Many fresh water bodies face a great challenge of an invasive weed called water hyacinth (WH) which has great impacts on the environment, ecology, and society. Food and Agriculture Organization (FAO) estimates that over nine million tons of Fish wastes (FW) are thrown away each year. The fish waste generated poses environmental and health hazards because in most cases it is either disposed into pits or discarded onto the open grounds. Both WH and FW are potential substrates for biogas production. However, utilization of FW substrate alone has a limitation of producing a lot of amounts of volatile fatty acids (VFAs) and ammonia. Their accumulation in the digester inhibits substrate digestion. Consequently, as stand-alone it is not suitable for anaerobic digestion (AD). This can be overcome by co-digestion with a substrate like WH which has high carbon to nitrogen (C/N) ratio prior to biodigestion. Experimental variable levels for biogas were substrate ratio (WH:FW, 25–75 g), inoculum concentration (IC, 5–15 g/250 mL), and dilution (85–95 mL). Design-Expert 13 was used for optimization and results analysis. Response surface methodology (RSM) was used to examine the effects of operating parameters and identify optimum values for biogas yield. Optimum values for maximum biogas with the highest methane yield of 68% were found to be WH:FW ratio, 25:75 g, 15 g of IC, and 95 mL for dilution. The yield was 16% and 32% greater than FW and WH mono-digestion, respectively. The biogas yield was expressed as a function of operating variables using a quadratic equation. The model was significant (P < 0.05). All factors had significant linear and quadratic effects on biogas while only the interaction effects of the two factors were significant. The coefficient of determination (R2) of 99.9% confirmed the good fit of the model with experimental variables.
26 January 2023 in International Journal of Low-Carbon Technologies
Fish waste (FW) is biodegradable waste that remains underutilized and causes a problem to the environment since the existing disposal techniques result in health risks and environmental pollution. FW has significant potential for producing biogas that decreases the reliance on fossil fuels because it contains easily biodegradable organic matter. The physicochemical analysis of the FW such as moisture content of 61.78%, volatile solids (VS) of 93.94%, total solids of 38.21%, ash content (AC) of 0.52%, total organic carbon of 54.2%, total Kjeldahl nitrogen of 9.2% and carbon to nitrogen (C/N) ratio of 5.89% were considered and analyzed in this research. In addition, the methane potential was determined and obtained using gas detector. The results shown that the methane (CH4) content in FW was 50.12%, which was the potential feedstock of FW for biogas production. Nevertheless, the VS of FW was high, which was good for this feedstock to be easily digested as the sign of producing biogas and demonstrates 99.9985% of performance rate. Finally, the FW had a lower C/N ratio compared with other biogas production waste. Future work needs to consider co-digestion with higher C/N ratio feedstocks.
The Arusha Urban Water Supply and Sanitation Authority (AUWSA) is a public utility responsible for ensuring the reliable delivery of clean water to the people of Arusha, Tanzania. However, issues with water bill payments have emerged, which have impacted the AUWSA’s operations and ability to provide a sustainable and affordable water supply service. Late payment of water bills and revenue loss due to the outdated postpayment water metering technology are the major challenges faced by the AUWSA. To address these issues, a study has designed and developed an intelligent GSM-based smart prepaid water meter with improved prepayment methods. The prepaid water meter includes a custom user interface, water flow sensor, automatic token generator, and Unstructured Supplementary Service Data (USSD) application. Customers can easily register; load their water credits using Airtel Money, TigoPesa, or Mpesa; and check their usage. An LCD displays water usage information, and customers receive short message service (SMS) notifications via GSM technology when their tokens are about to expire or have been successfully loaded. Water flows, and the valve stops when credits are exhausted. The system’s administrator (admin) communicates with the meter remotely via a web interface developed using PHP, HTML, JavaScript, and SQL. This interface enables the AUWSA to monitor and manage the meter, which should help reduce revenue losses and improve overall efficiency. Future research should focus on predicting water leakage and cybersecurity using artificial intelligence (AI)/machine learning (ML) technologies.
RAHA Beverages Company (RABEC) is one of the banana wine production companies that utilizes fuel in steam production in Arusha-Tanzania, where fuel data conditions such as temperature, pressure, discharge, fuel level, and gas leakage with humidity were a challenge to monitor, which provoked boiler malfunction and plant breakdown. Today, RABEC manually uses a dropping stick into the fuel tank to monitor fuel data conditions which is time-consuming and gives inaccurate readings, inefficiency, fuel economy discrepancy, and accidents. This study aimed to design and develop an IoT-based fuel monitoring system. The flow meter, ultrasonic level, thermistor fuel temperature, humidity, and pressure sensors were used to gather fuel information where the GSM module was employed to send fuel data messages to the operator’s phone. An AT mega 328 microcontroller was used to process and analyse the fuel data and send them to the Thing Speak IoT platform using Wi-Fi connectivity. The results showed that when the fuel level was less than the threshold value, an operator was alerted by a refilling message via GSM technology. A pressure of 0.1psi, a fuel temperature of 120 ℃, and 80% of humidity, the system notifies the operator by an alert message to check the injector pressure and if the fuel–air mixture is perfect. In addition, these data were observed on the LCD and ThingSpeak webpage. To conclude, the developed system proved the best performance with a 99.98% of success rate with high accuracy, security, and efficiency rate compared to the current monitoring system.
In this paper, an advanced patch antenna was designed and developed for wideband application. It has a resonance frequency of 4.8 GHz and has been designed using a FR4_epoxy substrate with a dielectric constant $\varepsilon$ of 4.4 and height of 1.6 mm. C band frequencies were analyzed from 4 GHz to 8 GHz which are commonly used in satellite television and communication satellites, hence the width and length of the patch are 19.02 mm and 14.37 mm respectively with input impedance of $243 \Omega$. The proposed antenna is useful in a number of applications notably satellite television broadcasting due to its effective resistance to signal degradation caused by rain. In the proposed antenna, the theoretical calculation set 4.8 GHz as the resonant frequency, and meticulous calculations were done to ascertain patch physical parameters of the patch, simulation results prove that the designed antenna encapsulates $C$ band frequency as the simulation results show resonant frequency at 4.5 GHz hence a 10 % discrepancy between simulated and calculated results. The return loss achieved after several finetuning was at −0.61 dB.
Rwanda's power system security is the most important in optimization of grid frequency to prevent power blackouts caused by load disturbances and power imbalances. To manually stabilize and restore network frequency, a tuned PID (Proportional, Integral, and Derivative) controller was used, but it was inefficient and unreliable. The objective of this article is to develop a system that can be used to balance generation—demand powers during power outages by alleviating grid frequency in load disturbance cascaded events. By balancing power generation and demand, the balanced steady-state approach was proposed and developed to restore and optimize grid frequency to its normal state. This technique used PID-Power System Automatic Stabilization (PID-PSAS) technique based on load frequency control. The load disturbances of ± 20%, ± 10%, and ± 5% of a 250 MW power load were considered. MATLAB/Simulink was utilized to model and simulate the Rwanda power and controller systems. The results showed that the frequency responses of single and two area western and northern grids were reduced to $${13*10}^{-5}$$ Hz, $${15*10}^{-6}$$ Hz, and 0.251 s for overshoot, steady-state error, and settling time respectively. The proposed control system performance of 99.86% success rate was achieved and compared with the current control techniques of 70.6% performance rate. A stable frequency was observed at any disturbances and more than 300 megawatt losses were mitigated. Finally, the developed control technique rapidly stabilize the frequency and balance the generation-demand powers after 0.251 s. Future works have to focus on 0 Hz of steady state errors using cyber-physical power optimization systems. Article Highlights: The steadiness of connected loads and power utility supply Reduction of frequency instability and stead-state values Prevention and mitigation of power blackouts and power interruptions