A closely located dual-band meander-line antennas with isolation enhancement by inserting novel split electromagnetic bandgap (EBG) uniplanar structure is proposed. The meander-line antenna is coupled to a parasitic rectangular patch to achieve the dual-band operation. Splits are applied on the surface of an EBG structure to cause decoupling at the first resonant mode and utilizing an EBG structure to decouple at the second resonant mode. The prototype of the proposed structure achieves a dual band of 180 MHz (3.42-3.6 GHz) and 400 MHz (4.7-5.1 GHz). The mutual coupling is significantly reduced by 26 and 44 dB at 3.48 and 4.88 GHz, respectively, compared to the reference antenna. In addition, the structure has high front-to-back ratio radiation characteristics.
21 October 2010 in IEEE Transactions on Microwave Theory and Techniques
A novel generalized coupled-line circuit structure for a dual-band Wilkinson power divider is proposed. The proposed power divider is composed of two coupled lines with different even- and odd-mode characteristic impedances and two lumped resistors. Using rigorous even- and odd-mode analysis, the analytical design equations for this proposed power divider are obtained and the ideal closed-form scattering parameters are constructed. Since the traditional transmission line is a special case of coupled line (coupled coefficient is zero), it is found that traditional noncoupled-line dual-band (including single band) Wilkinson power dividers and previous dual-band coupled-line power dividers are special cases of this generalized power divider. As a typical example, which could only be designed by using this given design equations, a compact microstrip 3-dB power divider operating at both 1.1 and 2.2 GHz is designed, fabricated, and measured. There is good agreement between calculated and measured results.
12 December 2008 in IEEE Transactions on Microwave Theory and Techniques
This paper presents an unequal Wilkinson power divider operating at arbitrary dual band without reactive components (such as inductors and capacitors). To satisfy the unequal characteristic, a novel structure is proposed with two groups of transmission lines and two parallel stubs. Closed-form equations containing all parameters of this structure are derived based on circuit theory and transmission line theory. For verification, two groups of experimental results including open and short stubs are presented. It can be found that all the analytical features of this unequal power divider can be fulfilled at arbitrary dual band simultaneously.
4 September 2009 in IEEE Microwave and Wireless Components Letters
In this letter, we propose a practical three-section dual-band transformer, which can terminate frequency-dependent complex load impedance at two arbitrary bands simultaneously. Analytical equations are derived to achieve the exact closed-form solutions. Numerical examples are examined to verify the validity. This three-section transformer can be utilized to match the complex load impedance with unequal values at two different frequencies, such as microwave amplifiers based on transistors, mixers, various kinds of antennas, and so forth.
Advanced three-dimensional (3D) imaging techniques can acquire high-resolution 3D biomedical and biological data, but available digital display methods show this data in restricted two dimensions. 3D light-field displays optically reconstruct realistic 3D image by carefully tailoring light fields, and a natural and comfortable 3D sense of real objects or scenes is expected. An interactive floating full-parallax 3D light-field display with all depth cues is demonstrated with 3D biomedical and biological data, which are capable of achieving high efficiency and high image quality. A compound lens-array with two pieces of lens in each lens unit is designed and fabricated to suppress the aberrations and increase the viewing angle. The optimally designed holographic functional screen is used to recompose the light distribution from the lens-array. The imaging distortion can be decreased to less than 1.9% from more than 20%. The real time interactive floating full-parallax 3D light-field image with the clear displayed depth of 30 cm can be perceived with the right geometric occlusion and smooth parallax in the viewing angle of 45°, where 9216 viewpoints are used.
9 November 2010 in IEEE Transactions on Microwave Theory and Techniques
In this paper, a novel closed-form design method of generalized Wilkinson power dividers is proposed. By using this method, the power divider could be designed to be arbitrary-way (N-way) with arbitrary power division, and arbitrary dual-band operations in a pure planar structure. A previous dual-band unequal Wilkinson power divider is extended to arbitrary terminal impedances case, thus, it can be used to construct multiway planar power dividers through the combination of the two-section dual-frequency transformers. To obtain three-way (or any odd-way) power dividers with dual-band and unequal power division features, a new developed recombinant structure is employed. This recombinant structure consists of a two-way dual-band unequal power divider/combiner without any isolation structures. Furthermore, the complete design procedures and analytical equations of these proposed generalized power dividers are presented. To verify our proposed design approach in theory, several three-way and four-way power dividers with different dual-band applications and various power divisions are designed and simulated. Finally, a practical three-way power divider operating at both 0.6 and 2.45 GHz with a power dividing ratio of 3:5:1 is fabricated in microstrip technology as a typical example. The measured results of the fabricated power divider verify our proposed idea.