This work proposes a facile methodology for producing porous biochar material (ABC) from açaí kernel residue, produced by chemical impregnation with ZnCl2 (1:1) and pyrolysis at 650.0 °C. The characterization was achieved using several techniques, and the biochar material was employed as an adsorbent to remove catechol. The results show that ABC carbon has hydrophilic properties. The specific surface area and total pore volume are 1315 m2·g−1 and 0.7038 cm3·g−1, respectively. FTIR revealed the presence of oxygenated groups, which can influence catechol adsorption. The TGA/DTG indicated that the sample is thermally stable even at 580 °C. Adsorption studies showed that equilibrium was achieved in <50 min and the Avrami kinetic model best fits the experimental data, while Freundlich was observed to be the best-fitted isotherm model. Catechol adsorption on ABC biochar is governed by van der Waals forces and microporous and mesoporous filling mechanisms. The Qmax is 339.5 mg·g−1 (40 °C) with 98.36% removal of simulated effluent, showing that açaí kernel is excellent biomass to prepare good biochar that can be efficiently used to treat real industrial effluents.
13 April 2024 in Separation and Purification Technology
This study reported a one-spot preparation of magnetic composite carbon (MCC@Fe) from microcrystalline cellulose (MC). The pure cellulose was impregnated in iron (III) chloride solution and carbonized at 650 °C. The MCC@Fe composite adsorbent underwent various characterization techniques. XRD identified nanostructured Fe3O4 particles with an average crystallite size of 34.3 nm embedded in the core subunits of the material. FESEM images indicated a rough and irregular surface, with some cavities along its surface, incorporating Fe3O4 nanoparticles, while EDS analysis confirmed the presence of elements like Fe, C, and O. Notably, combining thermal and chemical treatments produces a composite with more pores and a high specific surface area (500.0 m2 g−1) compared to MC (1.5 m2/g). VSM analysis confirmed the magnetic properties (0.76 emu/g), while the Hydrophobic Index (HI) showed that MCC@Fe was hydrophobic (HI 1.395). The adsorption studies consisted of kinetic, mass transfer, equilibrium, and thermodynamics studies. Kinetic study of the adsorption of paracetamol on MCC@Fe composite proved to be rapid, and the time necessary for covering 95% of the surface (t0.95) was lower than 27 min following the fractal-like pseudo-first-order model (FPFO). Liu’s isotherm proved to be the most appropriate for understanding the adsorption equilibrium. Remarkably, the maximum sorption capacity (Qmax) of paracetamol was 34.78 mg g−1 at 45 °C. The ΔH° value (+27.00 kJ/mol) and the negative ΔG° values were consistent with the physisorption mechanism and favorable process. Furthermore, the mass transfer mechanism showed that the transfer is governed by the intraparticle diffusion model, with surface diffusion being the rate-limiting step when considering the Biot number greater than 100. This research displayed a single-route production of inexpensive magnetic nano adsorbents capable of efficiently eliminating paracetamol from aqueous environments.
6 November 2025 in Journal of the Taiwan Institute of Chemical Engineers
Este artigo tem por objetivo realizar um estudo qualitativo sobre as características teóricas encontradas na literatura referentes a técnica de mapeamento conceitual e as metodologias ativas de ensino, para assim compreender como os mapas conceituais podem ser utilizados como uma estratégia de inovação pedagógica. A base teórica encontra-se fundamentada na teoria da aprendizagem significativa de David Ausubel e no construcionismo de Seymour Papert. Torna-se possível afirmar que a utilização dos mapas conceituais no processo de ensino-aprendizagem corrobora com a teoria da aprendizagem significativa, assim como proporciona uma melhor aprendizagem dos conteúdos escolares.