The slope reinforcement scheme has an important influence on the prevention and control of landslides. A reasonable reinforcement scheme can improve the reliability, economy and efficiency of landslide resistance. It is urgent to establish a local precise reinforcement method for landslides on the basis of clear process and the instability modes of landslides. Taking a high-steep anti-dip rock slope as an example, six numerical models are established by using the continuum–discontinuum element method (CDEM) to carry out seismic damage and dynamic analysis of slopes. By comparing the seismic response and damage characteristics of being unstrengthened, local precise reinforcement and overall reinforcement models, the applicability of the proposed local precise reinforcement method for the slopes is discussed. The results show that the determination of the dynamic amplifying effect and seismic damage characteristics of slopes is the primary prerequisite of the local precise reinforcement method. The dynamic amplification effect of the slope toe, crest and shallow slope surface are much larger, that is, they are the potential reinforcement areas. The local precision reinforcement times should be controlled within a certain number of times, and the slope after the first three times of the local reinforcement effect is the best. However, more than three times after the reinforcement effect it becomes worse. Moreover, the dynamic amplification effect, the equivalent crack ratio and the mechanical energy of the slope after three times of local precision reinforcement are similar to the overall reinforcement effect, which indicates that local precision reinforcement has good feasibility. This work can provide references for landslide disasters prevention and control.
The adverse geological conditions of soil cave, karst cave and goaf in deep foundation directly affect the safety and economy of geotechnical engineering construction. It is a difficult problem in geotechnical engineering detection to detect the distribution of bad geological conditions efficiently and accurately. Aiming at the problems of short penetrating distance and low resolution of cross-hole acoustic wave detection in rock-soil mass, based on the characteristics of acoustic wave propagation in rock and soil layers and comprehensively utilizing the spark source and data acquisition device, a long-distance cross-hole acoustic wave detection technology is proposed. According to the indoor concrete model test and field tests of geotechnical engineering, the applicability of the long-distance cross-hole acoustic wave detection technology in the detection of geotechnical structure and adverse geological phenomena under complex geological conditions is verified. The results show that acoustic wave CT imaging can accurately detect the cavities in the indoor concrete model test. In addition, the field tests of the grouting effect of tunnel-surrounding rock, high-rise building foundation and subgrade further verify the rapidity, accuracy and intuitiveness of the long-distance cross-hole acoustic wave detection technology. This work provides a reference for eliminating the potential safety problems caused by adverse geological conditions and similar geotechnical engineering investigation.