By their unique compositions and microstructures, recently developed high-entropy materials (HEMs) exhibit outstanding properties and performance above the threshold of traditional materials. Wear- and erosion-resistant materials are of significant interest for different applications, such as industrial devices, aerospace materials, and military equipment, related to their capability to tolerate heavy loads during sliding, rolling, or impact events. The high-entropy effect and crystal lattice distortion are attributed to higher hardness and yield stress, promoting increased wear and erosion resistance in HEMs. In addition, HEMs have higher defect formation/migration energies that inhibit the formation of defect clusters, making them resistant to structural damage after radiation. Hence, they are sought after in the nuclear and aerospace industries. The concept of high-entropy, applied to protective materials, has enhanced the properties and performance of HEMs. Therefore, they are viable candidates for today’s demanding protective materials for wear, erosion, and irradiation applications.
Transition metal borides have a unique combination of high melting point and high chemical stability and are suitable for high temperature applications (>2000 °C). A metastable dual-phase boride (Ti0.25V0.25Zr0.25Hf0.25)B2 with distinct two hexagonal phases and with an intermediate entropy formation ability of 87.9 (eV/atom)−1 as calculated via the density functional theory (DFT) was consolidated by pulsed current sintering. Thermal annealing of the sintered dual-phase boride at 1500 °C promoted the diffusion of metallic elements between the two boride phases leading to chemical homogenization and resulted in the stabilization of a single-phase high-entropy boride. Scanning electron microscopy, in situ high temperature x-ray diffraction, and simultaneous thermal analysis of the as-sintered and annealed high-entropy borides showed the homogenization of a dual-phase to a single-phase. The experimentally obtained single-phase structure was verified by DFT calculations using special quasirandom structures, which were further used for theoretical investigations of lattice distortions and mechanical properties. Experimentally measured mechanical properties of the single-phase boride showed improved mechanical properties with a hardness of 33.2 ± 2.1 GPa, an elastic modulus of 466.0 ± 5.9 GPa, and a fracture toughness of 4.1 ± 0.6 MPa m1/2.
This study aimed to develop and validate a mathematical model for predicting ozone propagation and distribution in a bench-scale storage silo of soybean and link the model results to its application as an antifungal. The reduction of potentially toxigenic fungi found in soybeans was also evaluated after the ozone treatment. Experimental validation consisted of the ozone application and concentration (ozone) monitoring at the experimental silo outlet. The soybean grains were analyzed prior to and after ozone treatment from different portions of the silo to evaluate the antifungal activity. After 30 minutes of ozone exposure, there was an 88% reduction in the amount of fungi present at the lower section, reaching total elimination with longer exposure times. Fusarium was the main genus found, and it was significantly reduced even with the shortest exposure (30 min). The results of the ozone propagation in soybeans will be useful to better understand its behavior within silos, in order for the elimination of biological contaminations to occur. The model showed ozone spread through the silo, and this treatment showed to be an effective alternative to control against potentially toxigenic fungi found in soybeans.
27 August 2025 in Journal of the European Ceramic Society