We designed a stepwise approach for co-sensitization of a zinc porphyrin sensitizer (LD12) with a spirally configured organic dye (CD5) for dye-sensitized solar cells. The co-sensitized LD12 + CD5 device showed significantly enhanced VOC and JSC relative to its individual single-dye sensitized devices. Upon optimization, the device made of the LD12 + CD5 system yielded JSC/mA cm−2 = 16.7, VOC/V = 0.74, FF = 0.73 and η = 9.0%; this performance is superior to that of either individual device made from LD12 (η = 7.5%) and CD5 (η = 5.7%) under the same conditions of fabrication. To understand the effects of the potential shift and charge recombination on the cell performance, we measured charge-extraction (CE) and intensity-modulated photovoltage spectra (IMVS). Upon sensitization with each dye, the TiO2 potentials are similar, but co-sensitization causes the potential to shift down (cathodic shift). Charge recombination was significantly retarded for the co-sensitized system relative to each individual dye-sensitized system, to account for the enhanced VOC for the former relative to the latter. A test of stability indicates a systematic trend between the LD12 + CD5 and LD12 devices; the performance of the co-sensitized device degraded only ∼15% and remained stable during the period of 500–1000 h near 295 K.
Co-sensitization of two or more dyes with complementary absorption spectra on a semiconductor film is an effective approach to enhance the performance of a dye-sensitized solar cell (DSSC). Porphyrin sensitizer YD2-oC8 showed outstanding photovoltaic performance co-sensitized with an organic dye to cover the entire visible spectral region, 400–700 nm. To promote the light-harvesting capability beyond 700 nm, a porphyrin dimer (YDD6) was synthesized for a co-sensitized system. We report a systematic approach for engineering of molecular co-sensitization of TiO2 films in a cocktail solution containing YD2-oC8, an organic dye (CD4) and YDD6 in a specific molar ratio to optimize the photovoltaic performance of the device. The resulting device showed panchromatic spectral features in the IPCE action spectrum in the region 400–700 nm attaining efficiencies of 75–80%; the spectrum is extended to the near-IR region attaining 40–45% in 700–800 nm region, giving JSC/mA cm−2 = 19.28, VOC/mV = 753, FF = 0.719, and η = 10.4% under standard AM 1.5 G one-sun irradiation. This performance is superior to what is obtained from the individual single-dye devices and the two-dye co-sensitized systems. The shifts of TiO2 potential upon dye uptake and the kinetics of charge recombination were examined through measurements of the charge extraction (CE) and intensity-modulated photovoltage spectroscopy (IMVS), respectively. Five co-sensitized systems were investigated to demonstrate that suppression of dye aggregation of YDD6 in the co-sensitized film is a key factor to further improve the device performance.
A highly efficient and mild method for azido glycosylation of glycosyl β-peracetates to 1,2-trans glycosyl azides was developed by using inexpensive FeCl3 as the catalyst. In addition, we demonstrated, for the first time, that FeCl3 in combination with copper powder can promote 1,3-dipolar cycloaddition (click chemistry) of azido glycosides with terminal alkynes. Good to excellent yields were obtained with exclusive formation of a single isomer in both glycosyl azidation and subsequent cycloaddition processes.
A pseudo-enantiomeric pair of optically switchable helicenes containing a catalytic 4-N-methylaminopyridine (MAP) bottom unit and a C2-symmetric, (10R,11R)-dimethoxymethyl-dibenzosuberane top template was synthesized. They underwent complementary photoswitching at 290 nm (P/M′, 99) and 340 nm (P/M′, 91/9) and unidirectional thermo-rotation at 130 °C (P/M′, >99/<1). They were utilized to catalyze enantiodivergent Steglich rearrangement of O- to C-carboxylazlactones, with formation of either enantiomer with up to 91% ee (R) and 94% ee (S), respectively.
18 December 2014 in Organic & Biomolecular Chemistry
A series of oxometallic species and metal acetylacetonates (acac) was examined as catalysts for oxidative carbonylation of styrene with benzaldehyde using t-butylhydroperoxide as the co-oxidant in warm acetonitrile. Among them, VO((acac)2 and vanadyl(IV) chloride were found to be the only catalyst class to achieve cross-coupling processes by judiciously tuning the ligand electronic attributes, leading to β-hydroxylation– and β-peroxidation–carbonylation of styrene, respectively, in a complementary manner. Mechanistic studies indicated that vanadyl-associated acyl radicals generated by t-butoxy radical-assisted, homolytic cleavage of the aldehyde C–H bond were involved in tandem processes with an exclusive syn diastereoselectivity in the case of β-methylstyrene.