Germanium–tin nanoparticles are promising materials for near- and mid-infrared photonics thanks to their tunable optical properties and compatibility with silicon technology. This work proposes modifying the spark discharge method to produce Ge/Sn aerosol nanoparticles during the simultaneous erosion of germanium and tin electrodes. Since tin and germanium have a significant difference in the potential for electrical erosion, an electrical circuit damped for one period was developed to ensure the synthesis of Ge/Sn nanoparticles consisting of independent germanium and tin crystals of different sizes, with the ratio of the atomic fraction of tin to germanium varying from 0.08 ± 0.03 to 0.24 ± 0.07. We investigated the elemental and phase composition, size, morphology, and Raman and absorbance spectra of the nanoparticles synthesized under different inter-electrode gap voltages and the presence of additional thermal treatment directly in a gas flow at 750 °C. The research shows that the in-flow thermal treatment of aerosol-agglomerated nanoparticles produced special individual bicrystalline Janus Ge/Sn nanoparticles with an average size of 27 nm and a decreasing absorption function with a changing slope at 700 nm.

Aluminum nanoparticles attract scientific interest as a promising low-cost material with strong plasmon resonance in the ultraviolet region, which can be used in various fields of photonics. In this paper, for the first time, ultraviolet luminescence of zinc oxide nanoparticles in colloid solutions and nanostructure films in the presence of plasmonic aluminum nanoparticles 60 nm in size with a metal core and an aluminum oxide shell were studied. Mixture colloids of ZnO and Al nanoparticles in isopropyl alcohol solution with concentrations from 0.022 to 0.44 g/L and 0.057 to 0.00285 g/L, correspondingly, were investigated. The enhancement of up to 300% of ZnO emission at 377 nm in colloids mixtures with metal nanoparticles due to formation of Al-ZnO complex agglomerates was achieved. Plasmon nanostructures with different configurations of layers, such as Al on the surface of ZnO, ZnO on Al, sandwich-like structure and samples prepared from a colloidal mixture of ZnO and Al nanoparticles, were fabricated by microplotter printing. We demonstrated that photoluminescence can be boosted 2.4-fold in nanostructures prepared from a colloidal mixture of ZnO and Al nanoparticles, whereas the sandwich-like structure gave only 1.1 times the amplification of luminescence. Calculated theoretical models of photoluminescence enhancement of ideal and weak emitters near aluminum nanoparticles of different sizes showed comparable results with the obtained experimental data.

In this paper, we demonstrate an ability to produce aerosol metal Al nanoparticles with plasmon resonance in the ultraviolet region in a spark discharge generator in pure argon atmosphere. The sizes of the obtained primary particles with metal Al core and natural oxide shell in the range from 4 to 50 nm, which were collected in agglomerates with mean size from 190 to 260 nm, were observed. Simulation extinction spectra according to Mi theory for obtained particle ensembles were calculated. It was experimentally and theoretically found that obtained nanoparticles ensembles demonstrate the broad extinction peaks with maximum below 250 nm depending on the synthesis conditions.

This work demonstrates synthesis of metal Au nanoparticles with a plasmon resonance in the visible optical region by the spark discharge method in atmosphere of argon of purity 6.0. With raising of sintering temperature from 25 to 950 °C, the morphology of synthesized Au nanoparticles changed from agglomerates to individual particles with decreasing the median size from 270 to 90 nm according to aerosol spectrometer. While by transmission electron microscopy primary nanoparticles with a gold crystalline structure with sizes in range from 5 to 120 nm were observed. Synthesized nanoparticles ensembles had broad absorption peaks with maximum in the visible optical region with peak positions approximately at 490 nm. High temperature sintered particles had a spherical shape and an additional absorption peak at approximately 640 nm.