The vibrational properties and mechanism of a foam-filling short basalt fiber reinforced epoxy resin composite beetle elytron plate (EBEPfc) were studied by experiments and the finite element (FE) method in this paper. The experimental results showed that the natural frequencies of the first two modes of the EBEPfc were very close to those of a foam-filling short basalt fiber reinforced epoxy resin composite honeycomb plate (HPfc), while the vibrational response of the EBEPfc was weaker than that of the HPfc, and the damping ratio was improved; the improvement of the second mode was significant. Therefore, the EBEPfc had a better vibration reduction performance and could directly replace the HPfc in engineering applications. The FE results showed that foam filling enhanced the shear stiffness of the whole core structure, and had a more obvious effect on the shear stiffness of the HPfc. Meanwhile, it particularly reduced the shear force proportions and contributed to the protection of the skin and core skeleton. The mechanisms of the vibrational characteristics of these two types of sandwich plates were explored from the perspective of the equivalent cross-sectional area, shear stiffness, shear strain energy per unit volume and friction. These results provide a valuable reference for the promotion and application of EBEPfc in the fields of vibration reduction and seismic resistance.
This study proposes a type of bioinspired box-girder bridge with a trabecular-honeycomb steel web (THSW) inspired by beetle elytra (hardened forewings), and the buckling and shear properties of the THSW are investigated via the finite-element method under transverse loading. The results are as follows: (1) When η (the ratio of the trabecular radius to the distance between the center points of two trabeculae) is larger than 0.2, the buckling stability of the THSW is significantly better than that of a conventional corrugated steel web (CSW); however, considering the buckling mode, the achieved increases in the properties, and economic factors, the parameter η is recommended to be 0.2 or 0.25. (2) The stress level in the trabeculae is approximately only half of that in the CSW, but the THSW still bears most of the shear force, which is similar to a CSW bridge. (3) Under a shear load, the THSW is dominated by an S-type shear deformation. Importantly, the corresponding synergistic shear mechanism makes the trabecula and honeycomb wall yield in an obvious sequential order, leading to a significant improvement in the ductility of the structure. These results provide a foundation for further research and applications of this new bioinspired bridge and a solution for improving the buckling and shear performance of conventional CSWs.