The use of robots for machining operations has become very popular in the last few decades. However, the challenge of the robotic-based machining process, such as surface finishing on curved surfaces, still persists. Prior studies (non-contact- and contact-based) have their own limitations, such as fixture error and surface friction. To cope with these challenges, this study proposes an advanced technique for path correction and normal trajectory generation while tracking a curved workpiece’s surface. Initially, a key-point selection approach is used to estimate a reference workpiece’s coordinates using a depth measuring tool. This approach overcomes the fixture errors and enables the robot to track the desired path, i.e., where the surface normal trajectory is needed. Subsequently, this study employs an attached RGB-D camera on the end-effector of the robot for determining the depth and angle between the robot and the contact surface, which nullifies surface friction issues. The point cloud information of the contact surface is employed by the pose correction algorithm to guarantee the robot’s perpendicularity and constant contact with the surface. The efficiency of the proposed technique is analyzed by carrying out several experimental trials using a 6 DOF robot manipulator. The results reveal a better normal trajectory generation than previous state-of-the-art research, with an average angle and depth error of 1.8 degrees and 0.4 mm.
1
18 September 2025 in Journal of Technical Education Science
This work examines the effectiveness of a digital twin (DT) framework using an industrial pick-and-place case study with a collaborative robotics arm. The problem addressed is the need for improved production process planning and visualization in robotics. The employed method involves creating a DT and evaluating its fidelity to a physical robotic system performing a pick-and-place task. Evaluations included comparing the digital and real robot trajectories, utilizing ISO 9283 performance testing, and analyzing metrics like RMSE, MAPE, and R2. The evaluation shows initial positive results indicating that the proposed DT framework fits the real data well, thus, demonstrates feasibility of this approach. The results can be used to improve the planning and visualization of the production process for collaborative robot arm with 3D printers or adapted for more complex industrial machine tools. These improvements can support the enterprises to spot potential problems before they occur, optimize performance and reduce costs.
An automated robotic system has been proposed to replace manual labor in staking support stakes along orchid stems. This operation ensures structural stability, maintains flower quality, and prevents damage to the stem during plastic cover packaging and transportation in industrial orchid production lines. However, precise placement of the wooden stake is challenging due to its natural curved geometry, which can cause damage to leaves and pots. Furthermore, stake springback induced by stem clipping can lead to misalignment from the desired upright position if not compensated for. To address the aforementioned challenges, this paper proposes a reference point-based tip error extraction method for measuring wooden stake skewness along the x-, y-, and z-axes using image processing. Furthermore, a machine learning model estimates stake springback based on orchid stem phenotypic traits and stem-staking mechanics-inspired features. For skewness measurement, this method achieves MAEs of 0.09 mm, 0.156 mm, and 0.136 mm along the x-, y-, and z-axes, with corresponding RMSEs of 0.114 mm, 0.173 mm, and 0.152 mm, respectively. For springback estimation, the Extra-Trees regressor achieved an R2 of 0.926 and an MAE of 0.51[[EQUATION]]. The proposed wooden stake skewness and springback compensation algorithms were then validated through extensive trials using a 6-DoF industrial robot. The research findings showcase the potential of the proposed approach for autonomous robotic staking compensation in large-scale floriculture production.