Polyvinyl alcohol (PVA) is a polymeric material with good biocompatibility, excellent hydrophilicity, and a large number of hydroxyl groups. However, due to its insufficient mechanical properties and poor inhibition of bacteria, it has a lack of applications in wound dressings, stent materials, and other fields. In this study, a simple method was used to prepare composite gel materials: Ag@MXene-HACC-PVA hydrogels with a double-network structure were prepared using an acetal reaction. Due to the double cross-linked interaction, the hydrogel has good mechanical properties and is resistant to swelling. The adhesion and bacterial inhibition were enhanced due to the addition of HACC. In addition, the strain sensing properties of this conductive hydrogel were stable, and the GF (specification factor) was 1.7617 at 40–90% strain. Therefore, the dual-network hydrogel with excellent sensing properties, adhesion properties, antibacterial properties, and cytocompatibility has potential applications in biomedical materials, especially as a tissue engineering repair material.

Poly L-lactic acid (PLLA) is a non-toxic, biocompatible degradable polymer material with excellent mechanical properties after moulding. However, it faces challenges in the use of biomedical materials because of its intolerance to bacteria. Here, we use an easy-to-operate method to prepare a composite multilayer membrane: PLLA membrane was used as substrates to assemble positively charged chitosan and negatively charged Ag@MXene on the surface using the layer-by-layer (LBL) method. The assembly process was detected by fluorescein isothiocyanate-labelled chitosan and the thickness of the coating multilayer was also detected as 210.0 ± 12.1 nm for P-M membrane and 460.5 ± 26.5 nm for P-Ag@M membrane. The surface self-assembled multilayers exhibited 91.27% and 96.11% growth inhibition ratio against Escherichia coli and Staphylococcus aureus strains under 808 nm near-infrared laser radiation with a synergistic photothermal antibacterial effect. Furthermore, best biocompatibility of P-M and P-Ag@M membranes compare to PLLA membrane motivated us to further explore its application in biomedical materials.

A novel recombinant human-like collagen/fibroin scaffold has been prepared previously, which has high porosity, controllable pore size, and much better mechanical properties than the reported fibroin-based scaffold. In this research, the cell responses of vascular smooth muscle cells to this blend scaffold were examined in vitro. Cell morphology, adherence, and growth in scaffolds were observed by scanning electron microscopy, laser scanning confocal microscopy after staining of the cells with propidium iodide at 1, 3, 5, and 7 days, respectively. A wide range of measurements, including 3-[4,5–dimethylthiazol-2-yl]-2, 5-diphenyl tetrasodium bromide assay, and total intracellular protein content at the end of 7 days culture, were conducted. An increase of viability and protein content of vascular smooth muscle cells cultured in recombinant human-like collagen/fibroin scaffold was found. The laser scanning confocal microscopy and scanning electron microscopy results confirm that the cells readily adhered and proliferation in the blend than in fibroin scaffold, and indicate a better adhesion process. The positive effects were especially significant for vascular smooth muscle cells. The recombinant human-like collagen/fibroin scaffold could be a promising biomaterial for vascular tissue engineering.

In recent years, the incidence of bone defects has been increasing year by year. Bone transplantation has become the most needed surgery after a blood transfusion and shows a rising trend. Three-dimensional-printed implants can be arbitrarily shaped according to the defects of tissues and organs to achieve perfect morphological repair, opening a new way for non-traumatic repair and functional reconstruction. In this paper, strontium-doped mineralized collagen was first prepared by an in vitro biomimetic mineralization method and then polylactic acid was homogeneously blended with the mineralized collagen to produce a comprehensive bone repair scaffold by a gas extrusion 3D printing method. Characterization through scanning electron microscopy, X-ray diffraction, and mechanical testing revealed that the strontium-functionalized composite scaffold exhibits an inorganic composition and nanostructure akin to those of human bone tissue. The scaffold possesses uniformly distributed and interconnected pores, with a compressive strength reaching 21.04 MPa. The strontium doping in the mineralized collagen improved the biocompatibility of the scaffold and inhibited the differentiation of osteoclasts to promote bone regeneration. This innovative composite scaffold holds significant promise in the field of bone tissue engineering, providing a forward-thinking solution for prospective bone injury repair.