Given that the conventional back propagation neural network (BPNN) easily falls into the local optimal solutions, resulting in poor prediction accuracy, an improved BPNN based on the differential evolution and grey wolf optimizer (DEGWO) is proposed, the so-called DEGWO-BPNN. The prediction of the water-conducting fracture zone (WCFZ) height is significant for mine safety operations. A total of 104 sample data are trained and 25 sample data are tested to identify the optimal prediction model. Five evaluation indexes are selected to assess the prediction performance of the models quantitatively. Finally, the DEGWO-BPNN model is applied to a specific engineering case. The main conclusions are as follows: (1) Mining height, mining depth, coal seam dip, panel width, and ratio of hard rock as the main factors affecting the WCFZ height are selected. The topology structure of the model is defined as ‘5-12-1’; (2) the bias between the predicted value and the actual value of the training samples is smaller with an average error of 2.39. Test samples further validate the prediction precision through evaluation indexes. The values of MAE, RMSE, MAPE, and R2 are 2.3952, 3.4674, 5.3148%, and 0.99077, respectively. The prediction accuracy is 94.6852%; (3) ‘Mining Code’, MLR, BPNN, and GWO-BPNN models are treated as the comparison groups. The comparative analysis shows that the prediction performance of ‘Mining Code’ is the worst, while that of DEGWO-BPNN is the best, and it outperforms other algorithms and statistical approaches; (4) the prediction of WCFZ height in the 11601 panel is in line with the actual value. The prediction error of the DEGWO-BPNN model is lower than that of the comparison models. As such, the DEGWO-BPNN model can be well applied to the prediction of WCFZ height and is suitable for coal mines with different regional geological conditions. It can provide a valuable reference for mine safety operations.
This study presents a case of weakly consolidated strata developed in Dananhu No.7 coal mine. Using a combination of numerical simulation, field measurement comparison, and the critical hydraulic gradient criterion, we investigate the overburden failure and the risk possibility of water–sand mixture inrush during excavation. The following are the principal findings: (1) Weakly consolidated rocks have poor physical characteristics, particularly when they are mudded and disintegrated after encountering water, which may become a favorable source of water–sand inrush; (2) The water-conducting zone develops to a height of 160.5 m with a crack-mining ratio of 15.29 times, extending upward to Toutunhe Formation aquifer. The predictions are consistent with measurements in adjacent mines with similar geological conditions; (3) Cracks without larger subsidence are developed at the front edge of the mining direction, and some parallel stepped cracks behind the goaf could be easily observed. Ground subsidence along the goaf center finally displays a symmetrically wide-gentle U shape; (4) The critical hydraulic gradient of Toutunhe Formation aquifer, aquifer above 3# coal seam, and aquifer of 3#–7# coal seam in Xishanyao Formation is 1.314, 1.351, and 1.380, the actual value is 0.692, 2.089, and 7.418 accordingly. It is inferred water–sand mixture outburst will not occur in Toutunhe Formation aquifer, while the potential risk exists in the aquifers of Xishanyao Formation. Through drainage and depressurization projects, a water–sand mixture outburst accident does not occur during excavation. This study reveals the overburden failure characteristics and the initiation mechanism of water–sand inrush in weakly cemented strata, as well as the internal relationship between them, which provides new research ideas for safe operation in other mining areas with similar geological conditions. The research work has certain practical guiding significance.
Underground mining safety risk increases with the more complicated geological conditions in deep strata, so coal mines turn to the upper limit mining of shallow coal seams under the Cenozoic strata. Nevertheless, coal mines in the Northern China coalfield are mainly covered by thicker loose sandy layers with more abundant water. The analysis of overburdened strata deformation properties is essential for safe, efficient, and environmentally friendly production. This paper discusses the deformation and migration of overburdened strata through mechanical analysis, numerical and physical similar simulations, and in situ field measurement. A thorough understanding of overburdened strata deformation induced by mining has been obtained, and the results are as follows: The immediate roof first collapses to form the caved zone accompanied by the first weighting, and the fractured zone and bending deformation zone begin to develop in sequence; the separation layer is observed during the period of fracture development. However, the occurrence of the bending deformation subsidence results in the closure of the separation space; the ratio of fractured and mining height is quantified to 14.4:1.0 by the comparative analysis. The results may serve as technical evidence to support the mining safety of the study area and other coal mines with similar geological conditions.
Considering groundwater from the aquifers overlying the bedrock is an important water source for drinking purposes. As such, the investigation of its property is essential. Based on the spatial structure of aquifers in the study area, the aquifers in the Cenozoic strata are divided into three groups. The multivariate statistical approaches are employed to identify the hydrogeochemical processes and hydro-chemical types, and hydrogeochemical inverse modeling is applied to further validate and elucidate the hydrogeochemical process and water–rock interaction. The results are as follows: (1) The hydro-chemical type of the upper aquifer is dominated by the K + Na-HCO3 type, while others have similar water quality types, which are dominated by the K + Na-Cl type and the K + Na-SO4 type. (2) The saturation index of anhydrite, gypsum, halite, and CO2(g) is below zero in three aquifers, indicating that they are unsaturated. While aragonite, calcite, and dolomite in the middle aquifer remain in the unsaturated–saturated state. (3) The cation exchange process accelerating the reduction of Ca2+ concentration and the increase of SO42− concentration occurs in three aquifers, and the dissolution of calcite and dolomite minerals occurs in most cases. This study supports the fundamental evidence for the hydrogeochemical processes and water resource utilization and has a certain practical significance.