The Pan and Parapan American Games (PA15) are the third largest sporting event in the world and were held in Toronto in the summer of 2015 (10–26 July and 7–15 August). This was used as an opportunity to coordinate and showcase existing innovative research and development activities related to weather, air quality (AQ), and health at Environment and Climate Change Canada. New observational technologies included weather stations based on compact sensors that were augmented with black globe thermometers, two Doppler lidars, two wave buoys, a 3D lightning mapping array, two new AQ stations, and low-cost AQ and ultraviolet sensors. These were supplemented by observations from other agencies, four mobile vehicles, two mobile AQ laboratories, and two supersites with enhanced vertical profiling. High-resolution modeling for weather (250 m and 1 km), AQ (2.5 km), lake circulation (2 km), and wave models (250-m, 1-km, and 2.5-km ensembles) were run. The focus of the science, which guided the design of the observation network, was to characterize and investigate the lake breeze, which affects thunderstorm initiation, air pollutant transport, and heat stress. Experimental forecasts and nowcasts were provided by research support desks. Web portals provided access to the experimental products for other government departments, public health authorities, and PA15 decision-makers. The data have been released through the government of Canada’s Open Data Portal and as a World Meteorological Organization’s Global Atmospheric Watch Urban Research Meteorology and Environment dataset.
1 February 2020 in Bulletin of the American Meteorological Society
The goal of the Canadian Arctic Weather Science (CAWS) project is to conduct research into the future operational monitoring and forecasting programs of Environment and Climate Change Canada in the Arctic where increased economic and recreational activities are expected with enhanced transportation and search and rescue requirements. Due to cost, remoteness and vast geographical coverage, the future monitoring concept includes a combination of space-based observations, sparse in situ surface measurements, and advanced reference sites. A prototype reference site has been established at Iqaluit, Nunavut (63 degrees 45'N, 68 degrees 33'W), that includes a Kaband radar, water vapor lidars (both in-house and commercial versions), multiple Doppler lidars, ceilometers, radiation flux, and precipitation sensors. The scope of the project includes understanding of the polar processes, evaluating new technologies, validation of satellite products, validation of numerical weather prediction systems, development of warning products, and communication of their risk to a variety of users. This contribution will provide an overview of the CAWS project to show some preliminary results and to encourage collaborations.
15 October 2021 in Hydrology and Earth System Sciences
Collection efficiency transfer functions that compensate for wind-induced collection loss are presented and evaluated for unshielded precipitation gauges. Three novel transfer functions with wind speed and precipitation fall velocity dependence are developed, including a function from computational fluid dynamics modelling (CFD), an experimental fall velocity threshold function (HE1), and an experimental linear fall velocity dependence function (HE2). These functions are evaluated alongside universal (KUniversal) and climate-specific (KCARE) transfer functions with wind speed and temperature dependence. Transfer function performance is assessed using 30 min precipitation event accumulations reported by unshielded and shielded Geonor T-200B3 precipitation gauges over two winter seasons. The latter gauge was installed in a Double Fence Automated Reference (DFAR) configuration. Estimates of fall velocity were provided by the Precipitation Occurrence Sensor System (POSS). The CFD function reduced the RMSE (0.08 mm) relative to KUniversal (0.20 mm), KCARE (0.13 mm), and the unadjusted measurements (0.24 mm), with a bias error of 0.011 mm. The HE1 function provided a RMSE of 0.09 mm and bias error of 0.006 mm, capturing the collection efficiency trends for rain and snow well. The HE2 function better captured the overall collection efficiency, including mixed precipitation, resulting in a RMSE of 0.07 mm and bias error of 0.006 mm. These functions are assessed across solid and liquid hydrometeor types and for temperatures between −22 and 19 ∘C. The results demonstrate that transfer functions incorporating hydrometeor fall velocity can dramatically reduce the uncertainty of adjusted precipitation measurements relative to functions based on temperature.