The ceramics industry dedicated to the manufacture of building materials is a very significant cause of environmental pollution, and various research projects are being carried out to reduce the associated environmental impact. One of the most important research lines is the generation and development of new materials, from waste, through more sustainable production processes. All of this is framed in circular mining. In this research study, geopolymers were developed with biomass bottom ashes and brick dust in order to replace the traditional ceramics used to construct bricks. For this, different families of test tubes were formed with different percentages of both residues, and their physical and mechanical properties were studied. In this way, the properties of geopolymers could be compared with traditional ceramics. In addition, in order to determine the cause–effect relationships between physical properties and compressive strength, data were processed using fuzzy logic and data mining techniques. The results showed the feasibility of geopolymers generation with biomass bottom ashes and brick dust with acceptable properties to replace conventional ceramics. In addition, the fuzzy logic analysis allowed for establishing clear and objective relationships between the physical properties and the compressive strength of the geopolymers, with the aim of developing the highest quality geopolymer.
Mining activities are essential for a population’s development; however, they also produce negative effects such as the production of waste, an impact on flora and water pollution. On the other hand, construction is one of the sectors which is most demanding of raw materials, with one of the main such materials being water. For this reason, this research evaluates the feasibility of incorporating water contaminated by mining waste into ceramic materials for bricks. In this way, the use of water is reduced and, on the other hand, the contaminating elements of the mining water are encapsulated in the ceramic matrix. To achieve this, the clay used and the contaminated water were first analysed, then different families of samples were conformed with different percentages of contaminated water. These samples were tested to determine their physical and mechanical properties. At the same time, leachate tests were carried out to determine that the ceramic material created did not cause environmental problems. The test results showed that the physical and mechanical properties of the ceramics were not influenced by the addition of contaminated water. On the other hand, the leachate tests showed that encapsulation of most of the potentially toxic elements occurred. However, the use of contaminated water as mixing water for ceramics could only be performed up to 60%, as higher percentages would leach impermissible arsenic concentrations. Accordingly, a new way of reusing water contaminated by mining activities is developed in this study, taking advantage of resources, avoiding environmental pollution and creating economic and environmentally friendly end products.