Aumaparn PHLAYRAHAN

Dr. Aumaparn PHLAYRAHAN

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Pimthong ThongnopkunPimthong Thongnopkun
Pimthong Thongnopkun
APAumaparn PHLAYRAHAN
Aumaparn PHLAYRAHAN
DMDawan Madlee
Dawan Madlee
WRWorachai Roubroumlert
Worachai Roubroumlert
MJMatinee Jamkratoke
Matinee Jamkratoke
Copper nanoparticles are being applied in the biosensors, engineering, electronic devices, and technology fields. A key advantage of nanomaterials is that their properties differ from their bulk with the same composition. However, the application of nano-copper particles for jewelry and artwork has not yet been revealed. We discovered and compared the application of nano-sized copper particles in jewelry fabrication with micro-copper particles. The nano- and micro-sized copper particles were synthesized and mixed with the same organic binders and water content to produce an alternative clay-like material for creating handmade jewelry and artwork. The article addresses the effects of thermal treatment on thermal behavior and the development of physical properties of differently sized copper particles. Their physical properties depend strongly on the size of the starting copper particles and heating conditions. We investigated the influence of thermal treatment, heating rate, firing temperature, and holding time to optimize the firing conditions for jewelry fabrication and wearing.

1 December 2021 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
APAumaparn PHLAYRAHAN
Aumaparn PHLAYRAHAN
HHH Homkhajorn
H Homkhajorn
FT-IR spectroscopy is a significant method to detect the heat treatment of gemstones, especially ruby and sapphire. There are a set of certain peaks, i.e., 3309, 3232, and 3185 cm−1 in the FT-IR spectra used as an indicator to determine whether the samples have been undergone heat treatment. In this study, however, new evidence has emerged. The O-Al-O bending vibration peak at the fingerprint region around 600-700 cm−1 has been suggested as new clues to define the heated stones. The blue sapphire samples were prepared, then the heat treatment was performed separately at 800, 1000, 1200, 1400, and 1650 °C under an oxidizing atmosphere with a soaking time of 1 hour. The energy dispersive X-ray fluorescence (EDXRF) shows that there is no significant difference in the chemical composition of Al2O3, Fe2O3, TiO2, and Ga2O3 between unheated and heated samples. The alteration of blue color and the UV-Vis absorption spectra are also difficult to classify. When comparing the samples at each heating temperature, the alteration of blue color was not related to one another because the color of the samples was decreased depending on those of the unheated ones. The FT-IR spectra revealed that the broad absorption peak of O-Al-O bending at approximately 650 cm−1 was slightly shifted to a lower wavenumber (630 – 635 cm−1) after the samples were heated at higher temperatures. The broad absorption peak also turned into a sharper one when the sample has undergone heating at ≥1000 °C. It is suggested that the peak is related to the rearrangement of the Al2O3 structure of the blue sapphire sample after heat treatment.

30 September 2024 in Chiang Mai Journal of Science
Verified
Journal Article
Closed access
APAumaparn PHLAYRAHAN
Aumaparn PHLAYRAHAN
SBSirintra Boonchu
Sirintra Boonchu
P urchasing pearls from online platforms and e-marketplaces has been around for years, where buyers could join in the thrill of the show of opening pearls from oysters or mollusks. In exchange for those materials that claim to be pearls, buyers must pay a high price per piece. In this study, the spectroscopic properties of twenty-seven samples purchased from online platforms and e-marketplaces were revealed. The FTIR spectra show the characteristic peaks of aragonite at 1483, 716, 712, and 699 cm-1, while exhibiting the vaterite peaks at 882 and 879 cm-1. Correspondingly, Raman spectra indicate the ν1 symmetrical and ν4 in-plane bending modes of the carbonate at 1083, 701, and 704 cm-1. Thus, it clarified that all the samples are pearls. The SrO/MnO ratio acquired by energy dispersive X-ray spectroscopy (EDXRF) at an average of 0.44 suggested that the samples are freshwater pearls. Apart from the white pearl, the cause of the color of the sample is separated into two factors. The natural color, which is presented in cream and peach, is caused by polyene pigments. In contrast, vivid colors such as blue, violet, purple, and pink are shown as evidence of dyes. The UV-Vis reflectance spectra also present a different absorption between natural and dyed pearls.

4 September 2026 in Crystals
Verified
Journal Article
Open access
PDF file
APAumaparn PHLAYRAHAN
Aumaparn PHLAYRAHAN
NBNantharat Bunnag
Nantharat Bunnag
This study investigated the effects of progressive step-heating (300–500 °C) and direct heating (500 °C) on pinkish-orange and red tourmalines using colorimetric, spectroscopic, and chemical analyses. Heating progressively modified visible absorption and color, with treatment at 500 °C generally increasing lightness (L*) and substantially decreasing chroma (C*), accompanied by weakening of the broad absorption near 520 nm while strong pleochroism was retained. Chemical analyses revealed substantial compositional variability, particularly in Mn and Fe, although elemental abundance alone did not account for the observed optical responses. Color evolution was associated with changes in overlapping electronic absorption features, but the underlying microscopic processes could not be uniquely assigned to specific transition-metal ions or oxidation-state changes. Fourier transform infrared (FTIR) spectroscopy showed preservation of the principal framework-related vibrational features up to 500 °C, with no evidence of major structural disruption. Within the present step-heating series, 400 °C produced an intermediate outcome characterized by measurable lightening and desaturation while retaining more of the original pink-to-red chromatic component than after treatment at 500 °C, which produced substantially greater desaturation.