The space-based infrared observatory of aircraft in the air has the advantages of wide-area, full-time, and passive detection. The optical design parameters for space-based infrared sensors strongly rely on target observed radiation, but there is still a lack of insight into the causes of aircraft observation properties and the impact of instrument performance. A simulation model of space-based observed aircraft infrared characteristics was constructed for this provision, coupling the aircraft radiance with background radiance and instrument performance effects. It was validated by comparing the model predictions to data from both space-based and ground-based measurements. The validation results reveal the alignment between measurements and model predictions and the dependence of overall model accuracy on the background. Based on simulations, the radiance contributions of aircraft and background are quantitatively evaluated, and the detection spectral window for flying aircraft and its causes are discussed in association with instrumental performance effects. The analysis results indicate that the target-background (T-B) contrast is higher in the spectral ranges where aircraft radiation makes an important contribution. The background radiance plays a significant role overall, while the observed radiance at 2.5–3μm is mainly from skin reflection and plume radiance. The skin-reflected radiation absence affects the model reliability, and its reduction at nighttime reduces the T-B contrast. The difference in T-B self-radiation and the stronger atmospheric attenuation for background contribute to the higher contrast at 2.7 μm compared to the other spectral bands.
Realistic modeling of high-resolution earth radiation signals in the visible-thermal spectral domain remains difficult, due to the complex radiation interdependence induced by the heterogeneous and rugged features of land surface. To find the trade-off between accuracy and efficiency for image simulation, this paper established a unified simulation framework for the entire visible-thermal spectral domain, based on the energy balance between solar-reflected and thermal radiation components over rugged surfaces. Considering the joint contributions of atmospheric and topographic adjacency effects, three spatial–spectral convolution kernels were uniformly designed to quantify the topographic irradiance, the trapping effect, and the atmospheric adjacency effect. Radiation signal simulation was implemented in three forms: land surface temperature (LST), bottom of atmosphere (BOA) radiance, and top of atmosphere (TOA) radiance. The accuracy was validated with onboard data from China’s Gaofen-5 visual and infrared multispectral sensor (VIMS) over rugged desert. The simulation results demonstrate that the root mean square of relative deviations between the simulated and onboard TOA radiance are related to terrain, as 3–17% and 6–38% for the summer and winter scene, respectively. The evaluation of radiance components indicates the utility of the simulation framework to quantify the uncertainty associated with atmosphere and terrain coupling effects, in the sensor design and operation stages.
The traditional evaluation calculation method fails to adequately consider the impact of image degradation and ignores the uncertainty caused by instrument noise on point target detectable status. This overestimates the detection capability of the system and cannot meet the needs of the point target detection evaluation under space-based observations. An image-driven evaluation metric (IDEM) is proposed in this paper, considering the effects of image degradation on the target, the background, and its clutter signals while providing coefficients of variation (CVs) for evaluation metrics. Image sequences of aircraft in different bands of the infrared imaging system were generated for cross validation. A comparative analysis against the traditional method shows that instrument noise significantly interferes with the point target signal in the image, and our method provides a more accurate and comprehensive evaluation of aircraft detectability under space-based infrared observations. Based on this, the IDEM maps under day and night in the mid- and long-infrared were computed and analyzed under space-based infrared observations of the flying aircraft. The results indicate that the mid-wave infrared (MWIR) is more sensitive to diurnal variation, whereas the long-wave infrared (LWIR) is more stable but has a lower daytime detectability compared to mid-infrared. Theoretically, both mid- and long-infrared enable night detection capabilities for point targets under the proper conditions, with mid-infrared offering higher detection potential. Our works provide new insight and approaches for the point target detection evaluation, system design, and on-orbit testing.