Sail-assisted technology can reduce greenhouse-gas emissions by saving the energy consumption of ships with wind energy utilization. The distribution characteristics of marine wind resources are critical to the energy-saving effect of sail-assisted ships. However, due to the lack of effective energy-saving evaluation methods for improving the utilization rate of wind energy, a high potential for wind energy utilization still exists. A novel energy-saving evaluation method based on the wind energy resource analysis of typical ship routes is proposed in this paper. First, a three-degree-of-freedom motion model for sail-assisted ships considering the wing sail forces is constructed. Then, a wind resource acquisition and analysis method based on spatial–temporal interpolation is proposed. On this basis, the wind field probability matrix and wing sail force matrix are established. Ultimately, an energy-saving evaluation method for sail-assisted ships on typical routes is proposed by combining the sailing condition of ships. The case study results show that the energy-saving effect of a wing sail-assisted oil tanker that sailed on the China-to-Middle East route was more than 5.37% in 2021 and could reach 9.54% in a single voyage. It is of great significance to realize the popularization and application of sail-assisted technology, thus improving the greenization of the shipping industry.

Wing-assisted technology is an effective way to reduce emissions and promote the decarbonization of the shipping industry. The lifting and lowering of wing-sail is usually driven by hydraulic system. Leakage, as an important failure form, directly affects the safety as well as the functioning of hydraulic system. To increase the system reliability and improve the wing-assisted effect, it is essential to conduct leakage fault diagnosis of lifting and lowering hydraulic system. In this paper, an AMESim simulation model of lifting and lowering hydraulic system of a Very Large Crude Carrier (VLCC) is established to analyze the operation characteristics of the hydraulic system. The effectiveness of the model is verified by the operation data of the actual hydraulic system. On this basis, a wavelet packet transform (WPT)-based sensitive feature extracting method of leakage fault for the hydraulic system is proposed. Subsequently, a support vector machine (SVM)-based multi-classification model and diagnosis method of leakage fault are proposed. The study results show that the proposed method has an accuracy of as high as 97.5% for six leakage fault modes. It is of great significance for ensuring the reliability of the wing-sail operation and improving the utilization rate of the offshore wind resources.