UDAYAKUMAR RAJAMANICKAM

Dr. UDAYAKUMAR RAJAMANICKAM

orcid

Research Focus & Metrics

Academic Career Length

24Years (2003-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 March 2004 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
URUDAYAKUMAR RAJAMANICKAM
UDAYAKUMAR RAJAMANICKAM
SSS. Sundaram
S. Sundaram
KSK. Sivakumar
K. Sivakumar
The main objective of this investigation is to improve the performance of a diesel engine, to clean it's exhaust by fumigating methanol and to achieve maximum diesel replacement. The experimental study was carried out in a single cylinder diesel engine. A heat exchanger was provided to preheat the inlet air. The experimental setup was such that the methanol was fumigated in the heat exchanger very near to intake manifold. The result shows an appreciable reduction of emissions such as oxides of Nitrogen, smoke density and marginal increase in the performance when compared with normal diesel engine.

3 March 2003 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
URUDAYAKUMAR RAJAMANICKAM
UDAYAKUMAR RAJAMANICKAM
SSS. Sundaram
S. Sundaram
RSR. Sriram
R. Sriram
In today's modern world the internal combustion engine has a predominant role in stationary low power generation and a virtual monopoly in mobile application. It has been seen that one of the main pollutant from the exhaust is NOx. In this work we are discussing one of the method to reduce this emission by introducing water into the combustion chamber through the inlet manifold during suction stroke. The experimental part of the work involves the fabrication of a separate water injection system consisting of pump and an injector being driven by the engine itself. Water is introduced in the inlet manifold and different performance tests like heat balance, load test and emission measurements are conducted on a Kirloskar Engine. The effect of water on different factors like Brake Thermal Efficiency, Fuel Consumption, NOx, CO, Unburned Hydrocarbon and CO2 at different load conditions is studied. From the graphs of emission readings for different water fuel ratio (W / F) ratio it has been found that with the increase in W / F ratio there is a slight decrease in the brake thermal efficiency, a constant decrease in NOx, a negligible change in CO and a slight increase in the HC. From the different graphs a range of optimum water fuel ratio is chosen at which it is seen that the decrease in the NOx emissions doesn't cause too much decrease in the engine efficiency.

22 June 2023 in Energies
Verified
Journal Article
Open access
PDF file
SPSundar kamalesan perumal pillai
Sundar kamalesan perumal pillai
URUDAYAKUMAR RAJAMANICKAM
UDAYAKUMAR RAJAMANICKAM
Shashank KhuranaShashank Khurana
Shashank Khurana
Biodiesel is widely known as the alternative fuel for the diesel engine, but it comes with its fair share of challenges. To minimize the pertinent drawbacks, fuel additives become an essential tool and help improve renewable fuel’s properties. In this current research, biodiesel is obtained from rice bran oil and cotton seed oil, with diethyl ether as an additive. Diethyl ether is known for good oxygen content, high cetane number, and low viscosity. Experiments were performed on a variable compression ratio engine at a compression ratio of 18:1, and the injection pressure (170 bar, 180 bar, 190 bar and 200 bar) and the injection timing (20, 21, 22 and 23°bTDC) with four different dual biodiesel blends (5%, 10%, 15% and 20% by volume). Different ratios of 1%, 2.5% and 5% of diethyl ether with biodiesel combination were examined in a single-cylinder, four-stroke diesel engine. The engine emission and performance features were discussed at different loads and constant engine speeds. It was observed that using 5% of diethyl ether with biodiesel blends improved brake thermal efficiency, brake-specific fuel consumption and decreased carbon dioxide and oxides of nitrogen emissions. The reduction of oxides of nitrogen emission contributes to biodiesel’s acceptability for the environment’s benefit. This investigation found that diethyl ether, along with dual biodiesel blends, has a better viability in diesel engines.

31 March 2019 in International Journal of Control and Automation
Verified
Journal Article
Closed access
KKKesar M. K.
Kesar M. K.
URUDAYAKUMAR RAJAMANICKAM
UDAYAKUMAR RAJAMANICKAM
KRKarthikeyan Ram
Karthikeyan Ram
VSVishweshwar S.
Vishweshwar S.
NRNikitha R
Nikitha R

3 March 2003 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
URUDAYAKUMAR RAJAMANICKAM
UDAYAKUMAR RAJAMANICKAM
PAP. Valan Arasu
P. Valan Arasu
SSS. Sriram
S. Sriram
In today's modern world the internal combustion engine has a predominant role in stationary low power generation and a virtual monopoly in mobile applications. Concentrations emitted from the internal combustion engines thus build up to levels sufficient to have adverse effects on plants and animals. In Compression Ignition (CI) Engines turbulence of the charge plays a vital role in combustion process. The generation of suction swirl using a shrouded inlet valve is one way to achieve the desired level of turbulence. The shrouded inlet valve is capable of modifying the droplet size distribution of the fuel spray as well as producing a more ignitable and burnable mixture, which contributes to the reduction in the NOx content in the exhaust. The experimental part of the paper involves the fabrication of shrouded valves of different length of shroud. Load test and emission tests were carried out on a stationary four stroke C.I.Engine. The test results are analyzed and it is concluded that lower levels of emissions are achieved by shrouding. Even though there is a slight decrease in power output from the engine, the advantages of lowering the emission levels achieved through shrouding provides the basis for the trade off between power and emission.

8 March 2004 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
URUDAYAKUMAR RAJAMANICKAM
UDAYAKUMAR RAJAMANICKAM
MAM.S Anand
M.S Anand
An effort has been made in this work to understand the physical phenomenon behind combustion in DI diesel engine and to evaluate its performance through a mathematical model. The model developed consists of two phases - the spray model and the combustion model. In the spray model a 2-D axis-symmetric grid is considered. The spray dispersion, penetration, and the cells that are ready for ignition at the end of ignition delay are found from the spray model. Some of the empirical relations from wave break model and that available in the literature are used to model the spray. A numerical technique is used to solve the conservation equations of mass, momentum and energy in the combustion model to evaluate the properties at each crank angle. The model is also used to determine mass fractions burnt, pressure, temperature, heat release at each crank angle and performance parameters. To validate the simulation results, test has been conducted on a single cylinder four stroke Kirloskar DI diesel engine and a reasonable agreement is found between the computed and the experimental results.