Gallium (Ga), indium (In), and germanium (Ge) play an important role in the modern high-tech material field. Due to their low content and scattered distribution in the crust, and the increasing demand for these metals in recent years, their supply risks have sharply increased. Therefore, the recycling of these metals is of great significance. In this work, a systematic review was performed using the Web of Science, Scopus, MDPI, Elsevier, and Springer Link databases. The combined terms used for the search were Ga/In/Ge, extraction, separation, and recycling. After a careful evaluation of the titles, abstracts, and full texts, a total of 106 articles were included. This paper briefly describes the resource features of Ga, In, and Ge. After that, the chemical principles, technical parameters, and metal recovery in various extraction and separation methods from monometallic and polymetallic resources are systematically reviewed. Leaching followed by solvent extraction or ion exchange is the main process for Ga, In, and Ge recovery. Although many attempts have been made to separate multiple metals from leaching solutions, highly selective solvents and resins are still the research priority. This review can provide theoretical and technical guidance for the separation of Ga, In, and Ge from various resources.

Due to the advancement of industrialization and the development of the metal smelting industry, cadmium (Cd), as a highly toxic heavy metal element, is discharged into the natural environment in the form of dust, slag, and waste solutions during the Cu-Pb-Zn smelting process, causing great harm to the soil, water environment, and human health. Meanwhile, Cd is a key component of Ni-Cd batteries and CdTe semiconductor materials. The removal and recovery of Cd from the Cu-Pb-Zn smelting process faces a dual concern with respect to resource recycling and environmental protection. This paper briefly introduces the Cd-containing secondary resources produced in the Cu-Pb-Zn smelting process, systematically reviews the recovery methods of Cd from dust, slag and waste solutions, and compares the technical principles, process parameters, separation efficiency, advantages and disadvantages, and application requirements. In addition, a new route to treat Cd-containing solutions via the foam extraction method was proposed, which has the advantages of a short reaction time, large handling capacity, high removal efficiency, and simple operation equipment, showing superior application prospects, especially for industrial bulk waste solutions with ultralow concentrations.

The mining of molybdenum and uranium ores inevitably results in the generation of large volumes of wastewater containing low concentrations of metals, which poses significant threats to the environment. This study presents a novel precipitation–flotation process for the simultaneous separation of molybdenum and uranium from wastewater. A systematic investigation was conducted on the impacts of the type of precipitant, flotation reagent type, and flotation parameters on the experimental results. Ferric salt served better as a precipitant than aluminum salt and humic acid did, and sodium dodecyl sulfate (SDS) was more suitable than sodium dodecyl benzene sulfonate for acting as a surfactant and foaming agent. Under specific conditions, including a pH of 6.6, an Fe³⁺ dosage of 0.6 mmol·L⁻¹, an SDS dosage of 40 mg·L⁻¹, an air flow rate of 25 mL·min⁻¹, and a flotation time of 10 min, the removal efficiencies of molybdenum and uranium reached 96.6% and 93.6%, respectively. After flotation, the molybdenum concentration, uranium concentration, chemical oxygen demand, and turbidity of the treated water all meet the emission standards. Furthermore, the metal removal mechanisms, including the particle size distribution, functional group structure, surface element composition, microstructure, and element distribution, were elucidated on the basis of characterization of the precipitation–flotation products.