In traditional power grids, the unidirectional flow of energy and information has led to a decrease in efficiency. To address this issue, the concept of microgrids with bidirectional flow and independent power sources has been introduced. The components of a microgrid utilize various IoT protocols such as OPC-UA, MQTT, and DDS to implement bidirectional communication, enabling seamless network communication among different elements within the microgrid. Technological innovation, however, has simultaneously given rise to security issues in the communication system of microgrids. The use of IoT protocols creates vulnerabilities that malicious hackers may exploit to eavesdrop on data or attempt unauthorized control of microgrid devices. Therefore, monitoring and controlling security vulnerabilities is essential to prevent intrusion threats and enhance cyber resilience in the stable and efficient operation of microgrid systems. In this study, we propose an RBAC-based security approach on top of DDS protocols in microgrid systems. The proposed approach allocates roles to users or devices and grants various permissions for access control. DDS subscribers request access to topics and publishers request access to evaluations from the role repository using XACML. The overall implementation model is designed for the publisher to receive XACML transmitted from the repository and perform policy decision making and enforcement. By applying these methods, security vulnerabilities in communication between IoT devices can be reduced, and cyber resilience can be enhanced.
Traditional unidirectional power systems that produce large-scale electricity and supply it using an ultra-high voltage power grid are changing globally to increase efficiency. Current substations’ protection relays rely only on internal substation data, where they are located, to detect changes. However, to more accurately detect changes in the system, various data from several external substations, including micro-grids, are required. As such, communication technology regarding data acquisition has become an essential function for next-generation substations. Data aggregators that use the GOOSE protocol to collect data inside substations in real-time have been developed, but data acquisition from external substations is challenging in terms of cost and security, so only internal substation data are used. This paper proposes the acquisition of data from external substations by applying security to R-GOOSE, defined in the IEC 61850 standard, over a public internet network. This paper also develops a data aggregator based on R-GOOSE, showing data acquisition results.
25 May 2023 in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
This study presents a novel active vibration control (AVC) system on motor driven power steering (MDPS) to reduce interior noise reduction caused by operating the MDPS in an electric vehicle. MDPS is electronic power steering (EPS). The MDPS attached to the rack gear of power steering system is called R-MDPS. Operating of the R-MDPS generates a structural vibration of R-MDPS, and the vibration is transmitted to car body through mounts of car subframe. The vibrating body of car becomes a monopole and dipole sources of vibroacoustic noise generated inside car. This vibracoustic noise is a structure borne noise and makes passenger annoyance. To reduce interior noise inside a car directly, active noise control (ANC) has been used as active method and is a useful method for active cancellation of the low frequency noises less than 400Hz. However, in this study, because the frequency range of interior noise due to operation of R-MDPS is higher than 400Hz, the AVC system is employed and is applied to active cancellation of the vibration transmitted to car body through the subframe mounts. For application of AVC to test car, the control force is required and the actuator for generation of control force should be install on the mounts. For application of AVC to test car, the control force is required and the actuator for generation of control force should be inserted in the mount between subframe and R-MDPS. It requires an extra rework of test car. In this study to study the feasibility for the application of AVC system to R-MDPS, the test jig, which composes of R-MDPS and subframe of test car, is made and is set up in the laboratory. All study on AVC is performed in the laboratory. The proposed method is successfully applied to the active cancellation of vibration at target point of subframe. The developed method is going to be applied to the AVC of real test vehicle.