To lessen quenching residual stresses in aluminum alloy components, theory analysis, quenching experiments, and numerical simulation were applied to investigate the influence of temperature-dependent material properties on the evolution of plastic strain and stress in the forged 2A14 aluminum alloy components during quenching process. The results show that the thermal expansion coefficients, yield strengths, and elastic moduli played key roles in determining the magnitude of plastic strains. To produce a certain plastic strain, the temperature difference increased with decreasing temperature. It means that the cooling rates at high temperatures play an important role in determining residual stresses. Only reducing the cooling rate at low temperatures does not reduce residual stresses. An optimized quenching process can minimize the residual stresses and guarantee superior mechanical properties. In the quenching process, the cooling rates were low at temperatures above 450 °C and were high at temperatures below 400 °C.
Disassembly line balancing (DLB) is a crucial optimization item in the recycling and remanufacturing of waste products. Considering the variations in the number of operators assigned to each station, this study investigates DLBs with six distinct station configurations: single-manned, multi-manned, single-robotic, multi-robotic, single-manned–robotic, and multi-manned–robotic setups. First, a unified mixed-integer programming (MIP) model is established for Type-I DLBs with each configuration to minimize four objectives: the number of stations, the number of operators, the total disassembly time, and the idle balancing index. To obtain more solutions, a novel bi-metric is proposed to replace the quadratic idle balancing index and is used in lexicographic optimization. Subsequently, based on the unified Type-I models, a unified MIP model for Type-II DLBs is established to minimize the cycle time, the number of operators, the total disassembly time, and the idle balancing index. Finally, the correctness of the established unified models and the effectiveness of the proposed bi-metric are verified by solving two disassembly cases of lighters and hairdryers, which further shows that the mathematical integration method of unified modeling has significant theoretical value for the multi-objective optimization of the DLBs with six distinct station configurations.