We present a unique bubble generation technique in microfluidic chips using continuous-wave laser-induced heat and demonstrate its application by creating micro-valves and micro-pumps. In this work, efficient generation of thermal bubbles of controllable sizes has been achieved using different geometries of chromium pads immersed in various types of fluid. Effective blocking of microfluidic channels (cross-section 500 × 40 μm²) and direct pumping of fluid at a flow rate of 7.2–28.8 μl h⁻¹ with selectable direction have also been demonstrated. A particular advantage of this technique is that it allows the generation of bubbles at almost any location in the microchannel and thus enables microfluidic control at any point of interest. It can be readily integrated into lab-on-a-chip systems to improve functionality.

Food production in green crops is severely limited by low activity and poor specificity of D-ribulose-1,5-bisphosphate carboxylase/oxygenase (RuBisCO) in natural photosynthesis (NPS). This work presents a scientific solution to overcome this problem by immobilizing RuBisCO into a microfluidic reactor, which demonstrates a continuous production of glucose precursor at 13.8 μmol g⁻¹ RuBisCO min⁻¹ from CO₂ and ribulose-1,5-bisphosphate. Experiments show that the RuBisCO immobilization significantly enhances enzyme stabilities (7.2 folds in storage stability, 6.7 folds in thermal stability), and also improves the reusability (90.4% activity retained after 5 cycles of reuse and 78.5% after 10 cycles). This work mimics the NPS pathway with scalable microreactors for continuous synthesis of glucose precursor using very small amount of RuBisCO. Although still far from industrial production, this work demonstrates artificial synthesis of basic food materials by replicating the light-independent reactions of NPS, which may hold the key to food crisis relief and future space colonization.

Due to the rapid development and superb performance of electronic skin, we propose a highly sensitive and stretchable temperature and strain sensor. Silver nanoparticles coated carbon nanowires (Ag@CNT) nanomaterials with different Ag concentrations were synthesized. After the morphology and components of the nanomaterials were demonstrated, the sensors composed of Polydimethylsiloxane (PDMS) and CNTs or Ag@CNTs were prepared via a simple template method. Then, the electronic properties and piezoresistive effects of the sensors were tested. Characterization results present excellent performance of the sensors for the highest gauge factor (GF) of the linear region between 0–17.3% of the sensor with Ag@CNTs1 was 137.6, the sensor with Ag@CNTs2 under the strain in the range of 0–54.8% exhibiting a perfect linearity and the GF of the sensor with Ag@CNTs2 was 14.9.

A resonant optical tunneling effect (ROTE) is a special phenomenon that bridges the wave optics and the quantum physics, and has attracted continuous research efforts for many years. This paper aims to summarize the latest progress of the ROTE in theoretical modeling and application studies. As the background, the analogies of photon tunneling and electron tunneling are first discussed using different optical structures and their corresponding quantum configurations. Then, two theoretical models are presented based on the optics interpretation and the quantum interpretation, respectively. Next, the applications of the ROTE are explored for optical switches and refractive index sensors. Finally, brief discussions are presented to distinguish the ROTE from some other similar phenomena.

We report a new design of optofluidic tunable lens with a 2D refractive index gradient generated by shining light onto a pair of metal strips.

P-Co₃O₄/n-TiO₂ nanoparticles (~400 nm) for photocatalysis were prepared via carbon assisted method and sol-gel method in this work. The paper also studied the application of visible light illuminated p-Co₃O₄/n-TiO₂ nanocomposites cocatalyst to the overall pure water splitting into H₂ and O₂. In addition, the H₂ evolution rate of the p-Co₃O₄/n-TiO₂ nanocomposites is 25% higher than that of the pure Co₃O₄ nanoparticles. Besides, according to the results of the characterizations, the scheme of visible light photocatalytic water splitting is proposed, the Co₃O₄ of the nanocomposites is excited by visible light, and the photo-generated electrons and holes existing on the conduction band of Co₃O₄ and valence band of TiO₂ have endowed the photocatalytic evolution of H₂ and O₂ with higher efficiency. The optimal evolution rate of H₂ and O₂ is 8.16 μmol/h·g and 4.0 μmol/h·g, respectively.