The implementation of roller-integrated continuous compaction control (CCC) technology on three types of granite residual subgrade (GRS) was evaluated in this work; the three types of GRS are cement-treated GRS, GRS with aggregate, and natural GRS. Four common roller measurement values were calculated and analyzed: compaction meter value (CMV), compaction control value (CCV), machine drive power (MDP), and acceleration amplitude (AA). Both the sand cone test and the geodetic leveling test were conducted to evaluate the soil compaction efficiency during construction. Results revealed that cement-treated GRS could be compacted more easily than untreated materials with the same compaction effort. The correlation analyses between point measurements and roller measurement values indicate that the optimum roller measurement values for the cement-treated GRS, the GRS with aggregate, and natural GRS are CMV, AA, and CMV, respectively. Meanwhile, roller measurement values strongly rely on roller operation parameters and lift thickness, especially for the cement-treated GRS.
Soil-rock mixture is a commonly used geotechnical material used in many construction projects, such as slopes, tunnels, and dams. The shear strength of soil-rock mixture is its key property and is affected by many factors. This study aimed to investigate the shear strength characteristics of soil-rock mixture and the influences of moisture and stone content on shear strength parameters. Soil-rock mixture samples with four different stone and moisture contents were fabricated and tested using a large-scale direct shear test apparatus under four vertical pressures. The results demonstrated that the shear properties of the soil-rock mixture showed significant Mohr Coulomb failure criteria for all stone contents. As the moisture content increased, the shear strength of the soil-rock mixture first increased by 10~18% and then decreased after w = 12% to the residue value. The change in cohesion and internal friction angle of soil-rock mixture with different moisture contents shared a similar trend. For w < 12%, the cohesion and internal friction angle increased with moisture content, and for w > 12%, the two indexes obviously decreased. As the stone content increased from 30% to 60%, the shear strength of the soil-rock mixture increased by 82~174%. The internal friction angle increased linearly with stone content, while the cohesion of the mixture first increased and then decreased after the stone content reached 50%. The results can help in the designation and application of soil-rock mixture.
Intelligent compaction (IC) technology have been used for quality control and quality assurance (QC/QA) in subgrade construction. The effective regression correlations between Intelligent Compaction Measurement Values (ICMV) and In-situ Measurement Values (ISMV, including compaction degree and subgrade modulus ELWD) are the essential prerequisite of using IC technology for QC/QA. This paper presents the results from an experimental research study that was conducted from a practical subgrade project of China to explore the regression relationships between ICMV and ISMV. Three types of ICMV, including CMV, CCV and Evib, were collected along with the corresponding positions of the rollers. Two types of ISMV, containing compaction degree and ELWD, were measured by ring sampler method and light weight deflectometer (LWD) at specified test points, respectively. Based on these data, the influences of roller parameters and subgrade properties on the regression relationships of ICMV and ISMV were investigated. In addition, linear regression and 5 nonlinear regression algorithms were compared. The results suggest that ICMV reflect the stiffness of subgrade more than reflecting the density. In the regression of ICMV and ISMV, subgrade properties are more important than roller parameters while both of them should not be neglected. The influences of underlying stiffness and roller amplitude are linear while that of roller speed and moisture content are nonlinear. Nonlinear algorithms, especially the random forest, have the better performance compared to linear algorithm. Moreover, the combination of random forest and linear algorithm can further improve the accuracy of ISMV prediction.
16 March 2018 in International Journal of Pavement Engineering
A 3D extended finite element model (XFEM) was constructed to investigate the thermal reflective cracking propagation and anti-cracking characteristic of geotextile. Influence factors of tensile modulus and placement location of geotextile were analysed. A temperature cycling test in the material test system was utilised in this work to validate the XFEM. Thermal simulations were performed considering the influences of solar radiation, air convection and air radiation. It has been found that crack initiated and propagated as temperature declining in earlier cycle, and crack length being fixed because of no more severe temperature variation based on maximum principal stress criterion. Geotextile with high tensile modulus had a significant influence on reducing the crack propagation compared with low tensile modulus geotextile or unreinforced situation. Geotextile placing at the bottom of asphalt surface had the best crack resistance influence, and geotextile placed at one-fourth depth from asphalt course bottom was more efficient than placed at other locations in terms of anti-crack propagation.
Intelligent compaction (IC) is an innovative and modified technology used for quality control in subgrade digital construction. However, current intelligent compaction measurement values (ICMVs) cannot provide accurate measurement of the filling layer when the strength of the underlying layer is relatively high. Experimental field tests conducted in the cut to fill subgrade were performed to collect and analyze the variability of ICMV called the vibration modulus (Evib). Furthermore, a new ICMV called the modulus of vibration compaction (Evc) that could remove the interference of the underlying layer and reveal the actual compaction state of filling layer is presented based on the theoretical analysis and numerical simulation method. It was also extracted to study the variability of the filling layer’s compaction state. The results of the above research indicate the influence of the underlying layer’s stiffness on overall compaction quality is remarkable. It was found that it is more likely to achieve the variability control of the compaction state of the filling layer by a new ICMV called Evc. The measured data, improved approaches, and associated conclusions that are presented provide valuable information for researchers and employees considering the use of IC technology.
1 March 2017 in Journal of Materials in Civil Engineering
To highlight the influence of cement addition on laboratory characterization of lateritic gravel and the feasibility of cement–lateritic gravel for use in base construction, relatively comprehensive laboratory experiments were carried out on cement–lateritic gravels from République du Mali in Africa. It is shown, that although natural laterite gravels were gap-graded due to the lack of sand-sized and silt-sized particles, the aggregate breakdown and addition of cement would change the gradation and that the cement–lateritic gravel met the strength requirement for base-course construction in Africa. However, low contents of clay mineral properties of the fine grains in lateritic gravel resulted in the ineffectiveness of the cement reactions between lateritic gravel and cement, and then cement–lateritic gravels had poor water stability.
About Me
Jinsong Qian is a Professor who studies highway and airport engineering.
Jinsong Qian is a Professor who studies highway and airport engineering.