The application of the European Water Framework Directive on water quality for human consumption and industrial activities creates a need for water quality assessment and monitoring systems. The MIGR'HYCAR research project was initiated to provide decisional tools for risks connected to oil spills in continental waters. In this paper, the focus is set on a numerical model to simulate oil spill in continental waters and to estimate polycyclic aromatic hydrocarbons (PAHs) toxicity in the aquatic environment. A Lagrangian/Eulerian approach is proposed. The Lagrangian model describes the transport of an oil spill near the free surface. The oil spill model enables to simulate the main processes driving oil plumes: advection, diffusion, evaporation, dissolution, spreading and volatilization. Though generally considered as a minor process, dissolution is important from the point of view of toxicity. To model PAHs dissolution in water, an Eulerian advection–diffusion model is used. Laboratory experiments were conducted to characterize the numerous kinetics of dissolution and volatilization processes. Model validation was carried out with the following test cases: transport processes based on the well-documented seawater spill (advection), weathering processes based on laboratory experiments cited in the literature (spreading and evaporation processes) and artificial river test measurements (dissolution and volatilization).
Water resource management and flood forecasting are crucial societal and financial stakes requiring reliable predictions of flow parameters (depth, velocity), the accuracy of which is often limited by uncertainties in hydrodynamic numerical models. In this study, we assess the effect of two uncertainty sources, namely breach characteristics induced by overtopping and the roughness coefficient, on water elevations and inundation extent. A two-dimensional (2D) hydraulic solver was applied in a Monte Carlo integration framework to a reach of the Loire river (France) including about 300 physical parameters. Inundation hazard maps for different flood scenarios allowed for the highlighting of the impact of the breach development chronology. Special attention was paid to proposing a relevant sensitivity analysis to examine the factors influencing the depth and extent of flooding. The spatial analysis of the vulnerability area induced by a levee breach width exhibits that, with increasing the flood discharge, the rise of the parameter influence is accompanied by a more localized spatial effect. This argues for a local analysis to allow a clear understanding of the flood hazard. The physical interpretation, highlighted by a global sensitivity analysis, showed the dependence of the flood simulation on the main factors studied, i.e., the roughness coefficients and the characteristics of the breaches.
Selecting appropriate performance measures is crucial for calibrating numerical flood models with satellite images, as differences between performance measures can significantly impact model predictions. The present study reports a step‐by‐step methodology to guide the selection of performance measures to compare numerical simulations of a flood event with a satellite image, for purposes of model calibration or validation. Faced with a set of performance measures, practitioners need to assess which are most suitable for comparing observed and simulated flood maps. First, a correlation analysis was conducted to determine the relationships between various performance measures. A series of criteria were then applied to evaluate the sensitivity of the performance measures with respect to flood extent, satellite characteristics (position and orientation), and errors in measurement or processing (raw satellite values or extraction of flood maps). The performance measures meeting the most criteria were then ranked based on the identifiability of parameter values with regard to observation errors. The methodology is discussed numerically in the context of a single flood event (on the Garonne River in France in February 2021), using a distribution of water depths simulated from a shallow‐water model (parameterized by an uncertain friction field). The methodology was shown to be useful in the study case in identifying 4 performance measures out of 24. The proposed methodology is intended to be generic, and therefore, applicable to any flood model or flood event.
Water resource management and flood forecasting are crucial societal and financial stakes requiring reliable predictions of flow parameters (depth, velocity), the accuracy of which is often limited by uncertainties in hydrodynamic numerical models. In this study, we assess the effect of two uncertainty sources, namely breach characteristics induced by overtopping and the roughness coefficient, on water elevations and inundation extent. A two-dimensional (2D) hydraulic solver was applied in a Monte Carlo integration framework to a reach of the Loire river (France) including about 300 physical parameters. Inundation hazard maps for different flood scenarios allowed highlighting the impact of the breach development chronology. A special attention was paid to proposing a relevant sensitivity analysis to exam the factors influencing the depth and extent of flooding. The spatial analysis of vulnerability area induced by a levee breach width exhibits that, with increasing the flood discharge, the rise of the parameter influence is accompanied by a more localized spatial effect. This argues for a local analysis to allow a clear understanding of the flood hazard. The physical interpretation, highlighted by a global sensitivity analysis, showed precisely the dependence of the flood simulation on the main factors studied, i.e. the roughness coefficients and the characteristics of the breaches.
1 January 2025 in International Journal of Sediment Research