The moisture sorption isotherms (MSI) of a dry-crystallizedPalada payasammix and its thermodynamic properties were investigated using the dynamic vapor sorption (DVS) method at 20, 30, and 40 degrees C over a range of water activity (a(w)) from 0.10 to 0.90. The MSI were found to closely follow a J-shape curve, conforming to Type-Iota Iota Iota of Brunauer-Deming-Deming-Teller classification. The Guggenheim-Anderson-de Boer (GAB), Peleg, Iglesias, and Chirife models best described the sorption behavior ofPalada payasammix with a good fit to the sorption data at all three temperatures. The analysis for sorbed water based on the Caurie's model revealed an inverse trend with temperature for the number of adsorbed sites, percent bound water, and surface area while the density increased with temperature. The isosteric heat of sorption computed using the Clausius-Clapeyron equation for the dry mix was found to exponentially decrease from 55.23 to 44.29 kJ mol(-1)with increase in moisture content from 1% to 40%. The spreading pressure increased witha(w)and decreased with temperature at a constanta(w). The domination of enthalpy-driven process in the sorption of the mix was established using the compensation theory. The X-ray diffractogram of the product confirmed a crystalline fraction of 65% in the mix. Practical applications A convenience mix formulation forPalada payasamwas developed using dry-crystallization technique, wherein sugar and milk solids are crystallized as a dry coat over cookedada(rice starch) flakes. The moisture sorption behavior and the thermodynamics of sorption of the dry-crystallizedPalada payasammix analyzed in this study would become as a reference to optimize the final moisture content of this product category and specify its appropriate storage conditions. The sorption data presented will be useful to predict as well as improve the physical, microbiological, and chemical stability of this dry mix during storage. Furthermore, the quantified thermodynamic properties would help in understanding the interaction and binding between the moisture and sorption sites in the product.
24 May 2022 in Food Science and Technology International
The present work was undertaken to investigate the feasibility of pre-treatment of raw milk with Pulse Electric Field (PEF) treatment before its entry into the processing chain. A custom-designed and fabricated PEF applicator was used for the non-thermal treatment protocol. Raw milk was treated under three treatment protocols, viz., conventionally heat treatment (CHT), PEF treated milk subjected to conventional heat treatment (PT-CHT) and PEF treatment (PT). For the PT protocol, milk was subjected to high voltage (55 kV) square wave of pulse width 900 µs, for 100 s at a frequency of 90 Hz. The treated milk was then converted to two popular products, namely and paneer and khoa, which were evaluated for its physico-chemical, microbiological, sensory quality and shelf stability. Since khoa is a heat desiccated product, it was evaluated only against PT-CHT and CHT treatments. It was observed that PT treatment resulted in paneer with softer body with higher whiteness index, compared to other experimental samples. The PT treatment did not affect the product acceptability and the product had a shelf stability of 12 days under refrigeration, as against 16 days for CHT and PT-CHT treatment. The treatment protocols for milk did not significantly affect the quality and shelf life of khoa. Thus, there is wide future scope to used pulsed electric fields treatment synergistically with conventional heat treatment for inactivation of microorganisms, with better retention of nutritional and physical properties of product which has potential to save considerable amount of energy and time during processing of product.
23 April 2021 in Journal of Food Science and Technology
An attempt was made to design, fabricate and evaluate a heat exchanger for controlling the matting temperature of Paneer during pressing. Based on preliminary investigations, the range of process parameters to be evaluated during the pressing of Paneer was selected as: pressure (2, 3, and 4 kg/cm2), matting temperature (63, 66 and 69 °C) for pressing time of 8, 10 and 12 min. Experiments were designed in a central composite design for 20 runs and the Paneer was evaluated for its moisture content, hardness, springiness, chewiness, cohesiveness, bulk density, porosity and sensory attributes. It was observed that with increasing pressure and matting temperature, the hardness of the product increased; this corresponded with reduced moisture content and porosity of the product. The springiness of the samples correlated linearly with increasing matting temperature and pressing time. Increasing the pressure during pressing resulted in poorer sensory scores. The process conditions for pressing of Paneer under controlled matting conditions were optimised using Response Surface Methodology for moisture content, overall acceptability, hardness and springiness of the pressed product. It was observed that the moisture content of Paneer pressed under controlled matting temperature was marginally lower than the control Paneer, the overall acceptability for the experimental samples was higher with superior body and texture scores.