The process of formation of the upper part of a raw cotton bundle was examined. We proposed a method for kinematic analysis of mechanisms of the cotton-processing machines, including a mechanical bundling press, and developed an algorithm for its computer implementation. The proposed method makes it possible to obtain equations for determining the kinematic parameters of a mechanism for the formation of the upper part of a cotton bundle at the assigned law of the motion of a drive link, which is the cam. We experimentally studied the possibility of forming the upper part of a bundle with the required density of cotton, which ensures stability of the formed bundle. Taking into account the influence of density of raw cotton in the bundle on the adhesion between waste and cotton, and based on the impact of this on the cleaning effect, we conducted theoretical and experimental research. The study performed allowed us to determine the density of raw cotton in a bundle depending on the time and height of the bundle, and to investigate the influence of waste adhesion on the ginning effect.
Studies on the dynamic state of cotton raw materials when introducing working bodies of processing machines into it allow to draw the following proposition. Depending on the rate of penetration of the working body into the cotton medium and the density of the medium, in the formulas used to describe the state of the medium, the exponent у ρ can vary from 1.5 to 3. The exponent for density ρ is a measure of the compression and compaction of raw materials on the surface of the working body. The exponent of ρ is also related to the amount of damage to cotton fibers and seeds. For the first time, a cotton mass is considered as a compressible porous two-component medium consisting of a mixture of cotton fibers and air included in the composition of a porous medium, which is essential in dynamic processing processes, and it must be taken into account when planning technological modes. From experiments on the penetration of a splitter with a peripheral speed u=3.5 m/s into a cotton medium with a density of ρ=150–350 kg/m3, it can be seen that a locally located “air cushion” appears in the close vicinity of the split end. The pressure in it increases by 1.5–2 times in comparison with the pressure of statistical compression of cotton fibers alone, without taking into account the influence of the air located in the pores of the system. The forces of compression of cotton fibers from the action of the splitter and the force of volumetric action on the fibers are comparable in the area of the "air cushion". Using the general equations of the mechanics of the compressed medium, as well as experimental data, the fundamental equation of the dynamic state of the mass of raw cotton when the working body of the processing machine is introduced into it, such as the density of the medium, the speed of the working body, its external shape and the degree of surface treatment, is derived. The resulting equation can be used to describe the power stresses in a cotton environment in the technological processes of roller and saw ginning, and during cotton cleaning
25 July 2019 in Eastern-European Journal of Enterprise Technologies
This paper reports a theoretical study into the saw-type-grate section of a large litter cleaner in mounted cleaners that operate on a cotton harvester, as well as the theoretical and experimental justifications for its parameters. The effect exerted by a mounted cleaner on the process of cleaning raw cotton when processing in a cotton gin has been studied. A theoretical model of the impact of grates on weeds in cleaning processes has been developed. A condition for repelling the litter by grates and removing it from a cotton technological flow has been studied. The use of grates with a flat-shaped front edge allows for a steady reduction in the amount of damage in the raw cotton fiber, which improves the fiber quality and leads to a decrease in the number of defects and debris. The experimental and theoretical studies have produced evidence that enables the efficient operation of mounted-type cleaning machines in the cotton-cleaning industry. The movements of raw cotton as a viscoelastic body at the free impact of litter with the teeth of the saw against a stationary surface of the grate were investigated; the force schemes between the grates and saws were considered. The effect of a saw-type drum on the technological properties of raw cotton was investigated, namely on seed damage and the formation of the free fiber. A model of interaction between weed particles and grates was considered; the trajectories of the litter flight were shown in the function of the slope of the grate and the recovery factor. The issues of the relationship between the physical-mechanical properties of raw cotton, the elastic characteristics of raw cotton, and the impact force of cotton flies against the grate with a flat working face. Solving these issues could make it possible to determine the optimal structure of the raw cotton cleaning mechanisms, which would improve the effectiveness of cleaning raw cotton from weeds. Based on the identified functional links, it has become possible to construct new or improve existing structures of the saw-type grate section of mounted cleaners. Practical experience shows that the use of the designed structure in large litter cleaners of the mounted type produces a significant increase in the cleaning effect of the machine Проведено теоретическое исследование пильчато-колосниковой секции очистителя крупного сора в навесных очистителях, функционирующей на хлопкоуборочной машине, теоретические и экспериментальные обоснования его параметров. Изучены влияния навесного очистителя на технологический процесс очистки хлопка-сырца при переработке на хлопкозаводе. Разработана теоретическая модель воздействия колосников на сорные примеси в очистительных процессах. Изучено условие отражения сора колосниками и вывод его из технологического потока хлопка. Применение колосников плоской формы передней грани обеспечивает устойчивое снижение количества поврежденностей в волокне хлопка-сырца, что повышает качество волокна и приводит к снижению суммы пороков и засоренности. В результате экспериментальных и теоретических исследований получены данные, которые позволяют организовать эффективную работу очистительных машин навесного типа в хлопкоочистительной промышленности. Исследованы движения хлопка-сырца как упруго-вязкого тела при свободном ударе сора зубьями пилы об неподвижную поверхность колосника, рассмотрены силовые схемы между колосниками и пилами. Рассмотрено влияние пильчатого барабана на технологические свойства хлопка-сырца, а именно на поврежденность семян и образование свободного волокна. Рассмотрена модель взаимодействия сорных частиц с колосниками, показаны траектории полета сора в функции наклона колосника и коэффициента восстановления. Исследованы вопросы взаимосвязи физико-механических свойств хлопка-сырца, упругих характеристик хлопка-сырца и силы удара летучки о колосник с плоской рабочей гранью. Решение этих вопросов даст возможность найти оптимальную конструкцию механизмов очистки хлопка-сырца, что приведет к повышению эффекта очистки хлопка-сырца от сорных примесей. На основе выявленных функциональных связей открывается возможность создания новых или совершенствования существующих конструкций пильчато-колосниковой секции очистителей навесного типа. Полученный опыт...
26 September 2018 in Eastern-European Journal of Enterprise Technologies
As a result of experimental studies, a special mathematical model of raw cotton is developed. The effect of density change on the thermal conductivity coefficient is determined. A nonlinear differential equation of heat propagation in coils is obtained. The dependence of the density of raw cotton on the coil height is determined experimentally. The heat flux is intense propagating from denser layers of raw cotton to less dense ones. In a saturated form, the effect of density changes on the propagation of heat is less than in the coils. Pocket spontaneous heating occurs locally with sharp boundaries. An expression is found, which is the general solution of the mathematical model of heat propagation in raw cotton in coils, on the basis of which a number of physical real models can be constructed. The model allows to preliminarily give an estimation of the likely picture of the temperature field in the given microvolumes of raw cotton.