Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam’s substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage.
To address the problems of cumbersome processes, large data, and error accumulation in the calculation of conventional GNSS precipitable water volume (PWV), the multi-factor PWV conversion models were established using the multiple linear regression fitting method. This paper analyzed the correlation between PWV and zenith tropospheric delay (ZTD), surface temperature (T), and atmospheric pressure (P) based on the data from 38 GNSS stations in the China region from 2017 to 2018. The research results showed that the mean deviation of the one-factor PWV conversion model based on the GNSS-ZTD was 12.16 mm, and its RMS was 14.30 mm. After adding surface temperature as an independent variable to form the two-factor PWV conversion model, the mean deviation and RMS decreased to 9.07 mm and 11.15 mm. The mean deviation of the two-factor PWV conversion model based on atmospheric pressure and GNSS-ZTD was 0.31 mm, and its RMS was 0.39 mm. The mean deviation of the three-factor PWV conversion model based on surface temperature, atmospheric pressure, and GNSS-ZTD was 0.33 mm, and its RMS was 0.38 mm. The accuracies of the two-factor and three-factor PWV conversion models were similar. The external precision assessment of PWV conversion models was verified by 12 GNSS stations unused for the modelling establishment. The mean deviation and RMS of the two multi-factor PWV conversion models were both less than 0.16 mm and 0.33 mm, which proves their widespread applicability in the China region.
Reservoir sedimentation reduces operational performance, while large-scale dredging and capacity expansion redistribute earth materials and alter engineering conditions at aging plain reservoirs. This study integrates Sentinel-1 time-series Interferometric Synthetic Aperture Radar (InSAR), multitemporal optical imagery, and ICESat-2 and Sentinel-3A altimetry to characterize the engineering transformation and associated deformation at Suyahu Reservoir, China. Optical imagery documented land-based excavation, cofferdam construction, and subsequent reinundation. Under comparable instantaneous water levels, the mapped water surface area increased from approximately 72.06 km2 in April 2020 to 87.45 km2 in April 2025, an increase consistent with changes in reservoir-bed topography and shoreline morphology. Satellite altimetry showed that the mean water level decreased from about 52.62 m before construction to 52.15 m during the main construction period, while the mean annual observed range narrowed from 1.33 to 0.68 m before increasing again from mid-2023 onward. InSAR revealed spatially heterogeneous negative line-of-sight velocities reaching approximately −40 mm/a along localized embankment sections and −50 mm/a along the monitored margins of the artificial islands. Lagged cross-correlation analysis identified no statistically significant correlations between water level variations and the monitored embankment displacement. The spatial correspondence between deformation and project-modified areas supports a plausible first-order interpretation based on local excavation, fill placement, and construction histories.