Geochemically driven alterations of fractures in multi‐mineral media can create altered layers (ALs) at the fracture‐matrix interface. Spatial variations in the AL significantly influence mass transfer across the interface, and the hydraulic and mechanical properties of the fractured medium. A real‐rock based microfluidic experiment reported spatial variations in AL thickness despite the initially smooth fracture surface, suggesting potential effects of matrix heterogeneity on AL development. However, the respective contribution of structural and mineralogical characteristics is still poorly understood. Using the microfluidic experimental data and a micro‐continuum reactive transport model, we systematically evaluated how micro‐porosity and initial mineral texture impact AL development and thus the overall reactive transport behaviors. Our simulation results confirmed that the extent of AL spatial variations, mainly controlled by mineralogical texture, influences the evolution of reaction and permeability in different ways. Accounting for spatial heterogeneity in mineral distribution produces “channeling” structures in ALs and lower overall reaction (by up to 35.6%), but larger permeability increase (by up to 9.8%). The characteristic length of the reactive mineral cluster was observed to dominate the internal texture of ALs. Whereas the presence of micro‐porosity can enhance mineral accessibility via improving connectivity for flow and transport, and lead to both higher bulk reaction, that is, thicker ALs, and permeability enhancement. Considerations of surface roughness with characteristic length on the same order of magnitude as mineral texture did not change the overall development of AL, which further highlights the importance of accounting for rock matrix properties in predicting long‐term evolution of fractured media. The resulting spatial variations of ALs and their impacts on bulk properties, however, are expected to be further complicated by the coupling of chemical and mechanical processes, and may trigger matrix disaggregation, erosion and other mechanisms of fractured media alteration.
Pore structure features govern the capacity of gas storage and migration in shales and are highly dependent on the types of pores, i.e., interparticle (InterP) pores, intraparticle (IntraP) pores and organic matter (OM)-hosted pores. However, fractal features in terms of pore types and their respective contributions to permeability have been rarely addressed. On the basis of high-resolution imaging, fractal dimensions (Ds) have been determined from both pore size distributions and digital rock to quantify the heterogeneity in pore morphology and spatial textures. Overall, OM-hosted pores are smaller in size and more abundant in quantity, corresponding to a relatively high D, while IntraP pores are mainly isolated and scarce, translating into lower D values. Additionally, crack-like InterP pores with a moderate level of porosity and the D can play a pivotal role in shale seepage potential. A comparison of the estimated permeability among different pore types highlights that the contribution of interconnected OM pores to the overall permeability remains constrained unless they can link neighboring pore clusters, as commonly observed in organo-clay composites. Furthermore, the pore morphology and fractal features of shale rocks can exhibit noteworthy variations subjected to sedimentology, mineralogy, diagenesis and OM maturation.
Bare nanoscale zero-valent iron (NZVI) particles in aqueous suspensions aggregate into micron to submicron sizes. The transport process of enlarged aggregates or multi-sized aggregates is different from that of nanoparticles. In this work, we performed aggregate size distribution analysis of NZVI suspension using a laser grain size analyzer and conducted a series of continuous injection column experiments with different injected NZVI concentrations. The results show that aggregates in NZVI suspensions range from submicron to submillimeter size and are mainly distributed around 5–9 μm and 50–100 μm. Quantitative calculation of iron transport and retention showed that the retained iron linearly correlates with injected concentration. The cross-section images revealed that clogging weakened from inlet to outlet. Furthermore, larger aggregates (>40 μm) appeared more often in the rising-declining stages of breakthrough curves, whereas small aggregates (<30 μm) dominated the steady stage. Indeed, relatively preferential flow facilitated the transport and discharge of both large and small iron aggregates. Straining of glass beads especially for the large iron aggregates resulted in a decline in breakthrough. Moreover, the blocking of attached and plugged iron prevented later retention of iron, resulting in a certain concentration of iron in the effluents. Our study provides greater insight into the transport of NZVI.
Karst groundwater systems are critical to water supply and ecological sustainability in northern China, yet their heterogeneity poses challenges for flow characterization. The Yuquan Mountain (YM) Spring, historically a major karst spring in western Beijing, has experienced persistent drying, raising concerns about its recharge and flow mechanisms. This study integrates published isotope data, spatial distributions of Na+ and Cl− as hydrochemical tracers, groundwater age estimates, and geophysical survey results to assess the recharge sources and flow pathways within the YM Spring catchment area. The analysis identifies two major recharge zones: the Tanzhesi area, primarily recharged by direct infiltration of precipitation through exposed carbonate rocks, and the Junzhuang area, which receives mixed recharge from rainfall and Yongding River seepage. Three potential flow pathways are proposed, including shallow flow along faults and strata, and a deeper, speculative route through the Jiulongshan-Xiangyu syncline. The synthesis of multiple lines of evidence leads to a refined conceptual model that illustrates how geological structures govern recharge, flow, and discharge processes in this karst system. These findings not only enhance the understanding of subsurface hydrodynamics in complex geological settings but also provide a scientific basis for future spring restoration planning and groundwater management strategies in the regions.