of magnetic field-assisted heat treatment, magnetic field assisted stretching, and magnetic field independent treatment on the microstructure and properties of solid metal materials are introduced. The mechanism of the magnetic field effect on the properties of metal materials is summarized, and future research on the magnetic field effect on solid metal has been prospected.

The effect of a pulsed magnetic field on the microstructure of a QAl9-4 aluminium bronze alloy was studied in this work. It was found that the dislocation density, grain boundary angle, and microhardness of the alloy significantly changed after the magnetic field treatment with a peak magnetic induction intensity of 3T, pulse duration of about 100 us, pulse interval of 10 s, and pulse time of 360. EBSD was used to test the KAM maps of the alloy microzone. It was found that the alloy’s dislocation density decreased by 10.88% after the pulsed magnetic field treatment; in particular, the dislocation in the deformed grains decreased significantly. The quantity of dislocation pile-up and the degree of distortion around the dislocation were reduced, which decreased the residual compressive stress on the alloy. Dislocation motion caused LAGB rotation, which reduced the misorientation of adjacent points inside the grain. The magnetic field induced the disappearance of deformation twins and weakened the strengthening effect of twins. The microhardness test results show that the alloy’s microhardness decreased by 8.06% after pulsed magnetic field treatment. The possible reasons for the magnetic field effect on dislocation were briefly discussed. The pulsed magnetic field might have caused the transition to the electronic energy state at the site of dislocation pinning, which led to free movement of the vacancy or impurity atom. The dislocation was easier to depin under the action of internal stress in the alloy, changing the dislocation distribution and alloy microstructure.

The microstructure and mechanical properties of Al-0.35Fe alloys with a series of different zirconium (Zr) additions from 0.1 to 0.4% are investigated by optical microscopy, scanning electron microscopy, transmission electron microscopy and tensile testing. The as-cast structure of the alloys varies with the Zr content. When the content of Zr is 0.1%, Zr dissolves into the aluminum (Al) matrix completely and iron (Fe) concentrates along the boundary in a network of eutectic Al₃Fe. With the increase in Zr content to 0.2% and above, nanoscale Al₃Zr particles appear in the alloy. With the Zr content increasing from 0.1 to 0.4%, the grain size of the Al matrix decreases from 73 to 23 μm. The morphology of the eutectic Al₃Fe phase changes from short rod-like to an agglomerated structure consisting of finer and shorter rod-like shapes. The tensile and yield strengths increase while the total elongation decreases with increasing Zr content. The strengthening mechanism of the alloy can be attributed to the combination of fine-grain, solution and second-phase strengthening.

To improve the mechanical properties and wear resistance of QAl9-4 aluminum bronze alloy parts of high-speed rail brake calipers, the solid aluminum bronze alloy was treated with a pulsed magnetic field in which the magnetic induction intensity was 3T at room temperature. After that, a tensile test and a friction and wear test were carried out on the alloy. The results indicate that the magnetic field promotes the movement of low-angle grain boundaries less than 2° and splices to form subcrystals or fine crystals, which reduces the mean grain size of the alloy. The disordered dislocation changed into a locally ordered dislocation line, the dislocation distribution became uniform, and the dislocation density increased, which simultaneously improved the alloy’s tensile strength and elongation. The elongation increased by 10.2% compared with that without the magnetic field. The increase in strength can provide strong support for the wear-resistant hard phase, and the enhancement of plasticity can increase the alloy’s ability to absorb frictional vibration. Therefore, it was hard for cracks to form and extend, and the specimen’s average friction coefficient was reduced by 22.05%. The grinding crack width and depth decreased, the wear debris became more uniform and fine, and the alloy’s wear resistance increased.