Mechanical metamaterials exhibit some superior mechanical properties such as ultrahigh strength-to-weight ratio, negative bulk-modulus, negative stiffness, negative mass-density, and negative Poisson's ratio. These advantages led to a variety of applications, especially in vibration isolation, by targeting and tuning for a specific frequency-range called stopband. The tuning ability is achieved from its array of unit-cells, which can be topologically optimized for the desired frequency range. This review discusses the development of mechanical metamaterials and focuses on its vibration control applications by using passive and active approaches for stopband enhancement and broadening the bandwidth at varying frequency-ranges.
This work introduces a novel metastructure designed for quasi-zero-stiffness (QZS) properties based on the High Static and Low Dynamic Stiffness mechanism. The metastructure consists of four-unit cells arranged in parallel, each incorporating inclined beams and semicircular arches. Under vertical compression, the inclined beams exhibit buckling and snap-through behavior, contributing negative stiffness, while the semicircular arches provide positive stiffness through bending-dominated behavior. The design procedure to achieve QZS is established and validated through finite element analysis and experimental investigations. The static analysis confirms a QZS region for specific displacement. Dynamic behavior is analyzed using a nonlinear dynamic equation solved using the Harmonic Balance Method, validated experimentally with transmissibility curves showing sudden jump down with effective vibration isolation. Parametric studies with varied payload masses and excitation amplitudes further verify the ability to of metastructure to attenuate vibrations effectively in low-frequency ranges.